Question about 2004 Chevrolet Cavalier

1 Answer

04 cavalier car stalls and wont rev over 2k trouble code po108

Car stalls and wont rev over 2k trouble code po108

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Http://www.hotrodlane.cc/New%20LS%20Links%20Page/LS%20trouble%20codes/DTC%20P0108.htm

I could be wrong, but I believe that's the code you are looking for. MAP Sensor [ manifold absolute pressure ]. I googled the engine code for a chevrolet so I hope that helps you.

Posted on May 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

04 Lincoln Ls engine codes p2104 p2112,wrench on dashboardso I drove it without problems went to Autozone to put computer scanner on car wrench came back on dash now can only drive 6 mph no go


Check coil #3 on v6 and #4 on v8. Usually the coil closet to passenger read side of engine. You probably dont feel a misfire, but put the car in drive and firmly hold brakes down. Rev to about 2k or 3k rmps. If it stutters thats your issue.

Nov 06, 2015 | Lincoln Cars & Trucks

1 Answer

Po108 repair


Faulty map sensor or vacuum hose leak going to map sensor or a short in the wiring to map sensor.

Feb 27, 2012 | Jeep Cherokee Cars & Trucks

1 Answer

I have an 04 that is starting to give me trouble. Last week I had a problem with no power above 2K rpms. I could hear the whin of the fule pump so changed the filters. Fixed the noise and power issue and...


Put a product called "Heet" in it to burn the water in the gas. The white smoke is usually a sign of water in the fuel. Also check your new fuel filter, there was a recall on Peruator brand filters. The problem was in how the connections were made for the fuel coupling.

Jan 21, 2011 | 2004 Ford F350

4 Answers

2001 Cavalier stalls when stopping randomly, could the crank sensor be the problem?


ok, I highly doupt it is a crank sensor problem. normally when a carnk sensor fails, the vehicle will stall and wont start back up for a long period of time. the firat thing that needs to be done, is to have the system scanned for trouble codes. thiswill tells us what might be going on. I suspect a problem with the idle air control module or a dirty throttle body. most parts stores will scan your vehicle for free. if you can get the system scanned for trouble codes, and let me know what code is in the system we should be able to help with this problem.

Jul 25, 2010 | 2001 Chevrolet Cavalier

1 Answer

89 z24 stalls instantly when shifting out of park


Your lockup torque converter is bad I believe. When you shift from Park into any gear it will die.

Sep 17, 2009 | 1989 Chevrolet Cavalier

2 Answers

Sometimes car drives eally well plenty boost other


Hi,you need to get the codes read first this will probably show an intermittent problem with the accelerator pedal position switch,if not check for air and vacumn leaks to all the actuators ,the fuel pumps are know for internal failure if you use bad fuel,

Aug 11, 2009 | 2001 Ford Focus

3 Answers

1989 Z24, 2.8v6 intermittent stalling while driving. Sometimes will restart, but not go far, sometimes will not restart at all. Usually starts fine the next day, may run OK several days before acting up...


the pcm may have a cracked board, i had an 88 cavalier z24 with the same problem, replced the ecu and it ran fine, the problem is that the boards inside the pcm crack and lose connection, the next time it acts up open the glove box and try tapping on the pcm, if the car responds at all, the pcm is bad

Jun 08, 2009 | 1989 Chevrolet Cavalier

2 Answers

Check engine light on and code po108


PO108 (map circuit high input) MAP is manifold absolute pressure... a sensor normally mounted on the intake. your code is suggesting a problem with this sensor, or its circuitry.

May 11, 2009 | 2003 Chrysler PT Cruiser

1 Answer

2004 cavalier stalled on highway wont start


DEFINITELY change the filter...It's only about ten times past its useful life. Then check fuel pump, pump relay and fuse. (doubt if you'll have to!!)

Mar 17, 2009 | 2004 Chevrolet Cavalier

Not finding what you are looking for?
2004 Chevrolet Cavalier Logo

Related Topics:

466 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...