Question about 1997 Toyota Camry
Pull carpet back remove 2 nuts holding assem,flat handed smack the assem towards rear of car then just turn bulb housings counter clockwise and remove bulb hope this helps please rate
Posted on May 07, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Removal of the plenum is pretty straight forward. You will need to replace the plenum gasket after you remove it; the gasket is not reusable. Personally, if I was going to take the trouble to remove the plenum, I would replace the plugs and wires back there, also.
I know, I have a 93 Camry V6, and it is a real pain to do the plugs and wires with the plenum on. There are no secrets or great tips on the plenum removal, just take your time. Remember that there are different size bolts, and where they go. Please get back to me if you need any more info...Hope this helps, and thanks for choosing FixYa to resolve your issue.
The graciousness of a FixYa rating for my assistance would be greatly appreciated.
Posted on Dec 15, 2008
SOURCE: 1994 Toyota Camry Tailight Out
They are indeed accessible from the back of the trunk. In your model year there are two or three plastic pins holding the carpet to the metal so you will not see the bulb and wires. Pull the pins out with pliers (might use a bit of force) and you shall uncover the secrete wires leading to the bulbs. Screw the bad one out and you can get a replacement from a parts store.
Posted on Jan 19, 2009
That code is for the evaporative emmisions system. Here is a link to an open forum you can go to, this will help you understand what it is, and why. The vehicle on the site is a van, but the code, and parts involved are one in the same, so don't worry about the difference in vehicle. The van is a toyota, and this is the information on the p0446 code. Hope this helps you.
Posted on Mar 08, 2009
make sure the belts are tight, the alternator belt is usually the noisey one but check them all. hope this helps.
Posted on Dec 21, 2009
Tips for a great answer:
Jan 10, 2014 | 1997 Toyota Camry
Dec 26, 2013 | 1997 Toyota Camry
May 16, 2010 | 1992 Toyota Camry V6
Mar 02, 2010 | 1995 Toyota Camry
Dec 21, 2009 | 1997 Toyota Camry
Nov 14, 2009 | 2002 Toyota Camry
Oct 25, 2009 | 1998 Toyota Camry
Oct 20, 2008 | 1997 Toyota Camry
45 people viewed this question
Usually answered in minutes!