Question about 2004 Chevrolet TrailBlazer
Trailblazer 2005. my window was slightly crack during a rain storm now my passenger window will not roll down how can I trouble shoot
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The problem may be in the wiring which if you pull up the carpet on the front passenger side by
removing the door floor trim and lifting the carpet you will see the
wiring underneath. Probably laying in water or has been. Look for splices in the
wiring which will have corroded. Repair the wiring then check the fuse.
Another problem may be in the motor found inside the door. The brushes may have worn out. If so you need to replace the motor. Ususally the drivers side will fail first since it is the most used.
Posted on Dec 21, 2008
hello the lens has to come out.There is the plastic grill in front of the lights this has to come out.some are clipped in some have tiny screws .You will have to put the hood up.once this piece is off there should be two clips that hold the lens in pull up carefully slide out lens to get to bulb.twist out socket.reverse order. you can do this! thank you
Posted on Jan 26, 2009
Not much info you gave....manual or power? I either way, if it is power, your switch may be bad in the door panel....most pop off and you can disconnect it and reconnect it to check it. Unplugging the battery for up to 5 minutes also helps in resetting relays.
If the switch works then it is very possible that the motor has gone bad. If it sounds like it wants to go down, then the motor is bad.
If manual, the nylon roller could have jack-knifed in the window glass sash. Removing the door panel will be able to let you see what is really wrong.
Posted on Jul 25, 2009
the drivers door switch is most likely bad, they get used the most and wear out first, the connector on the back of switch may have come loose and not making good electrical contact, remove switch and check connector and if still not working need new switch, the windows are all on same circuit and either all work or none work so not fuse. extremely rare is a short in wired but not likely.
Posted on Aug 18, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you should be able to see everything. Your regulator may be bad or the window's caught on somethign
Posted on Oct 08, 2009
Tips for a great answer:
Jul 12, 2011 | 2005 Chevrolet TrailBlazer
Apr 03, 2011 | Mazda MPV Cars & Trucks
Dec 27, 2010 | 2005 Ford Explorer
Feb 22, 2018 | 2006 Chevrolet Trailblazer
May 09, 2017 | 2006 Chevrolet Trailblazer
Jul 15, 2010 | 2006 Chevrolet Trailblazer
Dec 31, 2009 | 2005 Chevrolet Equinox
Jun 14, 2009 | 1999 Toyota Camry
Mar 22, 2009 | 2007 Chevrolet Equinox LS New Cars
200 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: