Question about 2004 Dodge Ram

Open Question

04 dodge ram srt10 front wheel hub torque

04 dodge ram srt10 front wheel hub torque spec?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
countrysi248
  • 443 Answers

SOURCE: clicking noise from front hubs 2004 dodge ram 2500 diesel 4x4

First just crawl under it and grab your axles and see if you can shake them and get any movement from either of them this will tell you if you have a loose CV joint or not .. thanks Jerry holler if you need more .

Posted on Jan 30, 2009

Ad
  • 1 Answer

SOURCE: Clicking noise in front end 2001 dodge ram 4x4

the ansew i found is replacing the seal around the joint and from both end removing it and cleaning it out i had rocks in mine from going threw water and mud ita a all day deal but a twenty doller fix axle shaft oil seal is all i had to replace

Posted on Apr 26, 2009

alicantecoli
  • 22326 Answers

SOURCE: Changing front ball joints on Dodge 2500 2005

can it not be done without removing the hub ?? dont think you can get hub off without removing the track control ball joint?do you have the right tools??

Posted on May 30, 2009

  • 137 Answers

SOURCE: What size socket for a front wheel bearing hub nut

36mm

Posted on Jul 11, 2009

  • 15 Answers

SOURCE: what are the front axle nut torque specs for a

185 ft.lbs

Posted on Oct 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How much torque does a wheel bearing and hub replacement on a 2003 Dodge ram 1500 need


Wheel Bearing and Hub Assembly - Front (MPA WH515006)

Wheel Hub Assembly Axle Nut Torque Spec: 180 ft-lbs / 244Nm, tighten further to align cotter pin with hole. .

Feb 26, 2018 | Dodge Cars & Trucks

1 Answer

Torque specs for 2005 dodge ram front wheel bearing hub - 3 bolts


I need more info. Is this a 1500--2500--3500, 4wd or 2wd?

Feb 24, 2018 | Dodge Cars & Trucks

1 Answer

Front Skf hub bearing torque spec 2003 dodge ram 2500 turbo diesel



Tighten the spindle nut to 149 ft-lbs to seat the bearing then
. rotate the axle 5 to 10 times to seat the hub bearing, then
tighten the spindle nut to a final torque of 263 ft-lbs I would just use a good impact gun to get it there.

Oct 15, 2016 | Dodge Cars & Trucks

1 Answer

Need torque specs for front wheel bearing on 2004 dodge 3500 dually


The hub bearing retaining bolts are 150 ft. lbs the center axle nut primary torque 135 ft.lbs rotate 5-10 times increasing torque by 50 ft.lbs until final torque of 265 ft.lbs is reached

Mar 23, 2014 | 2004 Dodge Ram 3500 Truck

2 Answers

I need the torque specs for a 6 cyl 2004 Dodge Dakota 2 wheel drive- front wheel hub. In inch-lbs if possible.


Spindle nut. Tighten the nut to 185 ft. lbs. (251 Nm). Inch pounds is not an option, this critical torque spec is FT lbs.

Apr 26, 2011 | 2004 Dodge Dakota

1 Answer

I need the touque specs for the outer front axle nut on a 2005 dodge ram 2500 4x4


HUB AND BEARING ASSEMBLY NUTS TORQUE TO 125 FT LBS THE HALF SHAFT AXLE TORQUE TO 185 FT LBS.

Oct 16, 2010 | Dodge Ram 2500 Cars & Trucks

1 Answer

I think my front Drivers side wheel bearing is going out on my 2004 dodge ram 1500 4x4. It is an ABS system. What should I do to replace this? I wouldnt mind doing it myself if its the cheaper route.


Remove the wheel, the brake caliper with the mounting bracket and pads all together, the brake rotor, and the axle nut. Make sure the axle is free inside the hub splines by pushing it in a bit. I believe this truck has 3 bolts for the hub/bearing assy. They remove from the inboard side of the knuckle, then the hub/bearing assy comes out. It may be corroded in the knuckle, so some force may be required to get it out. To reassemble, reverse the steps, being careful to torque the axle nut to the proper spec. Also pump the brake pedal before you road test to verify the noise is gone.

Jun 27, 2009 | 2004 Dodge Ram 1500

Not finding what you are looking for?
2004 Dodge Ram Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

79851 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...