Question about 2000 Ford Windstar

1 Answer

HOW TO FIX THE kilometrage OF MY FORD WINDSTAR 2000, DOESNT MARK ANYTHING

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 17,970 Answers

Fuse 10 does provide power to instrument cluster and abs module.I can't say thats the entire problem.It sounds like you should have the vehicle scanned for codes from the ABS module,Instrument cluster module and the rear electronic module for the door lock concern.All of these issues are module controlled and can set codes and store them in memory to aid in the diagnostic process.

Tells us news, and, good luck.

Posted on May 08, 2010

Testimonial: "THANK YOU!! I WILL CHECK IF THAT IS THE PROBLEM"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My windstar starts but then dies ?


its a ford.... you should expect mysterious problems to pop up at any given moment.

Is there anything else that you can share that will help us solve this?

I am going to guess it is the fuel pump or fuel filter...
change the filter and that will allow greater fuel flow to the engine...
if that doesnt do it... you may need to change the fuel pump.

Aug 21, 2011 | 2000 Ford Windstar

2 Answers

2000 windstar transmission code 715 turbine speed sensor need to replace, where is it and should I do it.


turbine speed sensor is the torque converter speed ,but where and how it works i do not know,i would buy a manual vehicle nyself at least it doesnt cost the earth when the clutch wears out

Jul 16, 2010 | 2000 Ford Windstar

1 Answer

Speed gauge for a 2000 ford windstar?


check fuses under the dash. VSS may need replacment as well
.

Mar 21, 2010 | 2000 Ford Windstar

1 Answer

2000 ford windstar 3.8L Front heater has


what stopped? the air doesnt blow,if thats the case then replace the blowermotor resistor, its located on heater box on passengerside next to blower motor.hope this helps, let me know if this was the problem.

Dec 24, 2009 | 2000 Ford Windstar

1 Answer

How do I remove the top of the power distribution box of a 2000 windstar?


It should just pull off . It should be marked where to pull

Dec 06, 2009 | 2000 Ford Windstar

1 Answer

Replace windshield washer resevoir on a 2000 ford windstar


YOU CAN GO TO AUTO ZONE OR ADVANCE AUTO PARTS .BUY A HAYNES MANUAL FOR 2000 FORD WINDSTAR.IT WILL SHOW AND TELL YOU HOW TO FIX WINDSHIELD WASHER RESERVOIR.

Nov 11, 2009 | 2000 Ford Windstar

1 Answer

2000 Ford Windstar is running too lean how do


The check engine light should be on--rent a scanner, read any code(s), and pursue to repair(s). The O2 sensor has direct control over fuel/air ratio. The other sensors in the air intake system modify these settings for peak performance under varying conditions.

Oct 18, 2009 | 2000 Ford Windstar

2 Answers

2000 ford windstar... electrical mess!!


one reason for that fuse to blow is a bad brake pressure switch on the master cylinder. could be a
warranty/recall item. can also leak brake fluid. also check behind each wheel for any sign of brake fluid,
particularly the rear wheels if you have rear drum brakes. fixed one here recently where the vehicle's jack
came loose in the right rear compartment and short that circuit. make sure your jack is stowed properly.

good luck

Jun 17, 2009 | 2000 Ford Windstar

1 Answer

How do i fix a misfire in a 2000 ford windstar


The most common way to fix it is to do a tuneup, use a fuel system cleaner in the gas tank, and pull trouble codes from the computer to fix bad sensors.

Apr 02, 2009 | 2000 Ford Windstar

Not finding what you are looking for?
2000 Ford Windstar Logo

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...