Question about 2006 Dodge Ram 3500 Truck

1 Answer

How do you remove the tail light on a 2006 dodge ram. I removed the two screws by the tail gate but I'm afraid of pulling too hard to take it off the truck. It fells as if there is another screw on the opposite side from the two screws.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 37 Answers

Theres a couple plastic push pin type retainers on the opposite side
of the fastners and yes it can feel like its going to break something pulling them out. I use a plastic trim type tool to pry it out in order not to damage the paint/tail lamp assembly.

Posted on May 22, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change a rear turn signal lamp on a 2005 dodge caravan


I am including a couple of illustrations to better help with this replacement.
You will first need toe open the tail gate. then next to the tail light on the inside edge where the tail gate meets the seal you will see to plastic screw covers ( if still there) or two screws. You will need to remove these two screws , once removed the tail light will come out by lightly pulling outwards. Then simply depress the thumb clip on the bulb holder and remove.
9697c49.jpg





3724ffb.jpg


May 25, 2010 | 2005 Dodge Caravan

1 Answer

2001 Ram 1500 Truck 2WD: how do you remove a tail light from a 2002 dodge r...


There are for Philip screws holding your tail light cover onto your dodge. Step 1: Just remove those screws and pull the cover off. Step 2: Remove the light bracket out of the cover and replace with a 1057 bulb.

May 18, 2010 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

How does the tail light assembly come out after you remove the 2 screws on the tail gate side?


assembly or just the light cover?

The light cover should come off once the two screws are off. The assembly it self is fastened behind it. You will need to get on the ground -[ on a rubber mat or blanket] and look up under the fenderwell. There you will see the way to remove the light assembly by removing the bolts.

Jan 28, 2010 | 2006 Dodge Ram 1500

1 Answer

Remove left fear lense


open the tail gate and you will find two screws holding the assembly in. remove these screws and pull out the assembly

Aug 30, 2009 | 2004 Dodge Ram

1 Answer

Cannot get the tail light lense off to change ram 2500


Drop tailgate and look for screws holding light assembly. If all screws are removed you may have sealant holding the assembly. Gently pry it out of is seat. Behind the assembly are the sockets that require a 1/4 turn to remove. Then change bulbs as required. Let me know if this helps. Moe

May 02, 2009 | Dodge Ram Pickup 2500 Cars & Trucks

1 Answer

Rear wiper motor


raise up the tail gate . remove the phillip screws holding the handle or pull down strap.remove all other screws holding the rear plastic tail gate panel in place than start in one corner try to pull down on the plastic panel as it is also held in place with push style plastic clips.you can use a straight blade screw driver to start releaseing the clips.once you have the panel off you have done the hard part/ just unbolt the wiper motor and reassemble.
good luck chris

Mar 22, 2009 | 1993 Dodge Caravan

3 Answers

2004 dodge ram 1500 rear brake light out how to replace?


Open up the tail gate, you will see two torque screws on the inside beside the tail lights. take these out, this will free up the housing and you can change it from there.

Jan 11, 2009 | 2004 Dodge Ram

2 Answers

Rear blinker light change 2001 ram1500


Hello
Welcome to FY
open the tale gate look at the side where the light is there is 2 screw that hold the light to the box
RD

Jan 10, 2009 | 2001 Dodge Ram 1500 Truck 2WD

2 Answers

1996 Dodge Ram 1500 Tail lights


There should be two screws on the inside edge of the assembly, one next to top lense and one next to bottom lense. This removes entire assembly not just cover. these are sealed units.

Oct 09, 2008 | 1996 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...