Question about 2000 Buick LeSabre

1 Answer

Clunk under auto center front when turning left or right

I hear a soft clunk when turning left or right. Seems coming from under neath or side front of car. seems to be hard metalic sound as if metal is twisting or being hit with a soft pallpeen hammer. It is an intermittant frequency. It is getting louder after 2 months. I had new shocks and springs installed both front and back. Still there.

Posted by on

  • basil Dec 03, 2011

    did you ever find out what it was

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 104 Answers

Have your CV joints checked. If the CV joint boots crack, the joint will lose all the grease and accumilate dirt. This will cause a metal grind/ping when making turns. If ignored, it may cause the joint to break causing the vehicle to be stationary and unable to move. Hopefully this help!!

Posted on May 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mazda axle shaft


not anymore than any other front wheel drive car. are you having a noise(clicking or clunking) coming from the front only when turning. if so then you have a bad cv joint on the axle. its cheaper to replace the entire halfshaft(axle) than just the bad joint, as you get a rebuilt halfshaft complete. if you hear the noise when turning left then the left halfshaft is bad if you hear it only when you turn right then the right side is bad. you don`t say what issue you are having.

May 25, 2014 | 2008 Mazda 6 2.0

1 Answer

Backing up made clunk noise and when dry sterring it makes a clunk noise when turning wheels left and right


You're probably going to need a shop to look at the front suspension.
With extra weight in the back, the front could have been up enough to cause something to come loose such as a strut mount. And that could happen just from old age without the extra weight.
If it is a strut mount you may not want to change it yourself since the strut has to be removed.
I would suggest getting a couple of estimates, or more. In most cases the shop will want to do a front end alignment too because of having to remove the strut.

Apr 29, 2013 | Cars & Trucks

1 Answer

When I turn my wheels to the left and right 45 degrees past center I hear a hard "clunk" noise.


If your car has struts, its probably the upper strut mount. Don't rule out a broken spring.

Jan 07, 2013 | Pontiac Grand Prix Cars & Trucks

1 Answer

What could cause clunking sound on front left os car when turning into a dip?


Check the ball joints,drive shaft first for uneven and excessive wears.

Jul 22, 2012 | 2000 Lexus LX470

1 Answer

2001 pontiac gran am when turning left there's a


what side the does the noise come from?if right side the right cv axle if left side then left cv axle has gone bad common problem on front wheel drive cars.to make sure look under car and look next to tire there should be a black rubber boot that is accordion shaped if torn there's your problem.

Jul 12, 2009 | 2001 Pontiac Grand Am SE

1 Answer

Clunking noise coming from upper passenger side when I hit a bump.


If you aren't afraid of jacking up the vehicle, you can test to see where the problem is coming from. Jack the vehicle up by the pinch well (most newer cars have grooves cut out or that can be popped out behind the front wheels). When the wheel is in the air, try moving it side to side, then up and down. Excessive side to side movement indicates a tie rod end, up and down indicates a ball joint, and all around indicates a wheel bearing which would also be a cause for the clicking sound you are hearing.

Most auto shops will check this for you free of charge when you get an oil change, since they're trying to sell you things anyway.

Apr 14, 2009 | Saturn Ion Cars & Trucks

1 Answer

Clunking in tire


check ball joints by lifting front end and shake tires. if loose your ball joints are bad. you will hear a clunking sound as you apply brakes during driving. its the play in the ball joint. the dealer wants $600 in labor. $160 in parts at auto zone. get the ball joint press also. good luck.

Jan 27, 2009 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

Front end noise


those ball joint are bad double check it please its dangerous a noise like that can cost you alot if wheel come out hope it help fixya the post thanks pierre

Jul 12, 2008 | 1999 Plymouth Breeze

Not finding what you are looking for?
2000 Buick LeSabre Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...