Question about 2001 Chrysler Town & Country

1 Answer

Fan for Ac and heater does not work on 2000 T & C van. It only works on low or high. All other settings are the same as low

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 6,826 Answers

Replace the resister module for the fan,this is what controls the speeds,and most of the time the blower motor is what causes the module to go out,

Posted on May 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1977 Buick blower / fan comes on however NO heat blower / fan also blows very low.


Buick LeSabre Heater - RepairPal

repairpal.com > Problems > Buick > LeSabre
Buick LeSabre Heater blows only cool air...even w/ defroster on. This is a ... Heater fandoesn't come on . ... The blower works but there is no heat coming out.

Blower Motor Problems ' Auto Repair Help - YouTube

? 4:22
https://www.youtube.com/watch?v=2vmfxYg8LoY
Sep 27, 2009 - Uploaded by mgittelman
The blower motor is a common heater/AC repair within the skill level of ... However if the power wire is a single light purple wire and the ... for blower motor and fuel and relay good but no powercoming on both any ideas? ... my o5 seira, when i start the engine with the air switch on it blows my blower fan ...

Car Air Not Blowing, Heat & Air "How to" Test Testing ...

? 6:22
https://www.youtube.com/watch?v=hgar6Q1lV6A
Apr 5, 2013 - Uploaded by Fixbook
Here I show how to determine the problem if your air, or blowermotor is not ... Click here to check out the the "Car Runs on 2 cylinders" series: ... How to Fix Over-Heating engine & No Heat in car - Buick (2000 yr) Park Ave . ... Car fan / AC only works on high - Replacing the Blower Resistor - Duration: 4:24.

Buick Park Avenue Questions - NO HEAT!!! - CarGurus




Jan 30, 2016 | 1977 Buick Electra

1 Answer

98 Olds van, how does the high/low cooling fan work?


I'm showing three fan relays in the wiring diagram.
The fans are powered by two 30amp maxi fuses. The relays and fan motors are grounded thru the engine computer. The computer takes input from the coolant sensor and the ac control to decide when fans are needed. You would need to know if the computer is grounding the relays, and if not, why not. You may need a scanner to monitor computer output.

Jun 28, 2013 | 1998 Oldsmobile Silhouette

1 Answer

Low and medium speed fan for ac does not come on, while high speed fan works. 2000 1500 dodge van, had new condensor unit under dash replaced recently.


Blower motor resistor needs replacing. Follow wires from blower motor to connector, which should be the resistor. Usually in duct work, held in by 2 small screws.

Jul 25, 2011 | 2000 Dodge Ram 1500 Truck

1 Answer

AC and Heater fan will only work on high speed, all fuses good. any ideas thanks, Dave


When the blower fan will only work on high speed setting this means the fans speed control resistor is burned out, when it fails the fan defaults to high speed only. The fan resistor is located next to the fan and held into the cooling air duct by 2 screws near the blower motor. The part is fairly cheap and easy to replace.

May 11, 2011 | 2000 Mercury Villager

1 Answer

Why does my heater in my 2000 ford ranger only work on the high setting?


I assume that you are talking about the heater fan?

Your heater FAN has at least 3 settings, and for our purposes we will assume low,med and high

Low and medium run through a resistor High is wired direct
Either your resistor is bad or your fan is
I know it seems wrong that the fan could be shot but it could be pulling so many amps that it won't work in any other mode than high
I just had this happen on one of my trucks
Start with the fan

Apr 06, 2010 | 1998 Ford Ranger SuperCab

1 Answer

Heater & cooling fan only works on high.Power locks don't work.


there is a resistor for the heating and cooling fan speed. this controls the amount of voltage to your fan, which controls the speed. usually when the fan only works on high it will bypass the resistor and use the full 12 volts for the high setting. your power locks might be part of this circuit. i would check the resistor first then check the locks. usually the resistor is behind the high low switch

Mar 26, 2010 | 2000 Pontiac Montana

1 Answer

Heater & AC will not blow any air.


there's a resistor pack for the fan that allows it to work at different speeds. does it work on the high setting but no others? if so, it's the resistor pack at fault. it's mounted on the fan under the passenger side of the dashboard. you may have to pull the glove box down and use an extension to get to it. if it doesnt work on high or at all, try to pull the connector off of the fan under the dash, turn the ac on and check for proper voltage and ground. it should just be a plain old red wire and a black wire. the red is power. the black is ground.

Feb 16, 2010 | 2000 Acura TL

2 Answers

1998 Astro Van Heater AC Blower only works on medium & Low


Yes, in high it bypasses the resistor and uses a high blower relay. But I think on 1998 Astro the High relay and the resistor are built together. It should be mounted in the blower box real close to the blower motor.

Mar 09, 2009 | 1998 Chevrolet Astro

1 Answer

Ac controls quit working blower fan is running on high all thetime. compressor is not working.


fan elays are under hood in black box by battery. 3 of them. 2 for high speed, 1 for low speed. Default is high speed when there is a probem.

Suspect maybe they shorted something out when fixing dent. Did they do any welding on the van? Connecting the cables to the body can sometimes send voltage where it's not wanted.

Nov 06, 2008 | 2000 Nissan Quest

Not finding what you are looking for?
2001 Chrysler Town & Country Logo

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...