Question about 1997 Hyundai Sonata

1 Answer

Can a sonata bent valves if cam belt snaps and what is the timing marks 2.0 gls

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 31 Answers

The sonata has a 16 valve machine and works with a timing belt and not a timing chain. if the belt snaps it will bend the valves. not all the valves but some of them. a secondhand top with valves shouldn't be expensive. I would change all the valves. sometimes a valve cen bend so minimal it can't be picked up by the eye. you don't want take the top off again. it's a fairly simple machine. a mechanic should help you with the timing once you're done. good luck

Posted on May 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My vw beetle 2.0 2002 fan belt snap i dont have sample any one can help me with a size of the belt


The snapped belt has a number mark.

How To Install Replace Engine Serpentine Belt Volkswagen ...

? 6:09
https://www.youtube.com/watch?v=urBVruIk348
Dec 31, 2011 - Uploaded by 1A Auto Parts
How To Install Replace Engine Serpentine Belt Volkswagen Beetle 1AAuto.com ... Well, the serpentine belt on my Bugbroke. And, didnt know ...

Help! Serpentine belt broke, need advice. - TDIClub Forums

https://forums.tdiclub.com/showthread.php?t=323672
Jul 11, 2011 - Basically, I think the serpentine belt blew on her, she drove about 1/8 ...TDI(s): 2005 Passat Wagon, 2004 Jetta,99.5 Golf ... BTW, last year I lost my AC belt rather abruptly. .... 2005 VW Passat GLS TDI (Chipped, BSM delete, and Manual ), 2007 VW Eos 2.0T, 2002 Mazda MPV ES, 2015 Toyota Sienna XLE. 1.6 tdi alternator belt tensioner bolt snapped
Dec 29, 2013
Serpentine Belt Tensioner (A4 ALH) Keeps breaking!!!!!!
Jul 29, 2013
Serpentine belt tensioner?
Sep 17, 2012
ALH Serp. Tensioner Damper Failure w/ pics and video
May 21, 2011
More results from forums.tdiclub.com

VWVortex.com - Broken timing belt, valves likely bent

forums.vwvortex.com > ... > Golf IV & Jetta IV

Dec 19, 2015 | Cars & Trucks

1 Answer

With marks i use _or . at the cams


look on the back of the cams to see if their are any slots on them sorry not experianced like a dealer fitter on this car so go back to basics and look ,firstly is this engine a rebuild or something or has the timing belt snapped ,if so is it a valve free engine or have got bent valves ask at dealer for this ,then TDC no1 with plug out and long thin screwdriver to locate the TDC then look at the valves engine rotates to the right so its inlet cam lobe up and to the left ,exhaust up and to the right then look for what could be a corresponding mark ,before cranking engine make sure you turn it over with a rachet and socket first 360? to ensure no valves crunching

Feb 24, 2012 | 1999 Mazda 626

2 Answers

Recently my sonata 2.0 gls cam belt snapped. we


Cams could be in the wrong position. I would take it to the local automotive shop and have them take a look at it.

Feb 15, 2010 | 1997 Hyundai Sonata

2 Answers

Timing belt snapped


hi from uk the cambelt timing marks for accent 1.3/1.5 petrol are as follows= the cam cog has a hole drilling between the outer toothed and the central securing bolt this hole at TDC number 1 cyl is at top central and lines up with a V cut in the cyl head at rear of cog ? the crank cog at TDC number 1 cyl is a pop mark on both the cog and on thefront face of engine quite noticable ! these line up and are at approx 12 -30 pm when viewed fit new belt from crankcog in anticlockwise ie crank then cam then tensioner HOWEVER! if you are considering just replacing belt and tensioner ? be warned this engine is an interferance engine that is to say if belt fails whilst driving there may/will most probably be damage to the valves (bent) due to contact with pistons so would advise caution and suggest compression test all cyls after fitting new belt and tensioner and before rebuild completely once valves have bent they will not contact pistons again but you will have serious missfire/s and probably back fire up inlet manifold coupled with failing to start if engine is high milage ? consider removal of cyl head and check? de coke and replace damaged or best all valves then engine will have improved performance and more milesin future hope this helps

Nov 28, 2009 | 2001 Hyundai Accent

4 Answers

1992 Volvo 960 Broken timing belt - need to locate alignment marks for crankshaft and camshaft and associated reference marks for TDC or other position. Car was cranked AFTER belt broke - Crankshaft Is...


IF U BROKE THIS BELT WHILE DRIVING U HAVE BENT THE VALVES IN THE ENGINE, THIS IS WHAT IS CALLED AN INTERFERENCE DESIGN ENGINE, THAT MEANS WHEN THE TIMING BELT BREAKS THE PISTONS HIT THE ENGINES VALVES

Nov 11, 2009 | 1992 Volvo 960

1 Answer

Timeing belt snapped


if timing belt snapped while engine was running valves are bent.number 1 cylinder is closest to these pulleys(gears).
the timing marks are for twin

7cc01fe.jpg

Jul 18, 2009 | 2002 Daewoo Lanos

1 Answer

Snapped timming belt


Remove number one spark plug.Rotate engine hand and cam separately until piston is at top for number one cylinder and ignition rotor is aligned at number on hole. Now you can install timing belt. Rotate engine by TWO crankshaft resolutions. Recheck timing marks. Now perform compression testve to with all spark plugs out on all cylinders. If one is low then you have an interference problem and will have to remove cylinder head to have bent valves repaired.

Mar 01, 2009 | 1998 Oldsmobile Bravada

2 Answers

Timeing belt


IF YOUR TIMING BELT BROKE OFF BEFORE YOU CHANGED THE TIMING BELT DO YOU HAVE TO TAKE THE COVER OFF OF THE HEAD VALVE LOOK AT THE CAMS AND YOU WILL SEE THAT THE VALVES ARE BENT IF THE CAM IS NOT TOUCHING THE VALVES ARE BENT BEFORE YOU ALINE THE CAM GEARS YOU HAVE TO PUT THE CRANK SHAFT GEAR IT HAS A MARK AT THE BOTTOM OF THE OIL PEN MAKE SURE THAT WHEN YOU GET IT ALL SET UP RETURN THE GEAR TO THE MARK ON PULLY ALSO THE TIMING MARKS ON THE CAMS HAS TO MARKS ON THE COVER THE LEFT CAM GOES AT 12:00 THE RIGHT CAM MAKE SURE THE EXHAUST LINE LINES UP AT 12:00 OTHERWISE IT WONT START BECAUSE YOU DONT HAVE NO COMPRESSION I HOPE THIS IS HELPFUL FOR ANYBODY THAT NEEDS TO REPAIR THE ENGINE



ALCANTARAMONICO@YAHOO.COM

May 16, 2008 | 2000 Daewoo Leganza

Not finding what you are looking for?
1997 Hyundai Sonata Logo

Related Topics:

361 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...