Question about 1991 Mercedes-Benz Mercedes Benz Sl Class

1 Answer

My mercedes 1991 300E 2.6 must need the fuel filter replaced What tools are necessary to remove it?

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Mercedes-Benz Master
  • 1,619 Answers

Not sure of what your issue is buy fuel filter is by the fuel pumps under the car rear passenger area under a plastic cover. Some combination wrenches and a good way to stop the flow of gas from both ways and you just swap it out.

Posted on May 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is 1992 mercedes benz 300ce fuel filter


You will find the filter under the car in front of rear wheels.
It will have a cover on it so remove the screws to get to the filter.If you need to change it read the manual or you can get fuel all over the floor. As well as the filter you will need the copper washers that go in to seal the banjo joints.

Mar 27, 2016 | 1992 Mercedes-Benz Mercedes Benz 300 Class

1 Answer

Mercedes clk 200 fault code p0171 system too lean bank 1


you can easer the code by this tool, and or
In the vast majority of cases, simply cleaning the MAF sensor does the trick. Consult your service manual for it's location if you need help. I find it's best to take it off and spray it with electronics cleaner or brake cleaner. Make sure you are careful not to damage the MAF sensor, and make sure it's dry before reinstalling.
Inspect all vacuum and PCV hoses, replace if necessary.
Check for a dirty fuel filter and proper fuel pressure.

Jul 27, 2011 | 2004 Mercedes-Benz C-Class

3 Answers

What do I need to do to replace a fuel filter in a '89 mercury cougar LS V6?


The filter is bolted to the frame, held on with a large worm gear clamp. There are 2 U shaped plastic clips that keep the hoses connected to the filter. Remove the clips and wiggle the lines off. Watch for gasoline coming out the filter. You might want to start the car and unplug the fuel pump fuse to relieve the fuel pressure.

Apr 28, 2010 | 1989 Mercury Cougar

1 Answer

My mercedes 1991 300E 2.6 must need the fuel filter replaced, What tools are necessary to remove it?


Its a canister type filter, a couple of combination wrenches should be used to remove it. I would look at your fuel pressure regulator and fuel distributor and make sure the fuel pumps run.

Apr 11, 2010 | 1991 Mercedes-Benz Mercedes Benz Sl Class

1 Answer

Need to change fuel filter


2008 Pontiac G5
2008: Base; 4 Cyl 2.2L; "GAS, FI, L61, VIN F" 2008: GT; 4 Cyl 2.4L; "GAS, FI, VIN B"

c9daaad.jpg

How to Replace a Fuel Filter
(DIY Complexity: Moderate / Time: 1.4 hours)

Parts:
1. Fuel Filter

Tools:
1. 3/8 in. Drive Ratchet
2. Hose Pincher
3. Flare Nut Wrench
4. Flat Head Screwdriver
5. Socket Set

Steps:
Step 1 Open the hood and locate the fuel filter. If the fuel filter is not in the engine compartment, follow the fuel line from the tank until the fuel filter is located.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 If the fuel filter has a clear case, inspect the filter element for dirt.

Step 3 If the fuel filter case is not see-through, remove it from the fuel line. Drain the fuel from the filter into a container and inspect the condition of the fuel.
o Tip: Caution: Before removing fuel lines or fuel related parts, make sure that the fuel pressure is relieved from the vehicle fuel system. To relieve the pressure in fuel injected systems, remove the fuel pump fuse and run the engine.

Step 4 Install the new fuel filter making sure that the flow is in the correct direction. The arrow on the fuel filter is the direction of flow from the tank to the engine.

Step 5 Secure the lines back onto the fuel filter. If applicable, reinstall the fuel pump fuse.

Step 6 Start the engine and check for fuel leaks.

Step 7 Test drive the vehicle to check for a rough running engine, hesitation, or lack of power.

Hope help with this.

Mar 12, 2010 | 2008 Pontiac G5

2 Answers

Trying to change fuel filter on a 2008 escape. took off 2 metal clips and bracket holding filter. filter turns around gas line, but how do you get it off gas line? I don't want to force it


They make cheap fuel line removal tools and can pick them up at any auto parts store. They can explain how to use them. Its really easy. Find the tool that's closest to your fuel line size, they also sell a universal pack for around $5. Open the tool mouth so it goes over your fuel line with male part of the tool facing the female slide it in. Then your line can be pulled out. Careful the line are under pressure with gas. It will only leak for a few seconds. Then replace your fuel filter and the lines just snap back on, no tools necessary. Check for leaks and your done. Good Luck!

Sep 17, 2009 | 2008 Ford Escape

2 Answers

Nissan 2004 Altima fuel filter location and replacement ?


filter is inside of the fuel tank and its a part of the fuel pump assembly. you need to remove the bottom section of the rear seat via 2 clips at the bottom of th eseat.you need a special tool to remove the lock ring on the top of the fuel tank. you wil also need a new o-ring to close itback up. the whole pump assembly has to come out and disassembled to replace flter. good luck.

May 11, 2009 | 2003 Nissan Altima

1 Answer

Replaced fuel relay and fuel filter still won't crank


Yes the fuel tank will need to be removed to replace the fuel pump, be very careful and use only non sparking tools, there is a potential for fire and explosion..

Apr 18, 2009 | Chrysler New Yorker Cars & Trucks

1 Answer

Mercedes 2.3-16v 1987 Cosworth flooding injection system


hi,seem all part have been check,to check further,you need to use a pressure gauge, to check the lower and upper chamber of your fuel distributor,only dealer have the tools,valve clearance is a hydraulic valve,no need to adjust,seem your car start,engine timing is ok,ty

Mar 31, 2009 | 1987 Mercedes-Benz Mercedes Benz 190 Class

1 Answer

Engine stalling


hi,you my check the distributor cap and rotor clean or replaced if necessary.

Feb 01, 2009 | 1992 Mercedes-Benz E-Class

Not finding what you are looking for?
Cars & Trucks Logo

360 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...