Question about 2001 Hyundai XG300

2 Answers

-2001 hyndai bucks and shifts from 5th to 3rd on the transmission, I have to stop and turn engine off the restart engine to reset to continue

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

I have a 2001 xg-300 to same problem there's two speed sensor on the transmission (outpout and input) there's your problem i had the same problem change both of them (expensive but it's worthed)Remove the batery and the batery suport they are both there on the top of the transmission...they cost the same price around 221$ each, here at hyundai dealer in Québec please reply...thanks! Patrick!!....

Posted on May 11, 2010

  • rgnestle Sep 19, 2010

    To make sure I'm not advertising I won't say where to find these parts, but if you search the Net, you can often find parts with deep discounts, but good warranties. I have found many parts at a third of their retail price by comparison shopping on-line. Best wishes to you.

×

I would take it to a trans repair shop or dealer,if money is no object. Stop driving it ,before any damage happens ,internally to the trans.

Posted on May 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bmw technical problems


There will be error codes but the CPU is not being accessed correctly for the readings. The problem will most likely be in the TCM

Jan 06, 2014 | Cars & Trucks

1 Answer

92 chevy s10 4x4 4.3L manual transmission no 3rd gear


Hi:

Your transmission has 3 shift rails...
1st - 2nd
3rd -4th
5th- Reverse

If your 3rd gear doesn't work , you have an internal transmission problem, such as a syncronizer, or similar fail... There is not much you can fix, without removeing the transmission.

Nov 30, 2009 | 1992 Chevrolet S-10

1 Answer

My Hyundai xg300 downshifts from 5th gear into 3rd gear. We have changed the mass air flow sensor and some other sensor that is attached to the transmission. We never wash the engine so it's not water on...


Yeah... why did you change the MAF?... Someone tell you the MAF caused your transmission to shift from 5th to 3rd?... I don't think so!
Did the 'Check Engine' Light come ON? Whenever the 'CHECK ENGINE' light comes on, the ECU (Engine Control Unit) sets a Diagnostic Trouble Code (DTC). These codes identify the particular engine management system which caused the light to come on. You'll need to use/find an OBDII (On-Board Diagnostic) Scanner to retrieve any code which have been stored in the ECU computer. Afterward, we might be able to help you DIAGNOSE and perhaps eventually fix the problem.

Aug 01, 2009 | 2001 Hyundai XG300

1 Answer

Transmission shifting on 2001 Ford Ranger


That sound means the transmission fluid is dirty. Go to a shop and get a BG Power Flush.

Jan 02, 2009 | 1991 Ford Ranger Supercab

1 Answer

Transmission is "Hunting"


there are so many sensors nowdays that cause the same problem.---a bad throttle position sensor causes,:transmission shift issues,bucking, jerking, idle surging, engine cut off,hesitation on take off, surge while cruising down highway. a code will not allways set for a problem.

Oct 28, 2008 | 2001 Chevrolet Malibu

1 Answer

Transmission on my 2001 Hyundai Elantra GLS


your shifts correctly, as your driving it downshifts and stay stuck at that gear when u stop and try to take off but intell u turn off your car and restart it it shifts correctly intell a few mins later. i am thinking that is a speed sensor (out signal problem) mounted on top of your transmission next to the battery tray, you will see couple of cable linkages next to it ...

Sep 22, 2008 | 2001 Hyundai Elantra

Not finding what you are looking for?
2001 Hyundai XG300 Logo

438 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...