Question about 1997 Chrysler Concorde

2 Answers

Right turn signal does not work bulb and fuse is good

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Tighten the cables on the positive side of the battery.

Posted on Jul 23, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 474 Answers

Check the socket for corrosion or the back of it for melted wires.You may also want to check the bulb at the other end of the car to make sure it is not blown since they work together on th same circut.

Posted on May 09, 2010

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

canbruce75
  • 1776 Answers

SOURCE: turn signals are not working at all, all bulbs are

This sounds like the flasher unit is defective. They are usually located adjacent to the steering column up under the dash. They can be purchased at any auto parts store and simply unplug the old one and plug in a new one. It could be the turn signal switch, but the most likely culprit is the flasher unit. Good luck and I hope this helps you out.

Posted on Jul 07, 2009

  • 363 Answers

SOURCE: Rear turn signals don't work even with new bulbs and good fuse.

Are you electrically inclined, if so you need to test the circuit starting with the bulb sockets

Posted on Jul 23, 2009

  • 396 Answers

SOURCE: My rear right turn signal

no that light wouldnt have nothing to do with it. did you take the bulb out and visually inspect it?? or just go by the brake light working?? either bulb is bad, or short in the wire going to the socket

Posted on Nov 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

69 turn signal problem left turn signal not working. right turn signal causes both to falsh


it's the grounds if they're both flashing fast it's definitely grounds take a test light and see if its got power goes through the test light grounded to the frame and if the light comes on then it's definitely your grounds

Jul 29, 2014 | 1969 Pontiac Firebird

1 Answer

How do i replace the fuse for the front turn signal on 2006 cadillac srx


The socket is defective?? Probe the socket with a volt meter to see if voltage is turning on and off to trigger the bulb to flash.

Jul 09, 2012 | 2006 Cadillac SRX

1 Answer

My right front turn signal wont work, the dash board light came on telling me i need a new bulb i put one in and it still does'nt work . I checkd all fuses and they are good , me right rear turn l


are you sure that you put the right bulb in? Some of these bulbs look very similar, (like a 3057 and 3157 or 3156) but they are different. A customer came in with this problem and the problem was that they put a bulb with a single filament in when it was supposed to have a dual filament. the bulbs looked the same and they just grabbed them off the shelf instead of asking the parts guy what their vehicle called for.

May 27, 2012 | Cars & Trucks

3 Answers

Both my right & left turn signals aren't working but hazards are


If you can locate the hazrd flasher unit under the dash on the drivers side, the turn flasher unit should be right beside it and looks the same. Unplug and switch the 2 flashers and see if the turn signals work. The flasher unit is a silver and round. they are usually close to the stering colum. Let me know if that helps.

Mar 27, 2011 | Dodge Durango Cars & Trucks

1 Answer

Signal lights, fuse box and signal light relay in 2001 Volkswagen


The bulbs on these cars can be delicate. Some get replaced every year or so-( headlights, tail and brake) and some I've never touched in 8 years (my front turn signals and marker lights)

The fast blinking occurance is normal when a turn signal bulb goes out.

The rear lights are common to blow, I keep spares in the glovebox.

Make sure you were given the correct bulb, check to see that it works and isn't defective. Also there is an empty spot in the rear bulb holder- make sure you didn't mistakenly pop a bulb in there cause' it won't work.

The front right signal light is in the right headlight housing. Open the hood and on the back of the housing there are two plastic caps. One is curved and one is rectangular- you want to take off the rectangular one.

Open the drivers door and on the side of the dash there's a cover. This is the main fuse block. Use a coin or carefully with a screwdriver pry it open. To check a fuse pull it out, noting exactly where it came from, and visually inspect it to see if it is blown.

Fuse # 2- turn signal system
Fuse #4- License plate lights
Fuse #7- back up lights
Fuse #13- brake lights
Fuse #22- parking and side marker lights, right
Fuse #23- parking and side marker lights, left

The turn signal flasher is integrated into the hazzard button in the center of the dash. If all else is good and you suspect the flasher is bad, which is a good possibility, call a VW dealer and have them run your VIN# to check for recalls. The hazzard switch for some cars around your year had a recall on em'.





Jan 01, 2010 | 2001 Volkswagen Jetta TDI

1 Answer

Turning signals not working


The way the system works is:
The fuse supplies 12 volts to the flasher unit then leaves the flasher and goes to the turn-signal switch in the steering column.
When you set the turn-signal switch to turn right or left, the switch sends that 12 volts to the front and rear bulbs. The voltage goes through the bulb, lighting the bulb and goes to ground.
If any of these components are not good than the lights will not work.
Check the fuse and make sure it is good, the fuse will be located under the hood at the fuse center.
Let me know if you have a test light and we can proceed from there.
Regards,

May 09, 2009 | 2001 Chevrolet Blazer

1 Answer

Right side turn signals don't work.


if bulbs okay check fuse is good you got faulty turn switch or bad ground.

May 09, 2009 | 1998 Mercury Mountaineer

2 Answers

1993 Dodge Shadow...left turn signal won't flash


If the fuses are good and the front and rear bulbs are good, change the flasher for the turn signals, even tho the right is working. If that doesn't fix the problem, it might be in the turn sgnal switch on the steering column.
If both bulbs are good for the backup lights and fuses are good, then the backup light switch, which is screwed into the side of the transmission has to bad.

Apr 12, 2009 | 1993 Dodge Shadow

Not finding what you are looking for?
1997 Chrysler Concorde Logo

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...