Question about 2003 Cadillac Seville

Open Question

2003 Cadillac Seville STS , The Service Stability message came on my message center als the ABS light and the TC light cams on. I stoped the car turned off iginiton then a minute or so later started it again. about 20 minutes later it came on a gain. I did the sane thing and it never came on i got home. What I found oput so far ithat the Sterring Wheel Position Sencor can cause this . what eles would cause this?

Posted by on

  • gwgsr May 11, 2010

    Tere are many posibilities, need failure code to help, most national parts stores have equipment to read codes

  • HD1100 Jul 26, 2011

    one ot he two wires that plug into the wheel bearing coul be bad. This happend to me after i replaced a wheel bearing the CV boot cover wore through the outer lining and one of the wires. But short of taking the Wheel Bearng of ,see if u can get a hold of a wheel bearing that u Know is good u can just un plug one of the bearings and plug that one in if the service and TC and ABS go out then this means that is the bearing. But the Service has to be staying all the time as well as the TC and ABS. If afert turning the car off then turning it back on resets the Service , TC and ABS this wouldn't work. It has to be on as soon as u start the car or in the on position.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 135 Answers

SOURCE: b 1998 cadilac seville sts, battery shows good

check fuses

Posted on May 19, 2009

  • 41 Answers

SOURCE: replace power steering pump and lines 1992 cadillac seville sts

you need to have a pulley puller to get the pulley off if you don't have one most auto zone part stores have a loan a tool program and they can help you with that on most powersteering pumps the high pressure line will be a fitting or bolt on and the return line is usually just a squeeze clamp hope this helps good luck

Posted on Jan 30, 2009

  • 5 Answers

SOURCE: 1998 cadillac seville STS

on my 1998 Deville its located in the trunk. the panel thats is butted up to the back of the rear seat. look for some black nuts around the top of rim of the trunk, they are about 1'' long, these have to be removed first... good luck.....

Mac.........

Posted on Mar 10, 2009

  • 50 Answers

SOURCE: wheres the thermostat located 94caddy seville sts

4.6L lower rad hose 4.9L upper rad hose trace it out youll find it

Posted on May 31, 2009

messstat
  • 365 Answers

SOURCE: 1998 cadillac seville sts air ride prob

Disconnect the - battery terminal for a minute and reconnect.
Good Luck

Posted on Jun 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2006 Cadillac STS is braking by itself with all these lights on..stabilize stability system brake assist..etc what is going on could someone help


problem usually narrows down to abs system problem or hub failing causing problem with abs --have vehicle scanned for the trouble code it will assist you as where to start in repairing problem most auto stores offer this service for free --in the mean time pull the abs fuse so brakes can revert to a normal non abs system till repairs can be made

Jun 04, 2017 | Cadillac Cars & Trucks

2 Answers

Why does my ABS light stays on and sometimes i get a vibration in the brake petal causing my 2002 Cadillac escalade not wanting to stop?


Sounds like a fault with the Antilock Braking System. The vibration in the pedal is the ABS working. With your foot on the brake pedal, it releases and re-applies the brakes to stop a skid from the wheels locking up. You need professional service for brakes.

Seems to be a known issue on all Cadillac and requires the ABS module to be replaced.

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > DeVille Cadillac DeVille ABS Light Due to ABS Control Module Failure. This is a verified problem based on 126 reports. Learn more about this problem, when it occurs ...

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > Seville STS Traction control and ABS lights stay on dash. This is due to ecbtm Module gone bad. replace Module and this should fix the problem. You can go by the VIN and ...

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > DeVille DTS ABS Light Due to Control Module Failure on Cadillac DeVille DTS. The anti-lock ... ABS and Traction control light stays on. ... abs light to abs control stay on.

ABS Light Due to ABS Control Module Failure : Cadillac ...

repairpal.com > Problems > Cadillac > Seville SLS ABS Light Due to Control Module Failure on Cadillac Seville SLS. The anti-lock brake ... SLS135,000Jumsee. Abs and traction lights stay on when started.

Jan 12, 2016 | Cadillac Cars & Trucks

1 Answer

The service stability system light came on my Cadilac Seville STS 1999


Have it serviced and the mechanic will reset the switch

May 08, 2014 | 1999 Cadillac Seville

1 Answer

How too get service air bag light off 2003 seville sts


Hello, To get this light to go out and stay out you are going to have codes read by a scanner, when you get the code you will have to diagnose the system and repair /replace the component that is causing the problem. hope this will help you.

Sep 06, 2010 | 2003 Cadillac Sts

2 Answers

Traction control won't disengage.


You can pull the fuse for now. The traction control pump could be faulty or the wheel sensors are dirty and need to be cleaned with brake parts cleaner

Jan 18, 2010 | 2006 Cadillac STS

1 Answer

I have a 97 STS. I just changed the rear brakes -


i have similar problem on my 97 SLS only current codes are TCS C 1235 and MSM B2120

Aug 02, 2009 | 1997 Cadillac Seville

1 Answer

1998 cadillac seville battery light flickers at traffic signals


Sounds like your belt to the generator or alternator is slipping on acceleration.Turn off eng an ck tension by moving belt up and down at point between alt and pully. should not move more than 1 inch. The other lites may be due to low battery level.

May 14, 2017 | 1998 Cadillac Seville

2 Answers

Abs light/traction control light


You can check out what the trouble code is by pushing and holding the information button and the up arrow (right side of instrument cluster above the radio) until all the instrument clusters light. Press the information button (last) to enter test mode. I've had an error C1234, meaning Left rear wheel sensor fault. I found the problem to be a corroded connector under the chasis just under the rear left door about 2 feet in. I had to by-pass (replace 1 wire due to corrosion at the connector.

Mar 18, 2009 | 2001 Cadillac Seville

1 Answer

2003 Cadillac Seville Key Fob


At the dealership with a computer.

Mar 11, 2009 | 2003 Cadillac Sts

Not finding what you are looking for?
2003 Cadillac Seville Logo

Related Topics:

296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...