Question about 1993 Honda Prelude

1 Answer

Having trouble installing leads from distributor to motor{sparks} and timing is out on honda prlude 93 h23a1

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

Check to make shore that the cambelt has not jumped a tooth or 2.and check to make shore that the spark lead's are in correct place's so that the firing order is correct.

Posted on Sep 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

93 Honda Civic DX not getting any spark


its most likely the distribuator igniter

Jan 15, 2013 | 1995 Honda Civic

1 Answer

Im just trying to find the idle air control valve


it's on the in take plenum underneath the runners u should be able to see it from the top of the motor . Also check coolant level if the rpms fluctuate due to the coolant temp sensor not submerged in coolant.

Oct 20, 2009 | 1993 Honda Prelude

1 Answer

93 Honda Accord has No spark, timing belt is ok. Put a couple used coils, one ran for five minutes a quit. Second one didn't work at all.


change your distributor the problem is your camshaft position sensor
than is part of the distributor and check all fuses.
I seen this many times.

Good luck :)

Jun 17, 2009 | 1993 Honda Civic 4 Door

1 Answer

When I give my car full throttle in first it struggles to go.


check/change spark plugs and HT leads including king Lead. Also check, change Distributor Cap and rotor. spray WD40 on all connections etc and inside Distributor cap as moisture is a very common cause of missing in old honda motors. Don't clean the motor with water. cheers

Mar 31, 2009 | 1991 Honda Accord

1 Answer

84 prlude


most likely battery voltage is to low when cranking over.
try a better battery

Jul 28, 2008 | 1984 Honda Prelude

1 Answer

Answer


distributor ill tel you

you start the car it winds power from the battery to starter motor
then power to coil that powers the distributor that rotates and creates spark to the leads

so could be your coil
distributor
or distributor module

Jul 11, 2008 | 1993 Mazda Protege

1 Answer

93 chevy s10 4.3L V.I.N z


Hello I would think if you replaced all those components, It would lead me to say its the ignition module, Or Pickup coil, they are both located under the distributor Cap. Fairly Easy to change should take about 15 to 30 minutes depending on you mechanical ability. I sure hope that Helps you out. If not get back and we can do somemore trouble shooting, For spark,fuel pressure. Ect.. Thanks Hopefully that will get you going.

Jun 12, 2008 | 1993 Chevrolet S-10 Blazer

Not finding what you are looking for?

Open Questions:

See all 1993 Honda Prelude Questions

1993 Honda Prelude Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...