Question about 1995 Jeep Grand Cherokee

2 Answers

The gas meter is not working

The tank is full and it show me empty at times go to full and back empty what should i do.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,201 Answers

The fuel sending unit in the gas tank is faulty. Had one in a 1992 cherokee that was bad, changed it, works perfectly.

Posted on May 07, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 32 Answers

Replace the fuel level sending unit and the fuel pump. check to see what condition the connectors are in and go from there

Posted on Jun 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dash gas gauge stops showing proper gas level once it hits half a tank. Then gauge will fluctuate between empty (light will come on), full and anywhere in between but seems fine from full tank to half


If the trouble with the gauge started after you worked on it then you likely damaged or created a restriction to the movement of the sending unit. You will have to remove the tank and double-check your work.

Mar 01, 2013 | 2000 Buick LeSabre

1 Answer

Step by step repairing a gas guage 2002 chevrolet impala


You'll need to have someone pull the instrument cluster and check the circuit boards inside.

Feb 08, 2013 | 2002 Chevrolet Impala

1 Answer

Gas Guage stays full for a long time


Usually a sign of a faulty sending unit in the tank. If that is the problem it would need to be replaced or repaired.
You could start at close to empty and then check the resistance of the sending unit with a VOM meter as you add fuel to the tank.

Aug 28, 2012 | 1994 GMC Sierra

1 Answer

Gas gauge does not work


Take a OHM meter and test the wire to the tank sender. If you have a full tank of gas you should get a reading of 8 ohms. If a hlf it will be 4 ohms. If no reading is shown you have an empty tank. Now if the meter stays at the OL setting at all times although if you bounce the Jeep to make the gas swish around and do get a reading and when the gas settles back down leveling out and returns to the OL setting the sender is bad and needs to be replaced

Mar 28, 2010 | 1989 Jeep Wrangler

3 Answers

Gas gauge is not reading correctly. Shows a full


the problem is caused by a defective gas gauge sending unit, this part is located inside the gas tank, you must remove the gas tank to replace it.

Dec 02, 2009 | 2002 Cadillac Deville

1 Answer

When the gas tank is full the gas gauge shows as empty. When the gas tank is empty the gas gauge shows as full.


Well that tells me that someone installed the wrong fuel level sensor. Your going to have to drop the tank and pull the pump and float assymbly out. Then go to a parts store and get a sending unit that has the opposite resistance of that sending unit. Just wait until the tank is empty so its a lot lighter. You can call the parts store or go down and see if there is multiple sending units. The sending units work by resistance, when the tank is full the float moves up and turns a wheel in the sending unit, which either removes or increases the resistance causing the gauge to lower. The sending units either give full resistance at full or no resistance at full and then changes as the level goes down until it does the opposite at empty.

Jul 17, 2009 | 1999 Chevrolet Cavalier

1 Answer

Gas guage not working on 2001 oldsmobile Aurora


most likely you need a new sending unit, located in your tank

Jun 21, 2009 | 2001 Oldsmobile Aurora

1 Answer

Fuel Gauge not working


The switch that you use to change tanks is probably faulty - the switch supplies power for the sending unit in the tank, and to the transfer switch for the gas lines - use a meter to check it

Nov 27, 2008 | 1984 Ford F 150

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75235 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7795 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...