Question about 1996 Isuzu Rodeo

3 Answers

I have a 1996 isuzu rodeo 4wd v6 and the clutch pedal is stuck on the floor and the car is stuck in second gear. I'm not sure what to do the clutch won't spring back and right before the cluch got stuck on the floor it had no pressure. The fludid resover under the hood looks to be full. Please help with and low cost ways to fix

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Same thing happened to mine. have you fixed yours yet?

Posted on Aug 03, 2013

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Slave cylinder.....Replace and bleed air out of system

Posted on May 19, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 196 Answers

Check the rod or cable have someone pull the pedal up when you are under the driver side of the car and you should be able to see what is loose on the transmission some have a spring to return the clutch to its normal location the gear is stuck because the clutch is not working hope this helps you

Posted on May 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 Honda passport lx/DX 4 door 4wd red 5 speed w/ izzuzu 32valve v6


honda/rodeo clone with the correct motor fitted
what was the question ?

The Isuzu V engine is a family of all-aluminum 75° V6 gasoline engines produced by Isuzu . ... This engine featured 175 hp from 1993-1995 and 190 hp from 1996-1997. ... in Japan, and in North America as Isuzu Rodeo and the Honda Passport . .... engine was Isuzu's newly developed 4.2L, DOHC 32 valve V8 engine, and ...








index-aelxbr5kxdhuwv0cdiipzwja-2-1.jpg

Apr 22, 2017 | Honda Cars & Trucks

1 Answer

I have a 1994 Isuzu Rodeo 5 speed V6 3.2L, it'll


Sounds like clutch adjustment or replacement. (Not disengaging the trans fully). Check to make sure you have enough juice in the clutch master reservoir and that there isn't a leak at the clutch slave cylinder first.........

Sep 13, 2013 | Cars & Trucks

1 Answer

How many highway mpg does 4wd v6 1996 rodeo get?


Gas mileage is nothing to boast about. One test Rodeo averaged just 13.9 mpg. Here is where I got that information. Hope it helps! http://consumerguideauto.howstuffworks.com/1991-to-1997-isuzu-rodeo-6.htm

May 09, 2011 | 1996 Isuzu Rodeo

2 Answers

I have a 1995 Isuzu Rodeo 2WD, 5 SP 240K miles, with original factory clutch still. My question is; Why during the winter months my Clutch Pedal loses tension and it goes (sank) all the way to the floor...


With that much play on the clutch you will need to replace the clutch and in the mean time you can float the gears by matching your rpms and your speed you may scratch a little but you can get it to the shop however its nor recommended to float gears because you can damage the gears if you do it too much.

Dec 10, 2009 | 1995 Isuzu Rodeo

1 Answer

No pressure clutch pedal goes straight to the floor 1988 holden r


If hydraulic actuated mechanism, loss of fluid, defective master cylinder or slave cylinder at the clutch. Missing pin or other part between slave cylinder and clutch arm. Loose or broken slave cylinder mounting. Missing pin or broken part between pedal and master cylinder. If mechanical linkage, look for broken components or missing pins at moving joints. If you tried to shift into gear with engine running, you may have damaged the transmission gears.

Aug 11, 2009 | 1993 Isuzu Rodeo

1 Answer

My rodeo is stuck in gear


You will need to get the clutch hydraulic system repaired before the clutch can be successfully disengaged.
Meanwhile, try rocking the vehicle backward/forward while shifting gearlever out of gear to get it into neutral.

Jul 31, 2009 | 1996 Isuzu Rodeo

2 Answers

94 isuzu rodeo clutch at the floor barely hanging on


had a recent same problem. would push the clutch all the way to floor and it still would only partially disengage causing hard shifting and forcing thru all gears. solution: underneath dash on drivers side is the clutch pedal adjustment rod. u will h ave to loosen the lock nut and then readjust the pedal. you will want the pedal to come closer to the driver (out) making the stroke on the pedal longer. now mine shifts easily. hopes this helps. bcamp4@tampabay.rr.com

Jul 13, 2009 | 1992 Isuzu Rodeo

1 Answer

Pop & clutch stuck to floorboard


probly the clutch fork or through bearing

Apr 05, 2009 | 1995 Isuzu Rodeo

Not finding what you are looking for?
1996 Isuzu Rodeo Logo

616 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...