Question about 2000 GMC Sierra

1 Answer

My 2000 gmc sierra will not crank once i turn the key. my light and gauge come on but the truck will not turn over. what should i be looking for to fix my problem?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

Check battery voltage, connections clean, voltage to battery, ground to engine block, and for signal to start wire on starter,

Posted on May 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sierra neutral safety


Check fuses I believe there is a main starter relay under the hood in the fuse box. Will it crank in neutral.

Apr 13, 2014 | 2002 GMC Sierra 2500HD

1 Answer

I have a 2008HD GMC Sierra 4WD Diesel - I need power for my new pillar gauges. Which fuse in the cab fuse box will supply keyed accessory power and no power during ignition/cranking?


depending on what brand and style of gauges you use, you might want power with the key in the start position. I have Autometer electric gagues in my Ford diesel and the power is "on" anytime the key is on or in the start position. If you don't need power during the cranking cycle, then I would probably use the radio fuse.

Aug 29, 2011 | 2008 GMC Sierra 2500HD 2WD

2 Answers

This morning tried to start my 03 sierra 1500, i opened the driver door cab lights came on, put key into the ignition turned the key and the lights went out and the truck would not even crank nothing....


Try jump starting it. I suspect your battery is dead. After time they don't hold a charge as deep as they once did. Have it load tested to verify. Your lights and other options don't draw nearly what your starter needs.

Mar 10, 2011 | 2003 GMC Sierra 1500

1 Answer

Won't start turn ignition on does not crank gauges work battery is good already cleaned battery post and checked all fuses the voltage gauge in dash shows to be a little weak and the heater blower is not...


the best bet is to go to the started and check to see the signal wire is getting current when you try to crank it, if not you locate the signal wire on the starter which is the small wire and jump it with power, if it is not doing anything then your starter is bad. if it turns then your problem is somewhere else.

Feb 26, 2011 | 2000 GMC Sierra

1 Answer

2000 GMC Sierra signal light sound doesn't shut


I have the same problem. I replaced my flasher and it didn't help. Were you able to solve the problem? Thank you in advance

Jul 05, 2009 | 2000 GMC Sierra

1 Answer

99 GMC Sierra Pickup: Crank but no start. starts with starting fluid but dies. changed out the fuel filter. still not start. Do I have a bad Fuel Pump? Security light flashes then goes solid after 10 min....


The theft light issue is a good observation. Have you replaced the key tumbler or an ignition component lately? Has there been a lightning storm close very recently?

What the flashing security light is indicating is an attempt to relearn the key you are using.
Turn the key to run position, allow light to flash for 10 minutes, when light stops flashing turn ignition to OFF position for 5 seconds, turn ignition to run position and start over. Do this for 3 consecutive cycles, the the theft system will relearn the key cylinder code and store it once again.
Try that first before you go any further.
Let me know what you find.
Regards,

Apr 30, 2009 | 2000 GMC Savana

1 Answer

2000 gmc sierra fuel pump


Orig factory electric fuel pumps turn off seconds after loss off oil pressure

Mar 28, 2009 | 2000 GMC Sierra

Not finding what you are looking for?
2000 GMC Sierra Logo

Related Topics:

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...