Question about 1998 Plymouth Breeze

1 Answer

Changing headlight bulbs on a 1998 plymoutyh breeze. from the rear? not much room to get hands in.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 267 Answers

No there is not. this was to make the dealer have to do it. sometimes you have to remove things like battery or air box. sometime you will have to remove the headlight. some cars require the bumper removed to remove headlight. so the answer here is look for the least amount of stuff you need to remove but expect to remove things to do it. good luck

Posted on May 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change the bulb in 1999 RAV-4


Instructions
    • Open the RAV4's hood and locate the headlight bulbs plugging into the rear of the headlight assemblies. Each assembly has two bulbs, one outer and one inner. Unplug the wiring harness from the rear of the burnt-out headlight, by pressing the locking button and pulling down on the harness.
    • 2Grab the rear of the bulb and rotate the bulb about a quarter turn counterclockwise to unlock it. Pull the bulb from the headlight assembly.
      3
    • Grab a new 9005 (high beam) or 9006 (low beam) bulb by its plastic base. Insert the bulb in the rear of the headlight assembly, lining up the tabs on the bulb with the notches in the headlight assembly, and twist it clockwise to lock the bulb in place. Do not touch the glass part of the headlight bulb, as the oils from your hands can cause the bulb to fail prematurely.
    • 4Plug the wiring harness into the receptacle on the rear of the bulb

Jun 27, 2012 | 1999 Toyota RAV4

1 Answer

Changing my headlights out of the 98 oldsmobile 88


how you doing. you have to pull the plastic clips behind the lights up and off bye hand or plyers. Should be 2 or 3 yes its a pain but has to be done. Then you can pull the headlight housing out to replace the bulb. hope this helps you. Luvmycarmobile302@yahoo.com

Mar 22, 2012 | 1998 Oldsmobile Eighty Eight

1 Answer

Changing passenger side low beam headlight bulb for 2001 Buick LeSabre Custom


there is very little room to gain access to the bulb from behind the headlight assembly.if you remove the plug for the headlight and then slide your hands down on either side of the bulb.there is a lock ring that you must remove(unlock)first.then pull the bulb out and install the new bulb and reassemble in reverse order.NOTE don`t touch the bulb glass with your hands or it can burn out prematurely from the oil on your skin.

Mar 15, 2011 | 2002 Buick LeSabre

1 Answer

How to change right front headlight


Drivers side? reach your hand by the alternator and over to the back of the headlight. You'll feel round rubber covers, pull this out and twist the bulb out.

Passengers side- take the aircleaner top off and move the air cleaner out of the way. Then you have a ton of room to change this bulb.

Jan 12, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

Changing head lights


This is kind of challenging. The headlight bulb is a rear mount, meaning the bulb has to come out of the back. In order to do this you need to remove the headlight assembly from the car ( open the hood and take out the retaining screws holding each assembly in place). Once you have the assembly out it is relatively easy to install new bulbs. The bulbs are Halogen and you should not touch the glass with your hands, since your body oil will cause a hot spot on the bulb and make it burn out. It is best to wipe the bulb with a cotton rag and rubbing alcohol as this will remove all oils on the bulb.

Dec 16, 2010 | 1998 Volkswagen Beetle

2 Answers

How do you change the turn signal blub


Hello, I can help you with this. There are 3 different ways to change the bulb. Method 1 If you have skinny arms and small hands, (I can't do it this way but I've seen it done), you can push the brake cooling duct at the front bumper down and back and reach inside and grab the bulb socket from there. Method 2, MANUALLY raise the headlight about halfway up, ( don't use the switch, it will auto-close after 15 minutes and you don't want your hand caught when it lowers), and remove the headlight surround shroud, that will give you enough room to reach the turn signal bulb socket. Method 3, remove the plastic panel underneath the car directly below the turn signal and reach up. Whichever way you decide on just grab the socket and turn clockwise to loosen the socket.

Mar 02, 2010 | 2001 Chevrolet Corvette

1 Answer

2004 yaris how do you change headlight bulb passenger side as there is no room for your hands to get in


to change passenger side headlight bulb,on 04 plate yaris, remove bulb cover at rear of lamp,take off fuse box,although this only gives you slightly more room,and have someone with small hands,replace bulb,as it is nearly impossible if you have large hands.It is awkward but can be done,EVENTUALLY.

Feb 05, 2010 | 2007 Toyota Yaris

3 Answers

How to replace a headlight bulb in a 98 plymouth breeze


these bulbs go in from behind the headlight assy. from under the hood look at the back of the headlight and locate the wiresgoing to the back of the headlight you can turn the connector or pull it out gently then turn the back of the bulb to remove it replacement is the reverse-- don't touch the glass of the new bulb, handle it by the base-fingerprints will shorten the life of a bulb of this type some parts stores will sell you the bulb and replace it for you if its not to hard for them-- too difficult then the automotive center at wally world or k mart will replace it for a fee

Nov 23, 2009 | 1998 Plymouth Breeze

1 Answer

How to change head light bulb toyota corolla 98. Difficult to reach bulb from engine compartment. Do I need to remove all head light assembly to change the bulb?


no!!!! its difficult, but possible... the headlights have a rubber cover over the wiring harness. pull it off, un plug the harness, and there is a metal wire bracket, hard to explain, if you check out the driver side first (easier to access) the other side should be a breeze. hope this helps

Nov 07, 2009 | 1998 Toyota Corolla

2 Answers

How to change the headlight on a honda civic si, need to change the light bulb, but can not get the headlight off.


It's been awhile since I've dealt with that particular model, but similiar models that were close to the same year didn't require the removal of the headlight. Access to change the bulb was obtained from the rear of headlight by squeezing clips together and turning at the same time counterclockwise (don't know how much access you'll have though on battery side). After that locking plastic holder is removed (assuming already unplugged b4 turning that is) slightly turn with minimal effort and should come right out.

Apr 09, 2009 | 1998 Honda Civic

Not finding what you are looking for?
1998 Plymouth Breeze Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...