Question about 1999 Mercedes-Benz C-Class

Open Question

MAN F2000 30.464 not starting.

The EDC light stays on on the dash. It shows two fault codes - 6 (6 short flashes) and 39 ( 3 long and 9 short flashes). What could be the problem.

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22326 Answers

SOURCE: Bosch edc 5.3 fitted to MAN D2876 lf02 engine

try blocking off the valve that connects the inlet manifold to the exhaust and see what happens ??? or just disconnect it from the inlet manifold and try that before you remove the pump to have it overhauled ,Yes we do seem a bit short of motor vehicle categorys if not a yank it doesnt exist ,and as for the spelling¿¿¿¿ DA??? pigs tails??? fire wires??looks like we will have to re invade the colonys and teach them proper queens english .The only problem with that is and thats all the english have left the UK ,Its now a third world muslim country .Anyway best of british with it ---from spain

Posted on Sep 12, 2009

Ad
ercupa190
  • 12223 Answers

SOURCE: sprinter edc light stays on engine does not start

check th IVR( is IC that regulate the power exactly to the instrument in dashboard)+ THIS CAUSE to this problem
See the troubleshooting chart for fix it .

7_25_2012_9_35_46_am.gif7_25_2012_9_36_05_am.gif7_25_2012_9_36_39_am.jpg

Posted on Jul 25, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I fix the the code edc showing on the dash broad of my man truck le1200


Wiring, schematic, electrical diagrams, service info, repair info, removal/ installation,
step wise info on everything including error codes/fault codes etc are contents of these online books they sell here on this website www.reliable-store.com
Must check it out

May 29, 2018 | Cars & Trucks

1 Answer

Got a man truck tga26-410 ,it show a code on the dash EDC00190-12 .when you rev it above 1500 rpm it cut the engine .i have alredy replased 2x sensors on gearbox


I looked through the fault code lists and could not find it, but the EDC indicates lost communication between engine and throttle control

Oct 07, 2016 | Cars & Trucks

1 Answer

My lveco 180e whant start after reverse polarity so it is showing edc on dash board .how can I fix the problem


by reversing the polarity , the ECM unit can be damaged
try replacing the ECM unit with a known good one or get the fault codes read

Jun 16, 2016 | Cars & Trucks

2 Answers

What is the meaning edc 03792-10 code. How can rectify. Man Tgx


Rohit, RE POST more info required, year,make, model #,etc and complete question.
show your appreciation by pushing the helpful button and follow me on Fixya for more tips and info.

Feb 18, 2016 | Cars & Trucks

1 Answer

Anybody with EDC light troubleshooting chart for benz sprinter 311 cdi


You need to have it scanned with diagnostic equipment to find cause, repair fault & reset ecu

Nov 29, 2015 | Cars & Trucks

2 Answers

What corrective action for fault code EDC 03781/01? MAN TRUCK TGM 15-280


go google and type i---fault codes for MAN trucks-- and there are pdf versions that you can down load for all the fault lights and codes

Jul 18, 2015 | Cars & Trucks

1 Answer

Fault code edc 00637-03 on M.A.N.410


Man tga 410 hata kodu 00637-03 nedir bu ? Yard?mc? olur musunuz ?

Nov 10, 2012 | Cars & Trucks

1 Answer

Still have check engine light problem.I replaced the gas cap and finally got the right one.Now what happens is sometimes the engine light stays out and speedometer works .Then it seems when I shut the car...


Richard, I've been racking my brain about this and it dawned on me how to retrieve your codes without a reader. With OBD1, there is a 12 pin plug-in under your dash . It should be around the fuse box area. It's long and skinny, 2 rows of 6 pins each. It should also be lettered and /or numbered. Two pins should be marked "A" and "B". Use a piece of wire and jump between the A and B. This will trigger the check engine light to flash in a sequence. This sequence will be the engine code. One long flash is a 10, so 2 long flashs will be 20, etc. Short flashs are 1's, so 3 short flashs would be 3. The codes are all 2 digits.so if you have more than 1 series of long and short flashs, there is more than one code. If I remember right the key needs to be on for this. With the codes in hand, simply type "1992 Buick engine codes" into your search engine and there will be several sites that will list the codes free. Hope this helps.

Nov 06, 2011 | 1992 Buick Century

Not finding what you are looking for?
1999 Mercedes-Benz C-Class Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

yadayada
yadayada

Level 3 Expert

79865 Answers

Joseph Prosser

Level 3 Expert

772 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...