air bags
get the bags scanned,
read the FSM on bags yet< (factory service manual)
or at alldata.com, DIY.
in what country? , did you read the TSB recall yet>?????
huge recall.
where is this 31 code? at>?
Trouble Code:
B1000/31 (1.8L L4 VIN R Auto)
Airbag ECU Malfunction
* Airbag sensor assy center
remove battery neg lug before touching any SRS parts.
B1000/31; Center Airbag Sensor Assembly Malfunction (2006 Corolla From 07/2005)
DESCRIPTION
The center airbag sensor assembly consists of a deceleration sensor, safing sensor, drive circuit, diagnosis circuit, ignition control, etc.
If the center airbag sensor assembly receives signals from the deceleration sensor, it determines whether or not the SRS should be activated.
DTC B1000/31 is recorded when a malfunction is detected in the center airbag sensor assembly.
If only DTC B1000/31 is output, do not clear the DTCs, replace the center airbag sensor assembly.
If any DTCs other than DTC B1000/31 are also output, troubleshoot those DTCs first.
use a real scan tool
and see all errors.
if not you guess wrong.
here is a little more info. I removed the console to look at the stereo plug in because I want to intstall an aux jack for my mp3. i unplugged the passenger supplemental airbag light connector to remove the console panel. When I reconnected it and started the car, I get the warning light. I know there is nothing wrong with the system, but obviously the computer module thinks that something has gone wrong thus the warning. Isn't there an ignition on off sequence to reset this??
×