Question about 1983 Peugeot 504

Open Question

Setting and how to adjust tappets saxo vtr 1.6 2000

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hiya i want to know what the three wires that go to the interior light are for my saxo vtr there 3 wires because i want to wire footwell lights any help will be great


Don't know your car, but often there is 1 ground, 1 hot from dash switch, and one extra hot from door delay circuit.

Oct 06, 2015 | Cars & Trucks

1 Answer

Citreon saxo tappet clearance


You didn't mention what year so if the vehicle is early then standard settings are .010"inlet hot and .012" exhaust hot. If late model it will have hydraulic tappets. which are self adjusting

Aug 15, 2014 | Cars & Trucks

1 Answer

Can i put a citroen saxo vtr steering pump in my citroen saxo westcoast 1.4 as my steering pump has cracked


power steering pumps ,electric ? i have swopped bits over between these units before now with varying degrees of sucess ,even the renault uses the same pump but all i can advise is strip the unit and see ?? as for the wiring then anything is possible but these cars and a few others do suffer with the ignition switch which is made by clauser ,Just buy anbother one 194 euros as a complete kit with the door locks and fuel cap as this kit is cheaper in the dealers than a individuel item ,dont forget to change the chip out of the old key for the new key

Mar 24, 2013 | 1998 Citroen Saxo 1.4

1 Answer

Citreon saxo 1.1cc 2002year tappet clearance


Saxo 1.1 dessire anyone no clearances on tappets mine are 0.2 front 0.4 back and won't start

Sep 06, 2012 | Mitsubishi Pickup Cars & Trucks

1 Answer

What is tappet settings


Hydraulic tappets are tappets that contain a small hydraulic piston, pressurised by the engine's lubricating oil supply.[5] Although the piston does not move appreciably or frequently, it acts as a hydraulic spring that automatically adjusts the tappet clearance according to the oil pressure. This makes the valve actuation self-adjusting and there is no need to adjust the rockers. Hydraulic tappets depend on a supply of clean oil at the appropriate pressure. When starting a cold engine, with low oil pressure, hydraulic tappets are often noisy for a few seconds, until they position themselves correctly.


Parts For Porsche Panamera

Jun 15, 2012 | Cars & Trucks

1 Answer

My vtr seems to be holding back on power at 3.5 to 4000 revs any answers


This make is not sold here in the US so we have no tech resources for it. Sorry.

Apr 06, 2012 | 1998 Citroen Saxo 1.6

4 Answers

Citroen saxo 1.6 vtr has fuel injector problem there is fuel at the injector rail , but the engine will not start . If I squirt petrol into the air intake manifold the engine starts , but cuts out when the...


98 citreon saxo 1.6 8valve,, won start.if it do start ,it runs for 3seconds, fuel pressure at rail is only 2to3pounds this modle have not got pressure regulator on the rail the code reader tells me no code in memory, any ideas ? john

Dec 03, 2009 | 1987 Peugeot Liberte

2 Answers

W reg saxo vtr heater and power steering


under the steering wheel there is a browny orange block connector, this needs to be cut out of the circuit and the correct colours joined to each other. this is a common problem on citroen saxos i have encountered this problem myself .

Nov 23, 2008 | 1991 Rolls Royce Rolls Royce Silver Spur

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

440 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...