Question about Honda Odyssey

1 Answer

The security alarm has gone off at the same time ( 1 AM!!) the past two nights. It immediately stops after hitting lock on remote but then goes off again 1/2 hr later. My neighbors are now not talking to me and i am sleep deprived and need a solution fast!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! First option, You will need to disconnect the battery connectors and let it sit for atleast 30mins., this should reset the system on the anti theft. Second option, I would suspect a faulty anti theft system and this will need replacement. For the meantime disconnect the battery connectors so the neighbors wont be disturbed. Hope this helps and have a good one!

Posted on May 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No dash, radio or door activated interior lights. Checked fuses already


Dash lights (Gone?) - FSB Forums - FullSizeBronco.com

www.fullsizebronco.com/forum/21.../198643-dash-lights-gone.html
Sep 7, 2011 - Fully rotating the shaft counterclockwise past a notch activates theinterior lights within the vehicles. ... No aftermarket stereo, the dash lights stopped working, and my taillights ... 8 15 Courtesy/Dome/Cargo Lamps, Electric Outside Mirrors, ... 12 20 C.B. Power Door Locks, Electronic Shift Motor 4WD, Power ...

Radio died, remote system not working, door locks will not work ...

www.topix.com > Chrysler Sebring
Aug 13, 2008 - So what all is not working at this time is: Door locks (with remote it only ... My lights on the dash dim some times and if I hit a bump the radio goes off, ... All the fuses are good, but still no power to the radio, interior lights, push ...

2009 Chrysler Town and Country No Dash instrument cluster lights ...

forum.chryslerminivan.net/.../55281-2009-Chrysler-Town-and-Country-...

Jan 13, 2014 - 10 posts - ‎5 authors

Dec 21, 2015 | Cars & Trucks

Tip

How to set & cancel theft deterrent system or how to set & cancel security...


Theft deterrent system (on some models)

Theft deterrent system is designed to deter vehicle theft. The system flashes the turn signal lights and turns on the interior light or the signal lights only (depending on the model), and sounds security horn and vehicle horn when it detects abnormalities such as follows:

• Any door or hood is forcibly opened.
• The batter terminal is disconnected and then reconnected
• The system control is disconnected and then reconnected.
• Abnormal impact is detected when the impact sensor function is on.

The system flashes the turn signal lights and turns the interior light or the signal lights only (depending on the model), and sounds security horn and vehicle horn if someone attempts to damage or break into your car.

Setting the system

You can set the system with or without the impact sensor function. For details, see "Canceling the impact sensor" below.

1. Turn the ignition key to "LOCK" and remove it.
2. Have all passengers get out of the vehicle
3. Push the lock (set) switch on the wireless remote control key once. At this time, the turn signal lights flashes once and the security indicator light comes on.

The system is set after 30 seconds. At this time, the security indicator light start flashing slowly.

Once the system is set, you cannot start the engine until you cancel the system.

The system will not be set in the following cases.

• When any of the door is open; security horn sounds for 1 second, close the door and set the system again.
• When the hood is open; close the hood securely.

Canceling the Impact Sensor

The impact sensor can be cancelled to prevent false alarms from being triggered incase of the following conditions:

• When parked in the noisy area
• The vehicle body or glass is subjected to a strong impact from the (such as in highly pressurized car wash).
• When transporting by a car carrier or ferry.

To cancel the impact sensor;

1. Lock the door by pushing the lock (set) switch on the wireless remote control key once, and turn signal light flash once
2. Then push the lock (set) switch twice within 5 seconds. At this time, the turn signal flash 5 times to indicate the impact sensor function is disable.

The impact sensor is deactivated as long as the system remained armed.

Canceling the system

The system will be cancelled by the following two ways:

• Turn the ignition key from "LOCK" to "ON" position.
• Unlock any of the doors by pushing the unlock (cancel) switch

If the turn signal lights flash 3 times, the system has been alarmed. Check to see if there is any abnormality with your vehicle.

If any of the doors is not opened within 30 seconds, all doors will be automatically locked and the system will be set.

When the system is set

Activating the system; When the system detects abnormalities such as follows, it flashes the turn signal lights and turns on the interior light or the turn lights only (depending on the model) and sounds the security horn and vehicle horn of 30 seconds.

• Unlocking any door without using wireless control
• Any door or hood is forcibly opened.
• The battery terminal is disconnected and then reconnected.
• The system control assembly is disconnected and then reconnected
• Abnormal impact is detected when the impact sensor function is on.

Reactivating the alarm;

Once set, the system automatically resets the alarm after the alarm stops.

The alarm will activate again under the same circumstances described in "Activating the system".

Stopping the Alarm

The alarm will be stopped by the following two ways;

• Turn the ignition key from the "LOCK" to "ON" position.
• Unlock any of the doors by pushing the unlock (cancel) switch.

The system can be cancelled by these ways at the same time.

If the battery becomes discharged due to the vehicle being unused, for a long time etc., when the battery is recharged or replaced, the system will activate the alarm. If this happens, immediately unlock any of the doors by pushing the unlock (cancel) switch, and the alarm will stop.

Testing the system

1. Set the system
2. Insert a wireless remote control key into the key hole on the driver's door handle, and unlock the door.
3. Open the door, and an alarm will sound.
4. Stop the alarm by pushing the unlock (cancel) switch.
5. Repeat this operation for the front passenger's door.

Good luck.

on Nov 08, 2010 | Toyota Pickup Cars & Trucks

1 Answer

Keyless remote


hi Alan

what procedure you are doing for remote matching?
try this one and let me know.

1 Unlock the car, get in and close the door

2 Switch ignition on

3 Press the door lock button on the dash to lock the car

4 Press and hold the door lock button on the dash, the alarm will beep

5 Keep holding the door lock button on the dash, press and hold the lock on the remote,

the alarm will beep

Repeat (5) for the other remotes,

6 leave the door lock button on the dash, the alarm will beep, switch ignition off

Feb 13, 2014 | Suzuki Cars & Trucks

1 Answer

How do you remove/disable a 1998 altima factory alarm?


You can't, it is an integral part of the electronic engine control system

Sep 27, 2012 | 1998 Nissan Altima

1 Answer

I changed the battery in my 2005 Kia Optima and the door locks stopped working. When I hit the lock button in the car, it immediately unlocks. Is there something that has to be done to reset them?


its a kia and everything goes funny on these cars with electrics ,your lucky the alarm hasnt come on as well ,on these kias their is a diagnostic socket under the bonnet as well as the OBDII and on our europeon models the OBDII doesnt work ,yes it has one but its not wired up ?? anyway try locking and unlocking the doors 3 times slowly with the key ,leave it locked and then try the remote

May 25, 2011 | Kia Optima Cars & Trucks

2 Answers

2002 VW Cabrio alarm problem: alarm will not un-set. Door will not lock using the key OR the remote. Hitting "alarm off" button on remote, it unsets, then arms again immediately. With engine...


i have a 2002 vw cabrio and won't start after i took out the battery everbody is telling me that anti-theft is lock mode how do i rest it so i can start my car

Nov 08, 2010 | 2000 Volkswagen Cabrio

1 Answer

Car alarm doesnt really work the alarm light isnt blinking and it doesnt go off if i open a door or hit it


try this..sit in the car and lock it with the remote.wait about 1min then try opening doors.without using keys or remote, if it goes off its working.dont worry too much about dash light if the led has gone. leave it alone...

Mar 03, 2010 | 2002 Nissan Maxima

2 Answers

ALARM GOES OFF AT NIGHT


paul , your alarm is working fine .the only reason it gose off is be cause some might be messing with you or may be anmal is setting it off. if the alarm was messet up you would not be able to start your jeep. and you would have to haul it in to the dealer to get it fix.

Jun 05, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Panic button


the alarm may be in "stolen" mode already. what you can do is that you can switch the key into ON position and open the hood, remove the negative terminal from the battery and reconnect after two minutes. this will give the alarm time to reboot and recognized that you have the key to this vehicle.

Aug 14, 2008 | 2000 Toyota Sienna

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...