Question about 2001 Jeep Grand Cherokee

1 Answer

My windows dont roll down, my interior lights dont go on when i open the door, and the interior lights turn on when i switch the dim lights switch once instead when switched all the way... Can someone tell me whats going on?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

Possible broken wire in loom between door and a pillar, open door and at front end you will see rubber boot peel this back and gently tug wires one at time normally red or black thick guage wire breaks carry out repair and should fix problems

Posted on May 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i bim and brighten dash light 2002 buick lesabre


bim or DIM ? the dimmer switch ! Interior Lamps
The interior lamps consists of two groups, lamps that can not be dimmed and lamps that can be dimmed. This first group consists of lamps that may not be dimmed. This includes those lamps that may be manually turned on by placing the interior lamp switch to the DOME position, or by opening a door or a compartment:
• Door courtesy lamps
• Footwell courtesy lamps
• Instrument panel (I/P) compartment lamp
• Overhead console courtesy lamps
• Reading courtesy lamps
• Rear compartment courtesy lamp
• Roof rail courtesy lamps
• Sunshade vanity mirror lamps

Interior Lamps Dimming
This group of interior lighting includes lamps which may be dimmed. This group uses a combination of class 2 controlled illumination and incandescent lamps:
• Air temperature switch
• Cigar lighter lamp
• Door switches
• Driver information center (DIC) switch
• Headlamp switch
• Head-up display (HUD) switch
• Heated seat switches
• HVAC control assembly
• Instrument panel cluster (IPC)
• Memory function switch
• Radio
• Steering wheel controls
• Window switches
For the interior lighting to be dimmed the following conditions must be met:
• A low light level has been detected by the dash integration module (DIM)
• Headlamp switch is placed in to the PARK or HEAD position
• Ignition switch is placed in the ON position
Then all class 2 displays and all incandescent back lighting will be illuminated to the level set by the instrument panel (I/P) dimmer switch. When the I/P dimmer switch is moved from MIN to MAX, all class 2 displays and all incandescent back lighting respond from minimum intensity to maximum brightness.
The DIM supplies battery positive voltage to the coil side of the PRK LP relay in the rear fuse block.
When the I/P dimmer switch is moved from MIN to MAX, then the instrument panel module (IPM), W/CJ2, or climate control panel (CCP), W/C67, applies a message to the class 2 communication circuit to the DIM. The DIM then applies a ground to the park lamp relay control circuit. This energizes the PRK LAMP relay and allows battery positive voltage to be applied through the DIMR fuse to the DIM. The DIM then illuminates the following incandescent lamps through the incandescent dimming output circuit:
• Cigar lighter lamp
• DIC Switch
• Headlamp switch
• HUD switch
• HVAC control assembly
• IPC
• Radio
• Steering wheel controls
The DIM also applies a message to the following class 2 controlled illumination components:
• Drivers door module (DDM)
• HVAC control assembly
• IPC
• Radio
The DDM will then send a message through the simple bus interface (SBI) to the RH front door module (RFDM). The door modules will then illuminate the following components through the incandescent dimming output circuit:
• Air temperature switch
• Heated seat switches (W/KA1)
• Memory function switch (W/A45)
• Power door lock switches
• Power window switches
The ground for these components are provided from the DDM and RFDM.
The following components are grounded at G200:
• Headlamp switch
• HVAC control assembly
• IPC
• Radio
• Steering wheel controls
The following components are grounded at G201:
• Cigar lighter lamp
• DIC Switch
• HUD switch

Mar 13, 2017 | 2002 Buick LeSabre

1 Answer

No interior lights come on when doors are opened. Very dim instrument panel lights.


theres probably a switch off to the left of the steering wheel (probably some sort of wheel looking switch for the brightness)

Dec 01, 2012 | 1999 Dodge Grand Caravan

1 Answer

1996 Ford Aerostar Van front windows will not roll up or down. When you try to roll EITHER window UP, you can hear the motor trying to work and the interior lights dim as you are doing it, but the windows...


Its unusual for both doors to fail at the same time, but not impossible.
Since you say the lights dim and you can hear noise in the doors we will assume the motors have voltage and ground.
You would need to remove the motors from the regulators to see if the motors are faulty or if the problem is with the regulators or tracks.

Aug 21, 2012 | Ford Cars & Trucks

1 Answer

Passenger window won't go up or down


open the door interior light will be on put the vehicle ignition in run postion dash lights will be on operate the window switch up and down look at dome light if it is dimming a little when operating switch window motor is no good if not remove the switch and check power at switch if none the boot between the body and door has a broken wire

Aug 09, 2012 | 2000 Plymouth Voyager

1 Answer

Power window troubleshooting


A quick way to tell what is causing a window not to work if you hear nothing when the control switch is operated is to watch the interior lights when you operate the window in question, if you move the switch to up or down and the interior lights very slightly dim (best done in the shade or at night) you have a defective window lift motor, if you see no dimming the switch is suspect or it has no power or a poor ground. This is not fool proof but it works most of the time.

Feb 09, 2012 | 2002 Honda Civic

1 Answer

Can't get my back windows to roll down?


DOES THE ROLL DOWN FUNCTION WORK FROM THE DOOR CYLINDER WITH THE KEY?HAVE ANY FLUIDS EVER GOT ONTO THE SWITCHES?DO THE LIGHTS DIM SLIGHTLY ON THE DASH WITH KEY ONBUT ENGINE IS OFF AND THE WINDOW SWITCHES ARE DEPRESSED?IF THEY DO ITS DRAWING CURRENT.CHECK FOR STUCK GLASS OR BAD WINDOW REGULATOR/MOTOR.IF THEY DON'T DIM THEN CHECK FOR BROKEN WIRING OR POOR SWITCH.

Jan 06, 2012 | 1997 Mercedes-Benz Mercedes Benz S Class...

3 Answers

The interior lights in my 2000 Ford F250 will not turn off. How can I get the lights to turn off?


Just to get the interior lights off to save your battery, you could pull the fuse. Refer to the service manual to determine the proper fuse.

To fix the problem, i would suspect one of the door switches is faulty.

Mar 29, 2010 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

I have a 94 Cadillac Deville and the driver's side window won't roll down. All other windows work. What could this be?


most likely the motor inside the door that operates the window has failed, U can test this in a simple way I have used for years, in a shaded area or in the evening press the down button of the window switch with the door open if the dome light dims ever so slightly the motor is no good, if it doesn't dim then the switch is the problem

May 02, 2009 | 1994 Cadillac DeVille

1 Answer

Power windows


Try to only roll one at a time up or down if you push more than 1 button at a time it will put a strain on the battery also try getting your battery tested to see if a cell is out. good luck!

Sep 11, 2008 | 2002 Ford Mustang

Not finding what you are looking for?
2001 Jeep Grand Cherokee Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...