Question about 2002 Volkswagen Passat

1 Answer

Transmission modular failure how to fix that and where its located?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 564 Answers

Usually you can find this module on the side of the tranny held inplace by a single screw and a bracket if not on the tranny very close to it if you cannot find it it may be internal which means that you will have to drop the tranny in order to replace it. if its external just take the screw out and the bracket off pry up on the module it should pop out replace the new in reverse order but a little trans fluid on the seal of the new one to aid in seating the module.

Posted on May 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the automatic transmission modular located on 2001 buic centry


Do you mean the transmission control module ? It is incorporated into the engine control module . PCM - powertrain control module .

Powertrain Control Module (PCM) (L36/L67)
Left front of the engine compartment, inside the air cleaner assembly
Engine Controls Component Views in Engine Controls - 3.8L
Powertrain Control Module Connector End Views in Engine Controls - 3.8L
Powertrain Control Module (PCM) (LG8)
Left front of the engine compartment, inside the air cleaner assembly

Oct 04, 2015 | Cars & Trucks

1 Answer

Where is the transmission modular valve located on 98 ford taurus


Check to see if you can see a vacuum hose runnning down to the tranny, it will be what your modulator hooks up to. Btw, check the hose for breaks burns or other dammage that may cause the modulator not to work properly. Hope that helps.

Mar 01, 2015 | Ford Cars & Trucks

1 Answer

2001Chevrolet van will not start no juice gettinto modular


it could be that your transmission linkage cable between your cabin gear select/shifter and your transmission has become disconnected.

another cause of sticking in a gear would be a torque converter (basically, the "clutch" of an auto transmission) gone bad. first step to check on the transmission physical health is to check the tranny fluid. it should be a very bright, transparent red- free of smell. if it is crimson, dark, or opaque, and/or smells almost "fishy", change the fluid immediately, and dont expect the transmission to hold out for too much longer, if the fluid has that smell and/or is full of metallic specs.

if you have a lot of miles on the vehicle, you may want to have a shop change the automatic transmission fluid anyway, and check for any metal shavings in the drained fluid.

Dec 29, 2014 | 2001 Chevrolet Express

1 Answer

Where is the transmisson modular located on 4t80e tranny


Year,make and model? Old modules were on the passenger side. At the rear of the transmission. Vacuum line went to it.

Dec 04, 2014 | Cars & Trucks

1 Answer

Have 06 lincon zephyr ! some times shifts hard prematurely at low speeds! dealer says needs new trans and that updating pcm/tcm software would not help! seems crazy that o6 with only 80k on it can not


crazy as it sounds a hard shift is a good sign that you have a good transmission. i don't know this particular transmission but weather it is controled buy manual valves or a computer i believe the problem will be with that part of its control, a restrictive valve or stopped up modular.

Nov 22, 2014 | Cars & Trucks

1 Answer

The 2005 equinox has 80000 kilos and now the transmmision is not working. Is there a fuse or transmmision modular that can be replaced and what location on the SUV


Tell me what the transmission is doing that you do not like.Yes there is a fuse(trans or ec2)in the fuse box that powers the transmission.No there is no modulator.

Mar 25, 2011 | 2005 Chevrolet Equinox

3 Answers

Fuel pump location


HI. This assembly is modular and it is located inside the fuel tank. It will be required to lower the fuel tank in order to access the modular pump assembly. Here is a diagram that will help you understand the modular assembly.

8a778b1.jpg

May 25, 2010 | 2004 Chevrolet Malibu

1 Answer

Wont shift out of first gear


Your vehicle is horrendously notorious for internal transmission failure. You can try a product such as Lucas Transmission fix, available at most parts stores, and walmarts. I have used it in the past and it can be a cure all for transmissions. However no product can fix transmission failure. Have a transmission shop drinve and inspect your transmission, It most likely will require an overhaul.

Dec 11, 2009 | 1996 Dodge Caravan

2 Answers

Transmission stuck in neutral


There are diagnostic pressure tests that can be performed at a shop. Requires special adapters,guages and spec sheet. Most likely trans failure. Possible failed torque converter or front pump.

Mar 30, 2009 | 1999 Ford Windstar

1 Answer

Transmission


Well ,

If the fluid is dark, burnt , or has metal or dark clutch material.
The transmission has a burnt up clutches ,the sun shell in most cases with this transmission is the cause of failure inside.The sun shell holds the clutches and steels in place . When the sun shell breaks the transmission is loosing pressure inside. Then the clutch are not engaging . This is why the transmission is slipping This is a very common problem with this vehicle. The sensors/ soleniods are located in the valve body of the transmision. There are some cases where a transmission shop can tighten the sun shell or bands. This could be a temporary fix, The best thing to do is have the transmission replaced or rebuilt at your local transmission repair shop

Oct 19, 2008 | 2000 Chevrolet Venture

Not finding what you are looking for?
2002 Volkswagen Passat Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...