Question about 2000 Saturn SL

1 Answer

I hope you can help. All 4 turn signal lights are

I hope you can help. All 4 turn signal lights are not working, nor is the indicators within the car. Same for the hazards. A friend suggested a fuse which they though might be located in the consul to the right of the gas pedal (below the stereo). I can see what looks like a small black box. Would this be the problem?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 196 Answers

Check the passenger side center by the gear shift see the door pop the cover off there is the fuse box the main power disturbustion center under the hood black box by the battery hope this helps

Posted on May 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have sourced out all fuses and bulbs, yet continue to have a rapid right turn signal. I don't know where else to look. help?


replace the right rear bulb. the quick flashing indicates a bad bulb. it could be a wiring problem to the rear for the signal light that you will have to check out starting at the socket and working forward.

Mar 29, 2015 | 2005 Chevrolet Uplander

1 Answer

Turn signal not working


TAIL LIGHT NOT WORKING

It can be faulty tail light bulb or its issue with tail light control switch or its wiring's are short.

Check the voltage at fuse slot of tail light.Do you receive 12 volt there.If not,then it says tail light switch is not receiving power supply.


---------

There are few help links related to your problem.I suggest you refer the list and check the help links.Click the link below:-----




Turn Signal Not working

http://technoanswers.blogspot.com/2012/11/turn-signal-not-working.html

----------

Right turn signal not working on Pontiac Car?

http://schematicsdiagram.blogspot.com/2011/12/right-turn-signal-not-working-on.html

--------

Only one side indicator light working on car?

http://schematicsdiagram.blogspot.com/2011/12/only-one-side-indicator-light-working.html

-----------

Turn signals not working on 1987 Jeep Wagoneer?

http://schematicsdiagram.blogspot.com/2011/12/turn-signals-not-working-on-1987-jeep.html

-----------

SOLVE YOUR 4 WAY FLASHER RELATED PROBLEMS HERE

http://repairhelpcenter.blogspot.com/2012/11/4-way-flasherturn-signal-flashersignal.html

----------

1994 Toyota Camry: Bypass Tail light Relay Circuit?

http://whatisbyme.blogspot.in/2012/04/1994-toyota-camry-bypass-tail-light.html

-----------

2008 Toyota RAV4: Replace Tail light Lens Cover?


http://technoanswers.blogspot.in/2012/04/2008-toyota-rav4-replace-tail-light.html

--------

2003 Chevrolet S10 Tail light Fuse

http://schematicsdiagram.blogspot.com/2012/11/2003-chevrolet-s10-tail-light-fuse.html

---------

Chevrolet Parking light and Tail lamp light Wiring diagram

http://schematicsdiagram.blogspot.com/2012/11/chevrolet-parking-light-and-tail-lamp.html

----------

Car Tail Lights Not Working?

http://schematicsdiagram.blogspot.com/2011/12/car-tail-lights-not-working.html

----------

These details will help.

Thanks.

Feb 15, 2013 | 2004 Pontiac Grand Am

1 Answer

The tail lights do not work. The headlights, blinkers, and brake lights work. I checked the fuses and they are all good.


It can be faulty tail light bulb or its issue with tail light control switch or its wiring's are short.

Check the voltage at fuse slot of tail light.Do you receive 12 volt there.If not,then it says tail light switch is not receiving power supply.


---------
There are few help links related to your problem.I suggest you refer the list and check the help links.Click the link below:-----
1994 Toyota Camry: Bypass Tail light Relay Circuit? http://whatisbyme.blogspot.in/2012/04/1994-toyota-camry-bypass-tail-light.html

-----------
2008 Toyota RAV4: Replace Tail light Lens Cover?


http://technoanswers.blogspot.in/2012/04/2008-toyota-rav4-replace-tail-light.html
--------
2003 Chevrolet S10 Tail light Fuse http://schematicsdiagram.blogspot.com/2012/11/2003-chevrolet-s10-tail-light-fuse.html
--------- Chevrolet Parking light and Tail lamp light Wiring diagram http://schematicsdiagram.blogspot.com/2012/11/chevrolet-parking-light-and-tail-lamp.html
---------- Car Tail Lights Not Working?

http://schematicsdiagram.blogspot.com/2011/12/car-tail-lights-not-working.html

----------
Turn Signal Not working http://technoanswers.blogspot.com/2012/11/turn-signal-not-working.html
---------- Right turn signal not working on Pontiac Car?

http://schematicsdiagram.blogspot.com/2011/12/right-turn-signal-not-working-on.html

--------
Only one side indicator light working on car?

http://schematicsdiagram.blogspot.com/2011/12/only-one-side-indicator-light-working.html

-----------
Turn signals not working on 1987 Jeep Wagoneer? http://schematicsdiagram.blogspot.com/2011/12/turn-signals-not-working-on-1987-jeep.html

-----------

SOLVE YOUR 4 WAY FLASHER RELATED PROBLEMS HERE
http://repairhelpcenter.blogspot.com/2012/11/4-way-flasherturn-signal-flashersignal.html

----------
Thesedetails will help.
Thanks.

Nov 23, 2012 | Cars & Trucks

1 Answer

I have a 2005 Chevy Tahoe and the hazards come on when I use my left turn signal occasionally. The right turn signal works fine.


hi.

i am not sure if you mean your hazard lights actually come on, or if all 4 indicators come on at the same time.
hazards coming on would suggest a fault in the indicator switch, or a short in the wiring.

all 4 indicators coming on, would suggest a bad earth connection on the rear left side of the vehicle. this is far more likely, and can be cured by tracing the earth wire to teh body of the car, and check for loose, damaged wires, or corrosion at the earth point on the body.

easy way to tell, is to switch on the tail lights at the same time. if these get brighter and dimmer in time with the indicators, it is almost certainly an earth fault.

hope this helps

Jul 12, 2011 | 2005 Chevrolet Tahoe

1 Answer

I have a 2001 Pontiac Firebird. When i start my car, my left turn signal light comes on but the right front turn signal light remains off. If i turn my lights on, the right turn signal light then comes...


Perhaps a dicky connection somewhere. Perhaps corrosion, even moisture in the connection plugs. Inspect all connections to your indicator lights. Also check for worn or damaged wires. Also Have a look inside the lenses of the lights to see if the the globes are corroded or have water ingress etc and causing shorts to other wiring within the lighting circuits.

You may also consider turn indicator lever to on to indicate truniong right, make sure the engine off. Have someone watch right indicator and literally grab the plugs/leads to the indicator globe and give them a shake to see if the fault goes away. If it doe stop intermitantly then it will help point you in the correct area.

Jun 10, 2011 | Pontiac Firebird Cars & Trucks

2 Answers

How can I reset service light on 2008 Volvo V50


OTE: If the service interval indicator flashes it may be caused by one of the service interval indicator parameters not being programmed. This can only be carried out using suitable diagnostic equipment. Always check for any stored trouble codes as this may affect the resetting of the service interval indicator.
Ensure all doors are closed. Turn ignition key to position I. Press and hold reset button [A] 104667 07, 116126 07 Immediately turn ignition key to position II (within 2 seconds). Keep button [A] depressed until service message has been reset. A yellow warning light [B] will illuminate when it is time to release button [A]. Release reset button [A] within 4 seconds. There will be an audible signal when reset is complete. If reset button is not released within 4 seconds, the service interval indicator will not be reset.
RESET BUTTON IS TRIP BUTTON

Jun 08, 2011 | 2008 Volvo V50

1 Answer

The SRS light will go off. Tell how to turn it off.


Hi, you cannot turn it off rather you have to reset it by following the instruction below...
  1. Turn ignition switch off, remove service connector cover.
  2. Connect (jump) the MES (Memory Erase Signal) connector (this is 2 pin connector wrapped on yellow plugged in the front of the under dash fuse box).
  3. Turn ignition switch on.
  4. SRS light will come on for 6 secs then go out, remove the jumper within 4 secs after the light goes out..
  5. The SRS light will come on again, reconnect the jumper within 4 secs after the light has come on.
  6. The SRS light will go off, remove the jumper with in 4 secs after the light has gone off.
  7. The SRS light will blink 2 times indicating the memory is reset.
  8. Turn the ignition switch to off and wait for 10 seconds.

May 25, 2011 | 1994 Honda Civic

2 Answers

Srs light on


1st you need to either buy or make the "SCS Service Connector" #07PAZ-0010100 from H and A Accesories for $3.51. Use a speaker harness for an older Honda which you can buy at a local stereo shop such as Circuit City or Best Buy, and cut the wires and looped them together. You can also use a paperclip but that will make it a little more difficult because you have to connect it and disconnect it a few times quickly. 2nd you need to find the MES (Memory Erase Signal) connector as pictured below scs_small.jpgsrs_plug_small.jpg
It is a yellow connector with two wires in it that is plugged into the fuse box, unplug it and pull it down. Once you have done that you can begin the process of erasing the memory. NOTE: This will only reset your SRS System if what caused it to trigger has been fixed, Ex: turning the ignition on with any SRS Plugs disconnected, such as pulling your seat out.

1st step in erasing the memory is to turn the ignition off and connect the SCS Service connector to the MES Plug.

2nd Turn Ignition on. SRS indicator light will come on for about 6 seconds then go off.

3rd Disconnect SCS service connector for MES connector within 4 seconds after SRS indicator light goes off. SRS indicator light will come on again.

4th Reconnect SCS service connector the MES connector within 4 seconds after SRS light comes on. SRS indicator light will go off.

5th Disconnect SCS service connector from MES connector within 4 seconds. SRS indicator light will indicate that memory is erased by blinking 2 times.

6th Turn ignition off, and wait 10 seconds. Start vehicle like normal and light should come on and go out like normal. You have reset your SRS light, congrats.

If it does not work the first time try it again, the timing has to be perfect. My first time it took me 3 attempts before it worked, but it did work.

Aug 16, 2009 | 2002 Honda Civic

1 Answer

No front lights work


check the headlight relays under the hood also fuses under the hood and in the interior fuse pannel.

Nov 18, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Saturn SL Logo

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...