Question about 1995 Jaguar XJ6
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
What you need to do is remove the 2 screws on the top bezel from inside the engine bay, then underneath the outer corner of the plastic headlamp surround there is a philips screw, (put your head under neath car near from wheel) loosen the screw, do not remove it, now the headlamp plastic bezel/surround will come free enough so you can get a philips screwdriver in through the middle of the headlamp surround, there is a chrome retaining ring holding the headlamp in place, loosen the 3 philips screws (do not remove) The retaining ring will rotate and you can slide the ring out from the outer edge of the headlamp surround. The headlamp will then come out throught the middle of the surround, disconnect the 3 pin multiplug and reverse process for install.
Posted on Sep 19, 2008
no there is'nt enough pressure underneath to make it leak try tighting up the valve cover bolts or just getting a new gasket about a $6.00 to $10.00 dollar fix depending on where you go
Posted on Dec 02, 2008
Is it not keeping time or what? Mike. Rate 100% please.
Posted on Sep 22, 2009
Testimonial: "Don't know if I have a solution yet, or not. But so far the experience has been good."
Tips for a great answer:
Dec 14, 2012 | 1996 Jaguar Vanden Plas
Nov 18, 2012 | 1996 Jaguar Vanden Plas
Apr 27, 2011 | 1995 Jaguar Vanden Plas
Dec 29, 2010 | 1996 Jaguar Vanden Plas
Dec 28, 2010 | 1996 Jaguar Vanden Plas
Dec 22, 2010 | 1991 Jaguar XJ6
Nov 09, 2009 | 1996 Jaguar Vanden Plas
Oct 19, 2009 | 1990 Jaguar XJ6
61 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: