Question about 1994 Buick LeSabre
Obviously you'll want to check the fuses first as that's the easiest, but i think you may find that the problem is a bad common ground. Pull up the carpet a little near the drivers door opening and you should find a large group of ground wires. That area is a susceptible to water entry and with water comes corrosion. If you find it corroded clean it up as best as possible with a wire brush and reconnect everything and put some dielectric grease on the area.
Posted on May 10, 2010
Testimonial: "That is the best answer I have heard. Thank you."
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 15, 2018 | Buick Cars & Trucks
Mar 13, 2017 | 2002 Buick LeSabre
The interior lamp switch is in the ON position.
The keyless entry transmitter unlocks the doors (illuminated entry).
When the key is removed from the ignition switch with all of the doors closed, the courtesy lights light for approximately 25 seconds before fading out.
Battery positive voltage (B+) is applied at all times through the IP fuse block CTSY LP/PWR MIR fuse 6A via CKT 640 (ORN) through the body control module (MALL) to the courtesy lights via CKT 1732 (ORN). The MALL provides a ground through CKT 156 (WHT) for the courtesy lights under the following conditions:
The MALL receives an input from a door being opened.
The MALL receives an input from the interior lamp being turned ON.
The MALL receives an input from the doors being unlocked using the keyless entry transmitter.
The courtesy lamps then light.
When the courtesy lights are activated by opening and closing a door, the courtesy lights will remain on for approximately 25 seconds before fading out after all of the doors are closed. If the ignition switch is turned to START or RUN within the 25 seconds, the lights immediately begin to fade out. If a door is left open, the MALL removes battery positive voltage (B+) to the courtesy lights after 10 minutes. When the courtesy lights are activated by the interior lamp switch, the lights remain on as long as the interior lamp switch is in the ON position. When the courtesy lights are activated by unlocking the doors using the keyless entry transmitter, the lights remain on for approximately 40 seconds. If the doors are locked using the keyless entry transmitter within the 40 seconds, the lights immediately begin to fade out.
Body Control Module (MALL) Diagnostic Mode
For a detailed explanation of the MALL module diagnostic mode, refer to Body Control Module Cell 51.
What interior light ? Dome , courtesy lights etc....They don't work with switch, keyless entry , door opening ?
Dec 03, 2015 | Buick Cars & Trucks
Sep 15, 2015 | Buick Cars & Trucks
Jun 17, 2013 | 1994 Buick LeSabre
Apr 20, 2013 | 2005 Buick LeSabre Custom
Feb 10, 2012 | 1994 Buick LeSabre
Nov 30, 2017 | 2002 Buick LeSabre
Aug 27, 2011 | 1992 Buick LeSabre
Feb 01, 2011 | 1994 Buick LeSabre
306 people viewed this question
Usually answered in minutes!