Question about 1990 Toyota Pickup

1 Answer

1990 toyota pick up has power everywhere. when

1990 toyota pick up has power everywhere. when you turn key and press start button there is nothing

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 3,640 Answers

Check and see if there is power through switch, if not replace it. if yes there is power, then see if power is going to button.if power to button and it will not work, then its the button or wiring to starter.

Posted on May 07, 2010

  • carl May 07, 2010

    check all the fuses, for the ignition.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1993 Toyota pick up won't start and the brake pedal is stuck pressed in. When I turn the key everything powers up but the engine makes zero sound


If you have an automatic trans, neutral safety switch could be bad. Try starting in neutral, or use jumper wire to bypass it. Could also be bad solenoid.

Jul 11, 2015 | Toyota Cars & Trucks

1 Answer

1990 grand marquis has 40 psi to fuel rail. Injectors dont seem to open. Car wount start. Car starts and runs when fuel is sprayed directly into intake.


A lot of cars, trucks, SUV's, Toyota 4x4's will not start , until COMPLETELY assembled. I have left off just the last air boot between the filter & intake throttle body, & NOTHING. Then sprayed a touch of "starting fluid" & Varooom. It came to life. I checked fuel rail, it checked out, still nothing. I gort angry, had picked up the vehicle cheap, for a quick "flip" for some extra money while the wife was hospitalized. I didn't have any more time to fool with it. Put the boot back on between the filter & throttle body. Put a For Sale sign on it. Turned the key....to turn the whell to roll it down into the yard, & it fired & ran. After scratching my head a while, I took the boot off, NOTHING ELSE, no start.sure it is completely assembled.

Sep 08, 2011 | 1990 Mercury Grand Marquis

1 Answer

I changed oil on my 2006 Tacoma pick up, how do I turn off my maint light. Tks John


Try this procedure.

1. Turn the ignition key up one notch. (The dash lights will not be on)

2. Press and hold down the Trip Meter Button next to the odometer.

3. While continuing to press down on the Trip Meter Button turn the ignition key to the next notch or the "Run" position, the dash lights will come on but do not start the engine.

4. Continue to press down on the Trip Meter Button until the Maintenance Required light turns off.

The Maintenance Required light should now be reset.

Nov 06, 2010 | 2006 Toyota Tacoma

1 Answer

When I turn the ignition key in my '90 Cressida


Do the dash lights come on with key on?Try starting it in neutral.Turn key on,and foot on brake,and shift the gear shift into drive,and back into park,kind of hard,Now try to start it.Let me know right what happens,we will go from there.

Aug 29, 2009 | 1990 Toyota Cressida

1 Answer

Car alarm activates when trying to jump start


look under the dash on the driver side look for button, (valet switch) press button and then crank.

Aug 24, 2009 | 1990 Toyota Cressida

2 Answers

My 1990 Toyota pickup: normally to start it you press the clutch all the way in while turning the key. Now this is not working. The last time it did start when I pressed the clutch in there was the sound...


Push the clutch down while you are looking at the switch, it is right at the top of the clutch pedal. My bet is that there is a gap and the pedal is not engaging the switch. The sheet metal on the fire wall probably gave way. Check it out, then you can reinforce the firewall that the clutch safety switch is mounted on. Good luck. I just had this happen tonight. Much quicker then tracing wires.

Aug 09, 2009 | 1990 Toyota Pickup

1 Answer

1990 toyota pickup wont start/turns over no spark or fuel


there may be a bad contact problem check the wire running into the fuse box and look at the relay for the efi

Nov 25, 2008 | 1991 Toyota Pickup

Not finding what you are looking for?
1990 Toyota Pickup Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...