Question about 2005 Chrysler Town & Country

1 Answer

2005 Chrysler town and country abs light on, but no trouble codes showing. car brakes seem to be fine.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

We own a 2005 Chrysler Pacifica (3.8 litre) and currently have the same problem. This has happened at least 2 other times on our vehicle. Our trouble code was for a faulty ABS wheel sensor, and after searching the internet I found A LOT of other Pacifica owners had the same problem. The first time this happened to us, it was covered under the Chrysler warranty. The second time, it cost about $275 to repair. This is something that only a Chrysler / Dodge dealer can diagnose and repair. At first, we went to Firestone and they preceded to replace the brake pads, rotors, flushed the master cylinder and nothing they did seemed to work. Finally, I went to the Chrysler dealer and they immediately diagnosed the problem and fixed it. I am not sure if the computer will actually report a trouble code for the ABS problem or not. I will warn you that even though the brakes seem fine, eventually they WILL fail on you and you will have SIGNIFICANTLY reduced stopping power. Our light went on while we were down the interstate at 70 mph, and let me tell you that was a very scary situation with me, wife and two kids with NO CONTROL over how fast we could stop. Take your vehicle to the dealer and get fixed, it's not worth risking an accident. Good luck!

Posted on Dec 21, 2010

  • toddarms2002
    toddarms2002 May 06, 2012

    My ABS light was on when i purchaced my 2005 T and C. The power wire under the fuse box (next to the battery) was corroded and broken off!!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code 4029 on my ABS code scanner?


Check the air gaps on the abs ring to sensor.

Aug 07, 2016 | 2003 Chrysler Town & Country

1 Answer

2005 Chrysler Sebring Brake and ABS lights are on, car beeps when I start it


Someone will need to scan the body computer for trouble codes to proceed. The ABS system uses the regular hydraulic brakes to function.

Jan 31, 2013 | 2005 Chrysler Pacifica

1 Answer

My abs, brake, esp/bas, and esp/tcs lights all came on at once. Every time I start the car they are off and about thirty seconds into motion they all come on. Brakes seem to be functioning fine. ...


Most likely ou have speed sensor that Is not giving the correct info. At startup the abs does a self check and since the light stays off until you drive it there is no issue with the systems integrity. The light comes on after you start to move because the system is not seeing the info it should be seeing. Your best course of action is to have the abs system scanned for trouble codes. This will help narrow the possibilities. Once you have the codes post them here.

Jun 06, 2012 | 2008 Chrysler Town & Country

1 Answer

Abs light on


go to parts store & check codes. sometimes they do it for free that will tell you if theres is a wheel speed sensor bad. also check all the brake lights some vehicles will disable the abs if there is an open circuit (bad light bulb)

May 17, 2012 | 2005 Chrysler Town & Country

1 Answer

Hi...i have a 2005 chrysler town & country sto & go LX 3.3L V-6 mini van....for some reason the brakes r acting up....sometimes they work sometimes the pedal goes all the way to the floor....master...


its sounds like it could be a bad master cylinder with an internal leak.it could also be a problem with the abs hydraulic module that for some reason is bypassing brake fluid within the unit itself.these problems won`t neccessarily turn on the dash light or activate the abs light.

Apr 21, 2011 | 2005 Chrysler Town & Country

2 Answers

I got the ABS Light on my 2005 Chrysler Town and


Stop at a Tuffy or other shop and they can scan for codes to tell you which sensor may be faulty. Wheel sensors are easy to replace.

Apr 09, 2010 | 2005 Chrysler Town & Country

1 Answer

Chrysler trouble code U110C on 2005 chrysler town


encrypted software ,dealer only----yes i know you are showing a reading but it doesnt mean anything or if it does it shows a different code .so your snap on or mac tools scanner is a waste of time and money.Nearly all new motors from 2005 are using encrypted software to stop general mechanics like me from working

Sep 12, 2009 | 2009 Chrysler Town and Country

1 Answer

Brake and abs lights and engine light on


have to pull the codes on each system to find problem but the other shop should look at it again if they just worked on it

Mar 25, 2009 | 2003 Chrysler Town & Country

Not finding what you are looking for?
2005 Chrysler Town & Country Logo

2,115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...