Question about 2003 Honda Accord
No but be sure to have a way to hold the glass up when you take the regulator out.
Posted on May 08, 2010
Remove the door panal
bring the glass down and unscrew two bolts between the glass and regulater. lift up the glass and stick with a adhesive tape (maskin tape)
change the regulator
Posted on May 08, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 06, 2012 | 1996 Honda Accord
Check the fuses and switches. Your owner's manual and fuse-box cover have fuse and switch diagrams. Look for the power window relay and power window motor labels. Tug out the fuse and check it for damage. Check the switches for deterioration or abnormalities. You can get a new fuse or switch at an auto parts store or super center and easily replace it.
Get out your tool box if you've eliminated fuses and switches as the cause of the problem. Now you have to remove the door panel to get a better look at your window's power source. For the driver's side and passenger-side doors, remove the door pad and inner moisture barrier. Use an upholstery-removal tool to help pry the panel off. The rear windows require that you remove the two center channel screws at the top of the door frame and two lower bolts in the bottom of the door. Check under the weather stripping if those bolts aren't evident.
Lower the window until the glass bolts are visible. Use the 10mm socket wrench to remove the bolts in the large and smaller access holes. Standing at an angle inside the door, tip the glass gently toward the outside of the door. Pull it out and set it in a secure place.
Access the regulator by removing the front channel and regulator mounting bolts. Older models have additional roller bolts.
Use a digital voltage meter to test regulator power before completely removing it. A reading of less than 12 means you have a wiring or switch problem. Recheck the fuses and switches. A reading of 12 means your wiring and switches are getting power to the motor, so the motor is inoperative for another reason.
Remove the motor and regulator. Wear protective gloves and keep your hands clear of the regulator gear spring. You can expect it to snap abruptly on removal.
Use oil to grease the roller guides and sliding surfaces of the regulator after removing all the parts. Confirm that the breather pipe is in position to keep water out of your new motor.
Advance the new regulator gear with your gloved hand. Use the collar and mounting bolt to secure the new motor in place. Replace the front door run channel.
Slide the window glass back into the door. Advance the regulator with the power window control in the door until the glass mounting bolt holes line up with the access holes. Replace the window mounting bolts.
Test for smooth operation of the window. The window should move up and down easily and form a tight seal when closed. Tighten or loosen window mounting bolts as needed.
Replace the liner and door panel. Dispose of the dead motor.
Apr 14, 2011 | 1995 Honda Accord
Feb 16, 2011 | 1994 Honda Prelude
Dec 07, 2010 | 2004 Honda Accord
Jun 18, 2010 | 1994 Honda Accord
Nov 16, 2009 | 2003 Ford F150 Regular Cab
May 04, 2009 | Ford V6 Pony Cars & Trucks
Apr 29, 2009 | 1998 Mercury Villager
Oct 21, 2008 | 2001 Subaru Forester
345 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: