Question about 1999 Porsche 911 Carrera

1 Answer

Water tempreture rises and the light comes on and sometimes goes off and water poors out of the expansion tank in the rear!!!...I replaced the thermostat already I used original parts. Could it be the radiator?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 31 Answers

When water temperature rises it's an indication off a head gasket busy blowing or already blown.this would blow water into the oil. make sure you don't have the engine overheating. this could cause a number off other headaches. have the car towed to a good mechanic. do not use the agents because they will make you hate porsche. I take take it it has the flat six engine and will use two head gaskets on each side. I would order this and buy it myself. you will save money. give it to the mechanic who only does the labour. people think that when you drive a porsche there is money to be wasted. take care

Posted on May 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

L200 Warrior.Temp gauge rises then falls back to normal on driving.


The gauges rises fast and drops fast because there is air in the system. I would fill it first/purge the air out as it is running. If it still discharges on the floor, you might want to change the T stat and or water pump.

May 22, 2016 | Cars & Trucks

1 Answer

No heat running hot i changed thermostate


You have a blocked heater pipe or pipe running to heater, some vehicles have a electric valve on the inlet pipe of heater that open & close allowing water through, they sometimes become stuck & need replacing. Also the system may have air in the system, you will need to bleed it.
But If you have water bubbling up in the header tank (expansion bottle) if you see when engine warms up water rising in it & also dropping in it, then your water pump will need replacing, because it is not pumping the water around the system.

Jan 22, 2013 | 2000 Dodge Durango

1 Answer

Why does my 1994 bmw 318i coolant disappear from expansion tank?


iT SOUNDS LIKE YOU HAVE GOT AN AIR LOCK ....yOU NEED TO EXPAND YOUR EXPANSION TANK WITH A LARGE FUNNEL.... THIS ALLOWS THE AIR TO PUSH THE WATER UP WITHOUT LOSING IT ALL OVER THE FLOOR.......THE CAR NEEDS TO RUN UP TO TEMP TO ALLOW THE THERMO TO OPEN....THIS WILL ALLOW THE AIR & WATER TO FLOW ALL THROUGH THE SYTEM UNTIL IT REACHES THE EXPANSION TANK................HOPE THIS HELPS......PAUL B.

Aug 16, 2012 | 1994 BMW 3 Series

1 Answer

Why does my 1994 bmw 318i coolant disappear from expansion tank


you have a leak somewhere in your cooling ststem

Aug 16, 2012 | 1994 BMW 318

1 Answer

2000 vw beetle 2.0 L, low level coolant light...engine mil code 1256


not the pump but air in the system or a broken wire to the coolant level sensor
that sensor at the top of the radiator tank has to be completely immersed in coolant or the circuit is broken and the light comes on
same effect id the wire to that sensor is broken in the insulation

Jun 16, 2017 | Cars & Trucks

1 Answer

Coolingsystem. exspansion tank leakage. maybe the


you said " till the water dissapears" , I am hoping that you are not running just strait water in the cooling system. Especially in a hot climate.
You must have antifreeze/coolant for the system to work properly. It will dramatically raise the boiling tempreture. If you run strait water , as soon as the engine reaches 100 c the water boils , and the pressure of the steam could burst a hose , or an expansion bottle. If your expansion bottle keeps failing , I would look at it as the effect of the problem , not the cause of the problem.

Apr 18, 2010 | 2001 BMW 330

1 Answer

Water leak from top of expansion tank.2000 BMW 316i se


The water (coolant) in the expansion tank will rise and fall with the engine temperature. What the expansion tank does is collect and return coolant to and from the engine. When the engine warms up the coolant gets hot, builds up pressure and opens up the radiator cap. The coolant then goes into the expansion tank. Now when the engine cools down the pressure drops in the cooling system and the pressure drop (vacuum) pulls the coolant back into the engine via the radiator cap. The radiator cap allows the cooling system to build up pressure and by doing so increases the boiling point of the coolant, but when that pressure exceeds the caps rating the cap opens and the coolant goes to the expansion valve. The cap has another part to it that when the engine cools down and a partial vacuum is created in the cooling system a "valve" in the radiator cap opens and allows the coolant to be drawn back into the engine. I would look at your radiator cap to see if any gunk or build up is on it, and check the rubber gaskets for cracks. It's easiest just to replace the cap because they are inexpensive and easy to replace (2-10 dollars). The expansion tank should have two hoses on it. The one on the bottom comes from the radiator and the one on the top (possibly part of filler cap) runs down and is open to the ground. That way if it is overfilled or becomes overfilled it will slowly leak onto the ground. When and if you change your radiator cap, make sure the engine is cooled down, remove cap and start engine and turn heater to full blast, full heat. Leave the cap off and let it run until engine warmed up. This should burp out any air pockets that may have happened when coolant was changed. Also top off the coolant in the radiator while it is running. Hope this helps and good luck

Apr 03, 2009 | 1992 BMW 3 Series

1 Answer

Porsche overheating & coolant loss through expansion tank


Check this out. Had the same problem. Easy fix. When you pull up at the lights does it blow steam everywhere as your water drips onto the exhaust. Next step is the water gets onto the coils engine light comes on and it mis fires!! Anyway solution. As it is doing it when you look at the bottom of the expansion tank you will see the water dripping. The tanks had a weakness and have I believe now been modified. Take it off and put your fingers over two of the three pipe holes, then blow down the other. Wifes often good at this!!! You will here a hissing as the tank has a pin hole in. It comes out fast as the pressure builds. To remove the tank undo the air box (1 x 10mm bolt and the screw on the large jubilee clip) Then undo the two petrol pipe bolts ensure your engine is cold. You should need a seventeen mm spanner. Then just under the engine lid you will see a 10mm nut which you need to undo. The box then slide forward toward the middle of the car and then back in a fastion!!! Give it a good blow you will see it. If you really must get in the bath with it and do it under the water.
Now get another and replace it.
Good luck everyone..... j 

Mar 12, 2009 | 1999 Porsche 911 Carrera

1 Answer

Porsche carrera 911 1999 3.6 overheating problem!!!


either the expansion tank is just cracked or there is a head gasket problem.

Mar 12, 2009 | 1999 Porsche 911 Carrera

1 Answer

Coolant issue


broken fan belt water pump dont turn water dont circulate its gonna overheat alternator dont turn battery light stay on you said the bottle was full and when it cool down it was on low level that normal radiator took back what it was missing check the belt HOPE IT HELP FIXYA OUR POST THANKS PIERRE

Jul 11, 2008 | 2002 Mazda Protege

Not finding what you are looking for?
1999 Porsche 911 Carrera Logo

353 people viewed this question

Ask a Question

Usually answered in minutes!

Top Porsche Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

881 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Porsche Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...