Question about 2004 Ford Focus

1 Answer

Just had new clutch fitted on 02 ford focus 1.6 now making noise but stops when i press clutch down

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 238 Answers

A couple of things comes to mind, when you press the clutch you disengage the transmission. When the clutch is not pressed the transmission still spins inside even when it is in neutral. Sounds like a bearing inside the transmission is making noise, did they put fluid back in the transmission? Also another common source of noise is the throw out bearing, it is on the input shaft, it is the actual part that presses against the clutch pressure plate, usually though they make noise when the clutch is pressed and quiet down when released.

Posted on May 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 ford focus zx4 ac compresser making noise when ac is turned on


Yes, it could be the ac clutch or the compressor itself.

Jul 08, 2012 | 2005 Ford Focus

1 Answer

Clutch makes a noice when not pressed down


Yes, all manuals with clutches have a clutch release bearing, or throw-out bearing as used to be called. If old or worn or bad, they can make a whistling noise or high pitched squeal.

Apr 17, 2012 | Ford Focus Cars & Trucks

1 Answer

I have a 2005 Ford focus. I first noticed a rumbling noise which seems to be coming from the front drivers side wheel. If I turn left the noise dies down but I'm not convinced its the wheel bearing. It has...


I have the same problem. I had five new bearings fitted ... one on each wheel and one on the long drive shaft. The noise is now ten times worse so I would guess a faulty "new" bearing being fitted. Ford say that it can only be the final drive bearings in the gearbox now which means an exchange gearbox (not expensive ... around £350 - £400) but add labour and fitting a new clutch while the opportunity is there, I'm giving £700 a nasty look. If I am in neutral with engine running, the noise is not there. If I coast out of gear (with clutch in or out), the noise is there ... can only be the wheel bearings or gearbox driveshaft bearings.

Aug 17, 2010 | 2005 Ford Focus

1 Answer

My ford focus zetec makes a rattleing noise


spraying WD40 on drive belts is not a good option as it can cause slippage it is better to use silicon spray or ordinary soap,rub the soap on the belt when the engine is stopped,as for the squeak it could well be the tensioner replace it first it may be the cheapest to start with.....hope this helps....cheers

Jul 26, 2010 | 2001 Ford Focus

1 Answer

I need a diagram to show where the clutch pedal spring fits on a 53 focus.the top bit is obvious but i cant find where the bottom hook fits ---.frosty


The clutch pedal return spring fits onto the cicular pressed steel ring that surrounds the clutch linkage. There is a tiny hole on the top edge of the steel pressing. Difficult to see and best found by feeling around top edge but take care as pressed steel has sharp edges.

Sep 27, 2009 | 2003 Ford Focus

1 Answer

New 02 sensors fitted but same error codes came back


Check the wiring very carefully. A damaged wire can give he same code. Be sure there are no exhaust leaks.

Mar 20, 2009 | 2004 Ford Focus

1 Answer

Ford focus 53 plate wont start


may have problem with selonoid on top of starter jamming give it a tap with hammer then try

Nov 22, 2008 | 2003 Ford Focus

Not finding what you are looking for?
2004 Ford Focus Logo

Related Topics:

394 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...