Question about 1996 Chevrolet Camaro

1 Answer

3.8 the car wont start.i checked the fuel rail and theres is fuel,but the injector fuse wos blown.i changed it but still wont start.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

I would check to see if you now have power to the fuel injectors. There could be high resistance in the fuel injectors, which may have caused the fuse to blow.

Posted on May 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 dodge ram 1500 5.9 truck has been sitting for 2 years with a blown ****** got the ****** rebuilt and installed it back in the truck but wont start has spark and fuel at rail but injectors wont fire


98 so its a older vehicle ?? Well i know nothing about layout of this american vehicle but for its age check the fuel rail as on the end is a vacumn controlled valve so make sure its connected and the vacumn pipe isnt cracked or perished ,Anything else i have no idea sorry dont see these motors here in spain very often unless its on a imported camper van but these are normally all diesel ,have seen a 7.2 litre ford E350 petrol though but running on a gas conversion

Mar 09, 2013 | 1998 Dodge Ram 1500 4WD

1 Answer

I have a kia sedona and the injector fuse keeps blowing


how do you change the fuel injectors on a 2002 kia sedona?? the ones im trying to change are underneath the intake....are there fuses for these guys?

Jul 15, 2012 | 2002 Kia Sedona

1 Answer

My Buick roadmaster 1994 won't start changed the fuel filter but that didn't help put a brand new battery in it and it is not the starter.


Have you checked the fuel pump or fuse? First check for a blown fuse. I belive that is an electrical pump, when you turn the key on with engine off, you should hear a slight whine. The whine is the pump turning on and sending fuel to the enigne. Another way to check is to hook up a fuel presseure gauge to the fuel rail on top of the motor. There will be a rail that conects the fuel line to the injectors the rail is near the spark plugs, there should be a "capped" connection on the end of the rail. Remove the cap, hook up your gauge and check the pressure. Pressure varies w/ model, but it should be above 20psi. If you don't get a reading with the key on that indicates the problem is with the pump or the wiring going to the pump. Do a quick voltage test with the pump connections if you get 12 volts the pump is bad, if not there is damage to the wiring, a fuse is blown or the solenoid for the pump is bad. Avg life for a fuel pump is 100,000 to 150,000miles

Sep 05, 2011 | 1994 Buick Roadmaster

1 Answer

Car turns over but won't start. Can Ignition fuse


No. it is absolutely impossible that a fuse could be the CAUSE of your problem.
There may be a blown ignition fuse, but if there is, the FUSE did NOT cause it.
Please read these articles:
Where's The Fuse?
What Else Could Be Wrong?

To find out what is going on with your truck, proper diagnosis should be performed. You should check for spark at the spark plugs, check for fuel pressure on the fuel rail, check for injector pulse from the Powertrain Control Module (PCM) at the injectors, and scan your PCM for fault codes.

Aug 31, 2011 | 1999 Chevrolet Silverado 1500

1 Answer

My 1999chevy k2500 engine turns over but wont start, will catch when injected with starter fluid, yes gas in tank!


this is a fuel supply problem start by checking for pressure at the injector rail if none you will have to check for power at the fuel pump conection at the tank power will only be present when key is in start position if you have power fuel pump is faulty if no power you will have to check the relay and fuel shutoff .there may also be a fuse in the system if blown you will have to dtermin why it failed before just replacing.

Mar 15, 2011 | Chevrolet K2500 Cars & Trucks

1 Answer

95 Grandprix will not start. Found the Fuel Injection fuse blown, Unplugged all injectors and fuse still blows. With ECM disconnected the fuse does not blow yet still has power


it will not blow when ECM is disconnected, cause there is no power to the injectors when you disconnect the ECM. When you turn ignition on check for fuel pressure at fuel rail. Release pressure at nipple on fuel rail. If no pressure exists puel pump is shot. If there is pressure your fuel filter might be plugged.

Jan 12, 2009 | 1992 Pontiac Grand Prix

2 Answers

2001 nissan quest


which fuses are blown? in which part? i'm trying to find an answer but it gives me fuses in a lot of car parts.

Jun 18, 2008 | 2001 Nissan Quest

Not finding what you are looking for?
1996 Chevrolet Camaro Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...