Question about 1986 Mercury Marquis

Open Question

Location of freeze plugs on a 1988 grnd marquis

Posted by on

  • Greg Bernett
    Greg Bernett May 11, 2010

    No problem! But the question we have for you is....what size of motor do you have???



Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the fuel pump located in a Mercury Grand Marquis 1988, engine or fuel tank?

All vehicles that have fuel injection,that would
be, most vehicles from 1985 on,the fuel pump
is in the gas tank.

Feb 10, 2011 | 1988 Mercury Grand Marquis

2 Answers

95 merc grnd marq. engine suddenly stopped running. turns over but no spark. connected 2 scanners to data port but port reads error. what's my next move?

I would check the computer fuse and relay. I would also have the control module tested, usually Auto Zone can test them. I would check and make sure you are getting gas at test port on the fuel rail.

Nov 05, 2010 | 1995 Mercury Grand Marquis

1 Answer

I am trying to find out which spark plug is the #1 plug in order to hook up a timing gun to a 1988 mercury grand marquis.

either no 1 or no 6 will do ,try front left first then front right bank and see if the mark is anywhere near ,set to 6? for unleaded fuel

Sep 03, 2010 | 1988 Mercury Grand Marquis

1 Answer

1988 Mercury Grand Marquis vaccum problem

what is the issue?

Check the vacuum harness on the back of the heater control head to see if it's leaking or not tight.

Jul 23, 2010 | 1988 Mercury Grand Marquis

1 Answer

Where are freeze plug located. have leak by transmission.

frost plugs are located in the block and the heads at both ends and along the side on the block, they can involve a lot of disassembly to replace, like removal of manifolds or transmission, not much fun

May 28, 2010 | 1996 Mercury Grand Marquis

1 Answer

Change thermostat 1998 grand marquis

Locate the water hose at the top of the radiator and follow it to the top of the engine block. There you will find the thermostat housing. Remove the two bolts and remove the housing. Pay attention as to how the thermostat is sitting in the housing. Lift it out and put in the new thermostat the same way. Make sure you replace the thermostat housing gasket. Reassemble the housing and add anti-freeze until full.

Apr 11, 2010 | 1988 Mercury Grand Marquis

1 Answer

Where and how do you change freeze plugs in an 1988 ford crown victoria

theyre located on the sides of the block, about the size of a silver dollar, pop the old ones out with a screw driver, install new with a soft rubber malet. drain eng. coolant first though as you will leak antifreeze once plugs are removed

Apr 05, 2010 | 1988 Ford Crown Victoria

2 Answers

My 1988 mercury grand marquis just about stalls when you put it into park after driving it for a short while when the oil is still cold.

my 1988 merq grand marquis GS shuts off while parked or driving every so often. however is able to crank right back up. ive chaged the fuel filteron the under side body of the car, plugs and next step is to drop the tank and check for trash. what should i do or is there something else to look in to also.....

Sep 30, 2009 | 1988 Mercury Grand Marquis

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts


Level 3 Expert

77186 Answers


Level 3 Expert

5575 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides