Question about 2004 Chevrolet Monte Carlo

1 Answer

Do I have to replace the hole fuel line or just a clip?

Posted by on

  • Anonymous May 11, 2010

    You have to be more specific,as fuel lines, are not usually available from any source.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Theres a lock that u can purchase at any help center section at any auto parts store

Posted on May 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't remove a rubber fuel line with a strange metal fitting on it connecting it to one of the metal fuel lines.


As far as I can tell you are describing a pressed on clip. The only way off is to cut using a cutting pliers. I BELIEVE YOU ARE DESCIBING A LOW PRESSURE LINE. Just verify it first by calling the parts store or dealer. If so clip it off R/R the hose & install a new gas line w/ a clamp. Good Luck, Frank M

Feb 28, 2016 | 1993 Dodge D150

1 Answer

How to change 2003 kia optima sedan fuel filter


The fuel filter location varies with engine size on the Kia Optima. The 1.5-, 1.6- and 2.4-liter engines have the fuel filter located under the car in the front left corner of the fuel tank. The 1.8-liter engine has the fuel filter located on the driver's side firewall. All the filters have the same replacement procedure. There are actually two filters on the Kia Optima. A filter called a strainer is attached to the intake side of the fuel pump inside the fuel tank.

To change the filter follow this procedure:-

•Lift the hood and remove the cap on the fuse and relay box located on the driver's side fenderwell. Look at the bottom of the cap for the location of the fuel pump relay within the box. Pull the fuel pump relay out and lay it sideways in the box.

•2
Start the engine. It is not likely to start and even if it does it will only run for a second since the fuel pump relay has been removed, which disabled the fuel pump. This procedure will drop the fuel pressure in the fuel line. Raise the rear of the vehicle with the floor jack and support it by the frame with the jack stands. This is for engines 1.5, 1.6 and 2.4.

•3
Remove the fuel lines on both ends of the fuel filter. Use the scribe--a long pointy needle--to lift the white retainer straight up located in the center of the connector. This releases the fuel line from the fuel pump. Do the same to the other side of the fuel pump.

•4
Remove the bolt in the center of the fuel pump retainer bracket using a 10 mm socket. Pull the fuel pump out of the bracket.

•5
Insert the new fuel pump into the retainer bracket. Make sure that the inlet side faces the fuel line to the fuel tank and the outlet toward the fuel line to the engine. Install the fuel pump and bracket and tighten the bolt.

•6
Place a white retainer clip that came with the filter into the holes in each of the connectors. Just push it in enough to snap the bottom ends of the clip in place. The clip should now be standing straight up with just the bottom tips in the connectors. Push each of the fuel lines into the filter one at a time. Holding the fuel line tightly into the filter, push the white retainer clip down to lock the fuel filter and fuel line together. Lower the car and replace the fuel pump relay. Start the car and check for leaks.

Jun 19, 2014 | 2003 Kia Optima

1 Answer

Replace fuel filter on 2005 montego


You may need a certain tool for ford fuel lines to get the clips to come off. This job should only take about 10 min. locate the fuel filter,usually an in line. clip off either end to stop the flow of gas. quickly change one end at a time. replace with new clips.

Oct 14, 2012 | 2005 Mercury Montego

1 Answer

How to change a fuel pump on a 1992 Toyota carolla


Electric Fuel Pump-Fuel Injected REMOVAL & INSTALLATION The electric fuel pump is contained within the fuel tank. On 1988-92 models, it is necessary to remove the fuel tank from the vehicle in order to reach the pump. On 1993-97 models, the fuel pump can be accessed by removing the rear seat cushion and service hole cover. 1988-92 Models Fig. 1: Exploded view of the electric fuel pump 88275g77.gif
NOTE: Before disconnecting fuel system lines, clean the fittings with a spray-type engine cleaner. Follow the instructions on the cleaner. Do not soak fuel system parts in liquid cleaning solvent. CAUTION
The fuel injection system is under pressure. Release pressure slowly and contain spillage. Observe "no smoking/no open flame'' precautions. Have a Class B-C (dry powder) fire extinguisher within arm's reach at all times.
  1. Disconnect the negative battery cable and relieve the fuel pressure. Remove the filler cap.
  2. Remove the fuel tank from the vehicle.
  3. Remove the fuel pump bracket attaching screws, then remove the fuel pump/bracket assembly from the tank. Fig. 2: Remove the bolts retaining the pump bracket to the fuel tank 88275g78.gif

  4. Pull the lower side of the fuel pump from the bracket.
  5. Remove the nuts attaching the wires to the fuel pump.
  6. Disconnect the hose from the pump.
  7. Separate the filter from the pump. Use a small screwdriver to remove the attaching clip. Fig. 3: Pull off the lower portion of the pump from the bracket 88275g79.gif
    Fig. 4: If necessary, remove the clip and pull out the filter to replace it 88275g80.gif

  8. While the tank is out and disassembled, inspect it for any signs of rust, leakage or metal damage. If any problem is found, replace the tank.
  9. Inspect all of the lines, hoses and fittings for any sign of corrosion, wear or damage to the surfaces. Check the pump outlet hose and the filter for restrictions.
  10. When reassembling, ALWAYS replace the sealing gaskets with new ones. Also replace any rubber parts showing any sign of deterioration. To install:
  11. Install the pump filter using a new clip. Install the rubber cushion under the filter.
  12. Connect the outlet hose to the pump, then attach the pump to the bracket.
  13. Connect the wires to the fuel pump with the nuts.
  14. Install the fuel pump and bracket assembly onto the tank. Use new gaskets.
  15. Install the fuel tank.
  16. Start the engine and check carefully for any sign of leakage around the tank and lines. Road test the vehicle for proper operation.
1993-97 Models CAUTION
The fuel injection system is under pressure. Release pressure slowly and contain spillage. Observe no smoking/no open flame precautions. Have a Class B-C (dry powder) fire extinguisher within arm's reach at all times. Fig. 5: Exploded view of the fuel pump components 88275g81.gif
  1. Disconnect the negative battery cable. CAUTION
    On models with an airbag, wait at least 90 seconds from the time that the ignition switch is turned to the LOCK position and the battery is disconnected before performing any further work. Refer to Section 7 for all air bag warnings.
  2. Relieve the fuel pressure.
  3. Remove the rear seat cushion.
  4. Remove the floor service hole cover. Fig. 6: Remove the 4 service hole cover retaining screws 88275g82.gif

  5. Disconnect the electrical fuel pump wiring at the fuel pump assembly. Check for any fuel leakage while in there.
  6. Remove the gas cap, this will prevent any fuel gas spilling out of any high pressure lines.
  7. Using SST 09631-22020 or an equivalent line (flare nut) wrench, disconnect the outlet pipe from the pump bracket. Fig. 7: Disconnect the outlet pipe from the pump bracket 88275g83.gif

  8. Remove the pump bracket attaching screws.
  9. Disconnect the return hoses from the pump bracket, then pull out the pump/bracket assembly.
  10. Remove the nut and spring washer, then disconnect the wires from the pump bracket.
  11. Remove the sending unit attaching screws, then remove the unit from the bracket. Fig. 8: Pull the pump bracket with pump attached from the tank 88275g84.gif

  12. Pull the lower side of the fuel pump from the bracket.
  13. Unplug the connector to the fuel pump.
  14. Disconnect the hose from the pump.
  15. Separate the filter from the pump. Use a small screwdriver to remove the attaching clip.
  16. Inspect all of the lines, hoses and fittings for any sign of corrosion, wear or damage to the surfaces. Check the pump outlet hose and the filter for restrictions.
  17. When reassembling, ALWAYS replace the sealing gaskets with new ones. Also replace any rubber parts showing any sign of deterioration. To install:
  18. Install the pump filter using a new clip. Install the rubber cushion under the filter.
  19. Connect the outlet hose to the pump, then attach the pump to the bracket and tighten to 22-25 ft. lbs. (29-34 Nm).
  20. Engage the connector to the fuel pump.
  21. Install the fuel sending unit to the pump bracket.
  22. Install the fuel pump and bracket assembly onto the tank. Use new gaskets. Tighten the pump bracket retaining screws to 34 inch lbs. (4 Nm).
  23. Connect the return hoses to the pump bracket.
  24. Install the service hole cover, then the engage the fuel pump and sending unit connector.
  25. Install the rear seat cushion.
  26. Start the engine and check carefully for any sign of leakage around the tank and lines. Road test the vehicle for proper operation.
prev.gif next.gif

Jan 24, 2011 | 1992 Toyota Corolla

1 Answer

I have a 1995 Ford E-350 with a 5.8L engine.i am trying to replace the inline fuel filter. Your answer earlier about "plastic clips" is incorrect. Mine has steel spring clips that snap over the crimped on...


You will need a fuel line quick connect removal tool to release the inner clips holding the line in the filter.when you purchase the tool make sure you get the correct size for the line.

Jun 26, 2010 | Cars & Trucks

1 Answer

Leaking fuel pressure regulator


Release fuel pressure by removing fuel pump relay and turning engine over to release pressure. Place a rag to catch any fuel under regulator Fuel pressure regulator has a locking clip pry clip off remove vacuum line pull regulator out with twisting motion,replace fuel pressure regulator install clip connect vacuum line install relay. Check for leaks,your done.

Feb 23, 2010 | 2001 Pontiac Grand Am SE

1 Answer

How hard is it to replace a fuel injector?


Relieve the fuel pressure. Unplug the injector rail wire harness. Remove the two fuel rail mounting bolts and the small screw and clip that secure the lines to the exhaust camshaft housing. Pull strait out while wiggling the fuel rail. At the top of the injector,remove the clip and unplug the electric. Remove the clip on the bottom of the rail that holds the injector in. Pull the injector strait out. Check that the O-rings are still attached to the bottom of the injector and at the top. If not, CAREFULLY.. remove them from the holes that they were mounted in.

Jul 01, 2009 | 1997 Chevrolet Cavalier

1 Answer

Fuel line has pin hole-how to fix without replacing


You may need to go to the Part store and looking a glue or some kind of hole sealing kit or ask an employee at the back to see what they would suggest to seal it up. k hope that helps

May 10, 2009 | 1994 Buick Century

1 Answer

Fuel line clip replacement


depending on the style of the clip if it is the small white press in clip the clip can be bought separate

Mar 27, 2009 | 2006 Ford F-150

Not finding what you are looking for?
2004 Chevrolet Monte Carlo Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...