Question about 1999 Ford Escort

1 Answer

Engine problem 1999 Ford Escort 4 cyl Front

Engine problem 1999 Ford Escort 4 cyl Front Wheel Drive Automatic 97000 miles
----------------------------------------------------------------
my 1999 escort sedan with the 2.0 engine has a rough idle when the car is stopped. it doesnt stalll but physically vibrates the car. when i take off it smooths out. the check engine light does not come on while the car is running. other than that the car seems to run fine.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

Sounds like you make have a vacumn leak on one of the rubber vacumn lines that attach to the intake manifold. Check all of these lines and look for cracks, pinholes and lines that have colapsed.

Posted on May 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a serpentine belt diagram for a 1999 ford escort


SECTION 303-05: Accessory Drive 1999 Escort/Tracer Workshop Manual DESCRIPTION AND OPERATION Procedure revision date: 06/06/1998 Accessory Drive Component Locations -2.0L SPI with A/Ca27194a.gif
Item Part Number Description 1 6B209 Belt tensioner 2 10344 Generator pulley 3 8620 Belt 4 3A733 Power steering pump pulley 5 8678 Belt idler pulley 6 2E884 A/C clutch pulley 7 6316 Crankshaft damper

Component Locations -2.0L SPI without A/Ca27193a.gif
Item Part Number Description 1 6B209 Belt tensioner 2 10344 Generator pulley 3 8620 Belt 4 3A733 Power steering pump pulley 5 6316 Crankshaft damper

Component Locations -2.0L Zetecaq0167a.gif
Item Part Number Description 1 10300 Generator pulley 2 19A216 Belt idler pulley 3 3D673 Power steering pump pulley 4 8509 Water pump pulley 5 6B209 Belt tensioner 6 19703 A/C clutch pulley 7 6B320 Crankshaft pulley damper 8 19A216 Belt idler pulley 9 8620 Drive belt NOTE: Drive belts (8620) with automatic drive belt tensioners (6B209) do not require adjustment.
NOTE: When a new drive belt is installed or a drive belt is re-installed after a service procedure, the drive belt does not fully seat into the pulley grooves until engine has run for several minutes.
This vehicle is equipped with:
  • a V-ribbed serpentine accessory drive belt.
  • an automatic drive belt tensioner.
New drive belts must be of the same type as originally installed.
Check the drive belt condition at 96,000 km (60,000 miles) then after every 24,140 km (15,000 miles).

Mar 06, 2011 | 1999 Ford Escort

2 Answers

Will a 87 ford ranger v6 4 wheel drive trans. fit in a 86 ford ranger 4 cyl 4 wheel drive


If automatic transmission wont work engine block's are not the same, if stander transmission you could swap out bell housing held on with four bolt's from one to the other. Good luck and hope this was very helpful.

May 19, 2010 | 1986 Ford Ranger 2WD

1 Answer

Engine Cooling problem 999 Ford Taurus 6 cyl


have u bled the cooling system ?warm the car and cut the car off right before the fans come on ,let sit for 30-35 minutes,see if the coolant drops in res. if so repeat process untill coolant stops droping ,then drive car regularly if overheating stops ,but monitor it because it will drop somemore/there has been reports of new and rebuilt water pumps nt having correct propelar mounted on them/ backwards etc. if this helps let me know roniecon@gmail.com

Jun 29, 2009 | 1999 Ford Taurus

1 Answer

Cavalier blowing out black smoke car idles fairly well considerin


Black smoke is usually unburned fuel. P0171 reads bank 1 system too lean. There isn't one answer. You need to dig further and inspect your cars fuel system, from the pump to the injectors. Because of the mileage you may want to start off with a compression test just to see where you stand with the motor. write back if you have any other questions.

Apr 24, 2009 | 1999 Dodge Intrepid

1 Answer

Engine vibrates


i had same problem check all vacume hoses front and rear of engine whene u find leak u will notice a large difference just by putting finger over it and then replace or repair hose. good luck hope it works for ya.

Apr 06, 2009 | 2000 Ford Escort

1 Answer

Engine vibration


Who repaired it? They should make good on it. The ignition wires might be crossed(spark plug wiring). don-ohio (:^)

Mar 07, 2017 | Ford Escort Cars & Trucks

1 Answer

Complete engine assembly, ford escort 1983, front wheel drive, 1.3 Lt


you can order a long block from some auto parts stores, or just google search for a 'long block 83 ford escort 1.3 liter, JASPER is a good example. plenty of websites out there that can help, shop around for best price

Feb 24, 2009 | 1999 Ford Escort

Not finding what you are looking for?
1999 Ford Escort Logo

589 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...