Question about 1996 GMC Sierra

1 Answer

No turn signals

I was trying to hook up a break controller to the plug and i pulled all the wires out of the back and now i have no turn signals

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 474 Answers

I would start by checking the fuses and if they are blown replace fuse.If it keeps blowing the fuse I would check your conections to make sure they are correct and not shorting out to ground.

Posted on May 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Dodge Ram 2003, and I'm trying to pull a trailor (hook it up with light, signals, etc) and i get breaks and a letf turn signal but no right one, can you help me?


if the right signal is working on the truck then check at the trailer plug to make sure the plug is working. if not then check the wiring for the right signal from the plug back to where it connects to the truck wiring you may have a bad wire. if this is good then connect to the trailer and check for power on the wire for the right signal at the socket. if this is good then replace the bulb. if not then you will have check the wiring for it from the socket back to the plug for a damaged wire.

May 01, 2014 | 1999 Dodge Caravan

1 Answer

I purchased an 81 eaton 24ft camper and I just had break controller and seven point hook up installed in my truck I hooked the truck up to he camper and get break lights an turn signals but none of the...


First thing to check is make sure the 7-way is plugged in firmly. Many times after connecting some people might accidentally trip or pull on the electrical connection. Next would be to get a test light and with your vehicle lights on start checking each of the 7 contacts in the 7-way right off the rear of your truck to make sure your 7-way was installed/wired correctly. If you still have the package for the 7-way that you installed it should show a diagram illustrating what contact is for the running lights and tail lights. If your test light pops on for each of those contacts then you have either bad bulbs or bad wiring on the trailer.

Dec 11, 2013 | Cars & Trucks

1 Answer

Brake lights and turn signals not working


on gms the brakes are hot always to fuse from it to brake switch from it to turn/hazard switch if both brake and turn dont work replace turn signal switch and it is hard to do ,remove bottom steering cover then top cover you need special inverted touqix socket to remove top and regular touqix bit for bottom lower cover must be removed two screws hold switch on one on top other turn wheel and you will see at bottom on front of switch . follow wires to big plug under dash loosen bolt in center pull plug apart section for turn switch slides in remove then replace on column wires may be hooked fight loose and pull up through along top and out with wires push new down down same spot and replace every thing takes me about 1 to 1/2 hours to do some times less.

Aug 04, 2012 | GMC Cars & Trucks

3 Answers

Just bought second hand 98 chevy lumina and someone stopped me saying I have no brake lights, so I checked and I only see a place for backup lights and turn signal lights. Why do I not have any break...


The brake light in the rear window and the main brake lights are on a different circuit. After the signal leaves the activating switch on the brake pedal arm, it splits. One circuit goes straight to the high mount brake light, the other goes into the turn signal switch. If the rear turn signals work but the brake lights don't, suspect the turn signal switch, not the bulbs and wires. Better to check this before removing and checking bulbs, wires and fuses. It is a common problem with the W-body cars like Lumina, Monte Carlo, Buick Regal, Olds Cutlass and Pontiac Grand Prix. (Approx 94-99 models). Part number is GM 190005031 (w/o radio accessory control) or 19005032 (with radio controls)

Nov 21, 2009 | 1998 Chevrolet Lumina

2 Answers

Headlights stopped working, not a fuse, and turn signals dont work but emergency flashers do.


hi, if the turn signal is on the same stick as the lights then you need to look at replacing the control if they are seperate then you need to locate the wires and unplug them then plug them back in this may solve your problem, if not it would be a case of testing each wire for power and locating where the break in the wire is

Nov 17, 2009 | 1993 Chevrolet Cavalier

1 Answer

When I hook up to a trailer, the left turn signal and the left brake light won't work. I have tried several trailers with the same results. I own a 2003 gmc 3/4 ton pickup. I have two places to connect the...


it sounds like either the wires controling the left brake light and turn signal are borken or loose on your truck. or there could be a problem with the ground for the trailer hookup. you should take a volt meter and then have someone put the brake on and test at the hook on the truck side to see if you are getting any voltage there and do the same thing with the turn signal. if you do not have any voltage there you need to trace the wires back up into the truck to find where you do have voltage . you may find a broken wire as you go. How many wires are there in your trailer hook up?

Sep 22, 2009 | 2000 GMC Sierra

1 Answer

I have a b 2200 mazda pick up. i recently put on a 7 prong plug to pull a small boat trailor and when hooking up wires i have a seperate brake wire and dont know were it goes. i tried to hook it to the...


the wire you maybe talking about could posibly be for the trailer brake controller, which you have to buy serperate i'm not to sure how much it will run you but i would look into that because that is what the extra wire is usually forwith the 7 prong trailer plugs

May 11, 2009 | Mazda B2200 Cars & Trucks

1 Answer

Trailer break lights and running lights don't work


i would use a multimeter to read each wires operation voltage before hooking up. ex. turn on turn signal, connect meter to find which wires is pulsing.

So your saying you wired the trailer yourself? yes you need the wires to both sides for brake and running. the runners have to be all connected, and the brake all connected, hot and neutral.

Mar 17, 2009 | 2002 Oldsmobile Alero

3 Answers

Trailer wiring for 06 GMC Canyon 4x4


exactly what does it do? please explain what happens when you press the brake turn on the light than brake signals ect.....

Aug 13, 2008 | 2006 GMC Canyon

Not finding what you are looking for?
1996 GMC Sierra Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...