Question about 2003 Kia Optima

2 Answers

Im tryin to put on the altonator belt and cant get it.. is there a pic that shows how it goes?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 144 Answers

If you want to put a alternator belt in a car it is easy but you need some experience, try to loose the side bolt nut in the alternator and put the belt ( The belt may be hard to put, if you can't use a lengthy flat rod to pull the belt and place in the alternator wheel).
Click the link below for a better clarity in fixing.
http://www.lihikset.net/images/kuuppa/saab96-64/Saab-96-1964-53.html
Still you can't, kindly call a electrician to put the belt.
Thank you

Posted on May 08, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 40 Answers

When u ask a quection give us the model , engin
with out details
sorry

Posted on May 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install serpentine belt


EACH CAR MODEL IS DIFFERENT. MOST HAVE A LABEL UNDER THE HOOD THAT SHOWS HOW IT GOES ON. IF YOUR CAR DOES NOT HAVE IT THEN CHECK WITH THE AUTO PARTS STORE YOU GET THE BELT FROM THEY MORE IN LIKELY WILL HAVE A PIC THAT SHOWS HOW IT GOES.

May 06, 2014 | Cars & Trucks

1 Answer

Cant find the tension bar bolt to loosen belt to put on altonator


There should be a tensioner near the center of moter when looking at belt should have a square hole that a 3/8 rachet will fit into.

Jun 27, 2011 | 2006 Chevrolet Impala

1 Answer

How do i change belt on mitubishi mirage 98


( BEFORE ADJUSTING THE ALTERNATOR BELT DISCONNECT THE NEGATIVE BATTERY CABLE OR YOU MIGHT BLOW AN EXPENSIVE HIDDEN FUSE)to change the alternator belt, you have to loosen the lower mount bolt on the alternator, loosen block shaped bolt that the long adjuster bolt goes through, and loosen the belt by turning the long adjuster bolt, take off the belt. to adjust the power steering belt, there is a long adjuster bolt that moves a tensioner pulley, first you have to loosen the nut that holds the pulley in place , now the pulley can be moved with the adjuster bolt.

May 24, 2010 | 1998 Mitsubishi Mirage

1 Answer

1984 Dodge D150 Pickup Truck V8 Electrical Problem, altonator is not putting out to keep the Battery charge. The altonator and senors have been replaced. Thanks Ken. kmkmbm@yahoo.com


Have your battery load tested. Be sure belt is not slipping . Abnornal battery draw (aftermarket accessories) or parasitic battery draw when shut off. Chrysler sells a high amp alt. for you truck.

Nov 28, 2009 | 1984 Dodge D150

1 Answer

Changing inner tie rods


Remove the wiper module assembly for more room. It will be the entire box the wiper motor sets in. Remove the wiper arms and cowl. From there you'll see what I mean (hard to explain from here). I hope this helps.

May 31, 2009 | 1999 Chrysler 300M

1 Answer

Need simple question answered about 1990 Izuzu Trooper.


One way you can usually tell is that the tensioner base mounts to engine with a bolt in the center of the casting, & pulley is offset from that casting. Put your wrench on the offset pulley bolt to relieve tension. There are various set-ups on that engine so maybe we better confirm which engine it is ?

Mar 26, 2009 | 1994 Isuzu Trooper

1 Answer

Cant put on belt right


from front of engine looking back,belt around bottom of crank pully,water pump is just above,left side of belt comes around water pump going counter clock wise,put belt over alternator,then straight across to a/c compressor,(make sure belt goes under any idler pullies,smooth side of belt to smooth side of pully)find your belt tensioner,pry back on tensioner(be carefull)and carefully place belt under roller pully of the tensioner,release and check allignment of belt prior to starting.oh ya make sure belt is in good condition.

Mar 01, 2009 | 1991 Chevrolet C1500

1 Answer

1997 MADZA MVP


sounds like your altonator belt is loose and needs tightened. if you put a new belt on with the altonator it just needs re adjusted..

Oct 18, 2008 | Mazda MPV Cars & Trucks

Not finding what you are looking for?
2003 Kia Optima Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...