Question about 1997 Suzuki X-90

1 Answer

Crank shaft sensor on a suzuki x90

Im trying to locate where the crank shaft sensor is on my suzuki x90 it is a 1997 model and a 1600cc with auto gearbox ..any ideas
the r.a.c said this is the problem and it happens when the engine gets hot it lacks power and cuts out.it sometimes starts when its cold again.
apart from main dealer any ideas where i could get one.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 40 Answers

Allmost thats the problem
sensor should be under the main pully (crank pully)
resistence between the probs are 360 - 460 ohms

Posted on May 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gas burning to fast on my 1997 Suzuki x90


a Suzuki Jeep, a Japanese jeep?

high mpg . x90

(CEL glowing all the time?) ever scan it for DTC errors. its not hard.

http://www.fixkick.com/MPG.html

Feb 05, 2014 | Jeep Cars & Trucks

1 Answer

Doing a 1.6l sierra conversion with x-90 engine 1997


wow, no name of both cars. and both engines. "sierra" what's that>?
engine swaps are complex (done many)
my wild guess, is you are asking for the 1997 EFI system schematics for the 1997 EFI?
is this M/T or A/T , the A/T now has TCM , inside the PCM/ECU.
you cant find it because, its at alldata.com and didnt look there.
its there,and at mitchels, and all FSM sold at fleabay.
im putting X engine and EFI in to what car.?

only the 1996 is online and free.
the dizzy has 7 pins. and a base ground.
here is just the dizzy. on a 96 G16B engine. im sure 97 is same.
http://www.fixkick.com/ECU/1996/EFI1.jpg

the X90 is a very rare car and doc.s are the most lacking
and ive found the emmision changes, lag the Sidekick by 1/2 year.
tricky beast the x90 (EGR differ) That means the ECU is too.

tell exactly what you are doing. and what wires are unknown?
and get far better help..
i just looked at one major online source and it shows doing service
1997 , with 1989 engine parts..... this is common in the suz world.
bad docs.





Jan 03, 2014 | 1997 Suzuki X-90

1 Answer

Trying to locate the crank shaft sensor on a 2002 Suzuki XL-7 Where is it located?


located on the front / lower engine section by the crank pulley. You can identify it pretty easily if you have the new part in hand to compare it too.

Mar 09, 2011 | Suzuki XL7 Cars & Trucks

1 Answer

Locate crank shaft sensor on suzuki xl7


Need to know the location of the crank sensor

Sep 05, 2010 | 2002 Suzuki XL-7

1 Answer

Im trying to find the location of the crank shaft position sensor for a 2002 ford taurus. Im wanting to replace it myslef.


Hi you will find the crank shaft sensor on the passenger side of the engine on the back side right behind the harmonic balancer.
If you remove the front tire and the plastic splash shield you will be able to locate it easier. Hope this helped happy motoring

Aug 26, 2010 | 2002 Ford Taurus

1 Answer

Where's the crank shaft sensor???


1997 Dodge Intrepid 3.5L MFI 6cyl

The Crankshaft Position Sensor is located: Under hood, driver side, lower engine area, mounted on side of transaxle housing

Good luck (rated this help).

Sep 24, 2009 | 1997 Dodge Intrepid

1 Answer

Car cranks but won't start. Diagnostic code says


I changed all the parts I mentioned and finally I decided to try the crank shaft sensor and if that didn't work I was going to replace the cam shaft sensor. Luckily the crank shaft sensor worked but only after I replaced all the other parts. But at least now it finally started.

Thsank you.

May 17, 2009 | 1997 Dodge Grand Caravan

1 Answer

Oil burn vitara 1995 - 1600cc


check the cam shaft,or crank shaft seals, or valvue cover seal.

Sep 30, 2008 | Suzuki Vitara Cars & Trucks

Not finding what you are looking for?
1997 Suzuki X-90 Logo

322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...