Question about 2000 Jeep Grand Cherokee

1 Answer

My tail lights will not turn off 2000 Jeep Cherokee

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 196 Answers

Brake pedal switch top of brake pedal stuck tap with screwdriver if that dont work replace brake light switch hope this helps

Posted on May 08, 2010

Testimonial: "Thanks, will try"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix my right brake light and fast moving turn signal on my 2000 Jeep Grand Cherokee?


The most likely problem is two burned out light bulbs. A burned out tail/stop lamp on the right side and a burned out brake lamp on the left. If you have already replaced the bulbs, then yes, the circuit boards are the next most likely cause of the problem.

Apr 07, 2012 | 2000 Jeep Grand Cherokee

2 Answers

We have a 2000 jeep grand cherokee laredo. We have changed bulbs, replaced a socket, and the drivers side tail light dosen't work. The brake light, turn signal, and back up lights do. Only the left tail...


Check the fuses as well as the wiring near the tail light.

If all seems good, get a cheap multimeter and check the voltage in the wires that go to the tail light (red probe on one wire and black probe on the other). If you get a reading about 12 Volts (or -12 depending on which wires the black and red are on) the problem is the tail light or bulb itself.

Mar 20, 2011 | 2000 Jeep Grand Cherokee

1 Answer

No tail lights....


check fuses. or the switch behind the break pedal. good luck. joyj35@live.com

Feb 12, 2010 | 2000 Jeep Grand Cherokee

1 Answer

Right turn signal flashes fast and all rear and front


your tail light has no graund. usualy plastic conector no the lamp melt down around ground cable
marko

Aug 31, 2009 | 2000 Jeep Grand Cherokee

1 Answer

My tail lights are not working properly. When I


I agree with shannongreer but also check on the swith at the back of the brake pedal. It's near the top of the pedal almost under the dash.

May 13, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Right turn signal not working on 2000 jeep grand cherokee. Also, tail light on right side doesnt work either. Bulb is good. Could this be turn signal switch inside steering collum?


check if the hazard lights work to see if it blinks if so you may need to trace down the wires to see if there is a break in it some were and yes the signal switch can do it too i hope this will help you ..

Jan 26, 2009 | 2000 Jeep Grand Cherokee

1 Answer

My rear lights on my 99 jeep grand cherokee do not work when I turn the lights on. They work fine when the lights are off. Any idea as to what the cause might be. Any place I can view a wiring diagram...


These Jeeps are notorious for the retainers breaking that hold the circuit board type wiring against the bulb contacts. With my 2000 Grand Cherokee, the brake lights would work when the headlight/tail lights were off. If the lights were on, the rear lights would go out altogether when I pressed the brakes. The easist fix would be replacing the tail light assemblies, but these are not cheap. My fix was to open up the inside cover of the tail light housing and use machine screws in each of the locations that the plastic tabs hold the retainer against the light housing.

Jul 27, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...