Question about 1993 Chevrolet S-10

1 Answer

How to put serpentine belt on a 1993 chevy S-10 2.8 liter

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

You'll need to release the tension on the belt by lifting the tensioner pulley. Make sure that the is a belt routing diagram or make one for reference when installing the new one.

Posted on May 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpentine belt Diagram for 1988 chevy silverado 5.7 liter


Is this what you need? You said serpentine belt but my info showed three belts. If picture is wrong let me know.

25982247-q3wnknh4v5te2wmao3keqizj-2-0.jpg

Nov 27, 2015 | Cars & Trucks

1 Answer

3.1 1993 chevy lumina cam sensor position? And how to take out


  • SERVICE AND REPAIR

Camshaft Sensor Follow this URL for picture:_
http://alldatapro.com/alldata/PRO~V416324719~C30660~R0~OB0~P3R0H~N/0/41746052/42417623/42417638/42422763/34853741/34857029/34857030/101366976/14461280/42437587/41882479

REMOVE OR DISCONNECT
  • Negative battery.
  • Serpentine drive belt and secondary air injection drive belt.
  • Power steering pump.
  • Electrical connector.
  • Bolt (1). Refer to Figure.
  • Camshaft sensor.
INSTALL OR CONNECT
  • Camshaft sensor.
  • Bolt (1) torque to 10 Nm (8 ft lb).
  • Electrical connector.
  • Power steering pump.
  • Serpentine drive belt and secondary air injection drive be!t.
  • Negative battery cable.

May 04, 2015 | 1993 Chevrolet Lumina

1 Answer

1993 Chevy S10 Blazer Serpentine Belt replacement


You use a breaker bar to move the tensioner, remove the belt and use the tensioner to put it back. You draw the belt and pulleys on a sheet of paper before removing, otherwise there should be a small diagram of the belt and pulley positions on the fan shroud or radiator support.

Jun 25, 2012 | Chevrolet S 10 Cars & Trucks

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    1 Answer

    1997 Chevy Cavalier 2.2 liter Ac Serpentine Belt wont go on with the Tensionomer Pulley loose


    try to put it on evry pully except the smooth one.Its easir to slid it up on the smooth pully then put it around a pully with ribs on it.

    Feb 09, 2011 | Chevrolet Cavalier Cars & Trucks

    1 Answer

    What do I loosen to release and add tension on the serpentine belt for belt replacement on my 1990 Chevy S-10 Blazer with 4.3 liter V6 and AC?


    There is a belt tensioning pulley. It's spring loaded and if you put a wrench on the center nut you should be able to remove the tension on the belt...

    Nov 20, 2009 | 1990 Chevrolet S-10 Blazer

    1 Answer

    Belt change for 1995 chevy g20


    there should be a diagram sticker under the hood . first thing check to make shure all accesories move freely no locked pullys that may have shot the belt to begin with

    Apr 04, 2009 | 1993 Chevrolet G20

    1 Answer

    The engine wont turn over


    with the belt off try turning all the pullies to make sure nothing is froze

    Apr 01, 2009 | 1993 Pontiac Sunbird

    1 Answer

    1986 2.8l chevy blazer


    Doesn't it have a diagram on the radiator top cover, just under the hood?

    Lou

    Aug 30, 2008 | 1993 Chevrolet S-10 Blazer

    1 Answer

    Serpentine Belt chevy g20


    hardest part is to remember how to rout the belt theres a place u can put a 1/2 inch or 3/8 ratchet on the tensior to make the belt slide offf

    Jun 09, 2008 | 1993 Chevrolet G20

    Not finding what you are looking for?
    1993 Chevrolet S-10 Logo

    313 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    76630 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8499 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...