Question about 2006 Suzuki Forenza

Open Question

Need manual how to change valve cover gasket

Need instructions how to change valve cover gasket

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: valve cover gasket replace on a subaru svx

ALL DATA time to R&R valve cover gaskets both sides is 2.1 hours. you will need to remove brackets and connectors on either side, It will also help to take the upper plenium bolts out but not completly pull the plenium. If you don't have a lot of mechanical experiance and some basic tools. you may want to consider to have a local a shop to perform this service for you after you get a estimate. RON.

Posted on Jan 18, 2009


SOURCE: Leaks oil looks like from valve cover

You have to remove the spark plugs cables and remove the four nuts that you see when the cables are removed.

When the four nuts are removed, simply raise the valuve cover. When replacing the gasket, make sure you get the gromets as well. Those sometimes get worn or crack since they are more exposed than the value cover gasket. Make sure that you clean the cover from oil and replace the gasket with no use of silicon.

Good Luck.

Posted on Aug 04, 2008

  • 109 Answers

SOURCE: replace valve cover gaskets on subaru svx

I don't have experience with this engine but guess you won't have to remove it for valve cover gasket work but perhaps can lift it a bit [not by hand!] after loosening engine mounts.

Posted on Nov 18, 2008

  • 1066 Answers

SOURCE: changing valve cover gasket on 2001 dodge stratus, how

remove all the components in the way of the valve cover.  Then remove the valve cover and replace the gasket and reassemble.
usually about a 3 to 4 hour job.

Posted on Mar 23, 2009

  • 1 Answer

SOURCE: replace valve cover gasket

I have the same problem on a 2003 Town & Country. The cover for the front 3 cylinders is quite straight forward, but in order to do the rear cylinders I believe you are going to have to remove the cowling below the windshield. You will need a gear puller to remover the windshield wipers first, then remove the cowling. Than should give you more room to work. It's still not going to be easy, but it sure beats paying hundreds of $$$$ in labor charges.

Posted on May 04, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

How to replace a valve cover gasket on a 2003 Chevy trail blazer

Pull off the valve cover, clean it like new, then use a silicone sealer on the valve cover only, place the new gasket on it and let it set-up (around 1 hour) then bolt the cover back on the head. If you are in a hurry, skip the sealer set-up time and just make sure that the gasket does not move out of position when you put the cover on the head. You can use the truck right after the repair.

Mar 02, 2015 | 2003 Chevrolet Chevrolet TrailBlazer

1 Answer

How do I change a valve cover gasket for a 2003 maszda 2.3L

I recommend going out in purchasing the repair manual for this vehicle. You're saving about a hundred plus doing this job spending $20 on a manual isn't so bad. It's a straightforward job basically a 10 millimeter socket and remove all the bolts that are holding down the valve cover. And then anything that's in its in your way to remove the valve cover. A rubber mallet will come in handy you also cause some of those valve covers can be a little hard to loosen. once you have the valve cover off clean the head and scrape cover of any remains of the old gasket.Other than that I don't know what kind of gasket this vehicle uses weather is neopran or cork.also weather there isn't a sensor safe adhesive you need with the gasket. That's why for the 20 bucks for the manual it's worth it could answer the questions that you need to know (torque specs tools etc.)to do this job correctly.some manufacturers don't recommend an adhesive usually wouldn't neopraingasket and is he is not use. But in any event with the new gasket on the valve cover and carefully place it on the engine. Once it's on then put the bolts in and tighten them in a crisscross fashion. Then put everything you took off the vehicle to give you access to the valve's a simple job you're saving yourself a bundle please get the repair manual. Good luck

Feb 11, 2015 | Mazda Cars & Trucks

1 Answer

Bmw help line

Here's a link showing both valve cover gaskets for the 98 year. Valve Cover Gasket 1998 BMW 528I 6 Cylinders 2 8L EFI DOHC AutoZone com

Jan 11, 2014 | Cars & Trucks

2 Answers

How to replace valve cover gasket

Remove the valve cover, which is a simple bolt on component. Remove the old gasket and install the new one.

May 13, 2011 | 2004 Suzuki Forenza

1 Answer

Valve cover gasket leaking oil . how do i change gasket . i need schematics .

Since most valve covers have torque specifications to avoid warping the cover and mangling the new gasket (this may be why it is leaking), I wouldn't recommend replacing it without a service manual at hand. There are several offered on eBay with a range of prices:
1994 ElDorado service manual

Apr 02, 2011 | 1994 Cadillac Eldorado

1 Answer

How do I change the valve cover gasket?

please visit this site:-

Oct 28, 2009 | 1999 Honda Accord

1 Answer

Need to change valve cover gaskets,do you have instructural video?

I have no vedio,
But you may follow this instruction.
1. Unscrew the bolt turn it ccw.
2. take out the cover.
3. clean the cover using gas or any cleaning agent.
4. clean the surface where the gasket to be place using gasoline or equivalent.
5. lay the gasket in place.
6. replace back the cover.
7. screw the bolt in turn cw.
8. do it by random to balance the tightening of screw.
9. Done

Jun 14, 2009 | 1998 Oldsmobile Intrigue

1 Answer

Changing valve cover gasket

v6 or 4 cylinder?

SECTION 303-01A: Engine - 2.0L 1999 Cougar Workshop Manual
IN-VEHICLE REPAIR Valve Cover Removal
  1. Disconnect the oil feed sensor electrical connector.
  1. Disconnect the crankcase ventilation tube.
  1. Remove the appearance cover.
    1. Position the throttle cable out of the way, and the speed control cable (if equipped).
    1. Remove the eight bolts.
    1. Remove the appearance cover.
  1. Remove the spark plug wires.
  1. Detach the upper part of the engine front cover out of the way.
    1. Remove the four bolts.
    1. Position the front cover to one side.
  1. Remove the valve cover.
    1. Position the throttle cable to one side, and the speed control cable (if equipped).
    1. Remove the nine bolts.
    1. Remove the valve cover

Mar 23, 2009 | 1999 Mercury Cougar

Not finding what you are looking for?
2006 Suzuki Forenza Logo

Related Topics:

360 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides