Question about 2004 Nissan Sentra

1 Answer

I HAVE 6SPD SER SV ,AN MY CLUTCH IS STUCK TO THE FLOOR,CAN U TELL ME WHAT IT IS? WHEN CLUTCH IS PRESSED IT MAKES A SQEALING SOUND.I AM FINANCING THIS CAR,I PURCHASED IT +FEB 12,2010 .

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

From what you seem to imply, the release bearing is the culprit, if so the transmission will have to come out,sorry

Posted on May 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 dodge dakota 6CYL is stuck in gear,clutch pedal was hard to press ,now go the floor, when I crank it take


Sounds like the clutch slave cylinder has gone bad replace it. Then you should be fine. Good luck

Sep 25, 2015 | Dodge Cars & Trucks

1 Answer

1998 fxsc slowing down in any gear makes ascreaching sqealing sound . stops when you pull in the clutch


Hi Anonymous, I'm sorry but I just loaned my listening ears to the lead technician at your local Harley Dealer so he could take your bike for a test ride and evaluate the noise. Good luck and have a nice day.

Mar 12, 2013 | Cars & Trucks

1 Answer

Squealing when shifting into gear


You have a failed clutch throw out bearing

Mar 01, 2013 | Chevrolet Blazer Cars & Trucks

1 Answer

1996 nissan maxima clutch squeals pedal stuck to floor


Sound like you're going to need a whole new clutch assembly, but if the fluid level was dry you may have sucked air into the system which means that the clutch will have to be bled at the slave cylinder, just like you would brakes. The squealing sound is coming from the throw out bearing, usually when the do that it means that the bearing is frozen and cannot spin. Either way it looks like you'll be dropping the transmission to work on the clutch.

Jan 30, 2013 | 1996 Nissan Maxima

1 Answer

I own a 1995 Audi 90cs. My clutch peddle started being dead tell half way down then got preshure. Now there is no preshure and the peddle sticks to the floor. There was no slipping in the clutch so I


You need to replace the clutch slave.....Ii recently did mine, after the installation it was stuck too.......the way I fix it was I had a friend pumping the clutch by hand while I bleed it under the car, it took about 15-20 minutes before it got hard again.
Good luck!

Aug 01, 2012 | 1995 Audi 90

1 Answer

I need a diagram of how the clutch on a volkswagen golf works


Depending whether you have a 5spd or a 6spd, all the inner workings for mechanical will be the same except for the clutch slave cylinder. The slave for a 5spd is located outside by the bell housing while the 6spd is one unit together with the throw out bearing, so replacing that you'll need to remove the trans to get to it.

Apr 14, 2010 | 2001 Volkswagen Golf

2 Answers

2003 Tiburon GT 6spd won't go into gear occassionally


Take it to another mechanic,Also check to see if it may be covered by a recall

Jul 22, 2009 | 2003 Hyundai Tiburon

2 Answers

2003 Tiburon Gt 6spd won't go into gear


There is a "simple" slave cylinder modification for this car which helps with clutch issues. I performed it on my used 2003 Tiburon GT 6 speed and it helped quit a bit actually. Go to http://www.newtiburon.com and type "slave cylinder mod" in the search. You should be able to find a DIY there. I highly recommend you do this mod to your 2003-2005 tiburon if you're having clutch problems. Good luck!

Jul 22, 2009 | Hyundai Motor 1999 Tiburon

1 Answer

Scraping noise when off gas and clutch is out


either the throw out bearing has failed ot the clutch plate hub has failed
possibly from the clutch plate being installed incorrectly and the hub springs are hitting on the flywheel bolts

Jun 15, 2017 | 1999 Mazda MX-5 Miata

Not finding what you are looking for?
2004 Nissan Sentra Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...