Question about 2003 Chrysler Sebring

1 Answer

I have a 2003 Sebring 2.4L DOHC. I changed the

I have a 2003 Sebring 2.4L DOHC. I changed the timing belt and the battery. After this maintenance, the car would not idle. It would run fine, but if I let off the accelerator it would die. I then replaced the Idle Air Control Valve.
It ran fine the first couple of times we drove it, but now it is getting a CEL and is idling very rough. Does it just need the computer reset or is it something else?

Posted by on

  • tcunning777 May 10, 2010

    I just had the code read. It came back as P0106.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

You'll need to find out the code that is related to the check engine light. Auto Zone or Advanced Auto can get the codes from the car. That should get you in the general direction.

Posted on May 08, 2010

  • James Milzheimer
    James Milzheimer May 11, 2010

    That is the code for the MAP sensor. The sensor may be bad. I would check for any vacuum leaks, or disconnected vacuum hoses.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belt routing for 2001 Sebring 2.4 engine


Jeff, Check the attached links for your 2.4 belt routing,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Repair Guides Engine Mechanical Components Accessory Drive Belts 2...
How to Change Serpentine Belt on 2002 Chrysler Sebring
http://www.serpentinebeltdiagram.com/serpentine-belt-diagram-2001-chrysler-sebring-4-cylinder-24-liter-engine-alternator-and-air-conditioner-with-dohc-engine-02236

Jul 31, 2016 | Cars & Trucks

2 Answers

Does the engine have to be taken out of the 2006 Chrysler Sebring to replace the water pump?


NO in does not. some you have to disconnect the upper motor mount and jack it up a little bit [use a piece of wood between the oil pan and the jack if you do this] most times the water pump is easy to change.

Feb 13, 2015 | 2006 Chrysler Sebring

1 Answer

Is my 2.4 litre 4cyl 01 DOHC 16Valve sebring engine an "internal interference engine"


Hi
Regarding your timing belt, if it snaps, you will damage your engine,
every thing from the lifters to pistons , so if it needs to be changed
its recomended to do so .
good luck.
cheers

Nov 05, 2014 | Cars & Trucks

1 Answer

2.4L NOT 2.7


follow this link , should help and will get additional advice
2003 Chrysler Sebring Serpentine Belt Routing and Timing Belt Diagrams

Jun 01, 2014 | 2004 Chrysler Sebring

1 Answer

2002 sebring won't start


crank shaft position sensor

Sep 23, 2012 | 2003 Lexus LS 430

1 Answer

When to change timing belt on a 2007 chrysler sebring?


I was not sure which engine that your vehicle is equipped with. I looked at a 2.4 and 2.7 liter engine and these bolt seem to have a timing chain. This should not need the regular maintenance that the older belt models did. You should be in luck!

Have a super sunday!

Aug 21, 2011 | 2007 Chrysler Sebring Sedan

2 Answers

When should the timing belt be replaced on a 2003 sebring LX? v6 engine?


Every 80,000 miles along with a NEW water Pump as well since its right there with it

Apr 14, 2010 | 2003 Chrysler Sebring

1 Answer

Does my 2003 cadillac cts 3.2L V6 MPI DOHC have a timing belt or chain?


The 2003 Cadillac CTS 3.2 V6 uses a timing belt. GM recommends that you change your timing belt every 60,000 miles.

Feb 22, 2010 | 2003 Cadillac CTS

1 Answer

Dodge Caravan 2,4l 1997 timing belt change


you will need to change the belt tencioner aswell
if you havent don a cambelt before dont see youre local mechanic ok m8

Jan 03, 2009 | 1997 Dodge Grand Caravan

Not finding what you are looking for?
2003 Chrysler Sebring Logo

416 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...