Question about 2001 Ford Expedition

1 Answer

No. 5 amp fuses keep blowing - 2001 Ford Expedition

Posted by on

  • crazzzyluke May 07, 2010

    no just number 15 everytime i put one in it. it blows

  • Gil Nolasco May 11, 2010

    On what component? Are you saying all 5 amp fuses are blowing?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 196 Answers

Ac and cruise control factory recall they need to install a fuseable link to prevent fire call your local ford dealer it free install 2 mins then put your new fuse in should fix it

Posted on May 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Will it hurt to replace the 20 amp fuse in my cigarette liter to a 25 amp it keeps blowing fuses


I am wondering if the fuse blows instantly or whether it lasts a while?

Fuse ratings for cars are usually mean or average values so a 20 amp fuse needs roughly 40 amps to cause it to instantly fail. I have not heard of a cigarette lighter needing that much current so I guess there is a fault that should be located and cured before you have a fire.
Maybe it is the element that is faulty...

I think fitting a 25 amp fuse would be slightly foolish...

May 12, 2017 | Cars & Trucks

1 Answer

30 amp starter fuse keeps blowing on 98 cherokee


you may have a short (verify the integrity of the insulation of the positive wire from that fuse going to the rear window defroster, check the relay & switch.) try to replace the relay.

Oct 03, 2015 | Cars & Trucks

1 Answer

My 2008 suzuki grand vitara keeps blowing the fuses for the ACC outlets. both are 15AMP, but even with nothing plugged in, nothing down in the outlets and even with larger AMP fuses, they keep blowin


If you use too large a fuse, the wiring can catch on fire, and the whole car could burn up. You'll need an auto electrician to trace that problem. You can remove any bulb and unplug any device that is on the Acc(essories?) circuit; then see if a fuse will stay; start replacing items till you blow the fuse. It seems like a dead short which can surely melt wires if you keep taking chances. good luck.

Feb 14, 2015 | 2008 Suzuki Grand Vitara

1 Answer

Fuse keeps blowing


Once a fuse blows & you replace it-- ONE Time--
then you stop

You go to wiring diagrams of the circuit with the
blown fuse & start your testing

Aug 11, 2014 | 1994 GMC Sonoma

1 Answer

Keep blowing a 350 amp fuse


check your battery cables for corrosion

Sep 03, 2012 | 2010 Renault Laguna dCi

1 Answer

What causes fuse #5c in my 1996 buick park ave. to keep blowing?


A fuse that keeps blowing is probably the result of a wire that is grounded unintentionally. This would be the result of an exposed power wire touching the engine or body and grounding out. This would cause an excessive power draw and blow the fuse. The other option is that the fuse was lower amps than the original one. check the fuse diagram to see if the amps match up.

May 29, 2012 | Buick Park Avenue Cars & Trucks

1 Answer

1992 gmc pickup keeps blowing heater fuses I replaced the blow motor and it keeps blowing


Have you replaced the blower resistor . some times they can cause the fuse to blow . You may need a muiltmeter to test the current draw on the blower motor circuit. the draw should be less then half of the rated fuse .( 20 amp fues draw is less then 10 amps) You did not say but does the blower work on high only or the lower speeds with out blowing the fuse ? if it does work on low or high with out blowing the fuse i would replace the blower resistor

Mar 06, 2011 | GMC Sierra 1500 Cars & Trucks

1 Answer

All the lights work except the dash lights. The 5 amp fuses keep blowing and if I put a 15 amp it doesnt blow but no dash lights


DASH HAS A SHORT CIRCUIT.DASH NEED REPLACING BUT CHECK FOR SHORTS IN THE WIRES TO DASH.DONT PUT A LARGER AMP FUSE IN A CIRCUIT TO KEEP FROM BLOWING FUSE BECAUSE IF FUSE DONT BLOW WIRES GET HOT IN THE CIRCUIT THAT HAS A SHORT IN IT AND CAUSE A CAR FIRE.

Nov 04, 2010 | 1992 Ford Thunderbird

2 Answers

2009 e250 keeps blowing 10 amp parking fuse then


if it keeps blowing the fuse you have a short in the wiring

Sep 11, 2009 | 2009 Ford Econoline Cargo

1 Answer

20 Amp FP/ASD Fuse #21 keeps blowing.


hmm. lt look like there are poor joints in your wiring specially the groung wire. check the diagram of your auto. check the unit diagram for which the fuse blows. usually the fuse blow when there is a short circuit. if you look around you will find it.
good luck
ehsan.

Jan 20, 2009 | 2002 Dodge Neon

Not finding what you are looking for?
2001 Ford Expedition Logo

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...