Question about 2005 Ford Mustang

1 Answer

Replaced automatic transmission shifter with a rat rod and now the car want start in park with the brake pedal pressed/

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,374 Answers

One of these three items are not working : Manual shift valve, transmission range sensor, neutral safety switch.

Posted on May 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Holden cruze 2009 key stuck in the ignition won't go to off position , can't get it out of park .What is the problem ?


Is it shifter on the floor ?
Ignition Lock Cylinder Control Actuator
If the vehicle is equipped with a floor mounted console gear shifter, it has a ignition lock cylinder control actuator system in the steering column. The ignition lock cylinder control actuator's purpose is to prevent the ignition key from being turned to the OFF position when the transmission is in gear and the vehicle may still be moving. The column ignition lock system consists of a ignition lock cylinder control actuator , and a park position switch that is located in the A/T shift lock control switch. The ignition lock cylinder control actuator contains a pin that is spring loaded out to mechanically prevent the ignition key cylinder from being turned to the lock position when vehicle transmission is not in the Park position. If vehicle power is lost, and/or the transmission is not in the Park position the operator will not be able to turn the ignition key to the lock position and will not be able to remove the ignition key from the column.

GM had problems with these ! Has a TSB - technical service bulletin !
Automatic Transmission Shift Lock Control Description and Operation
The automatic transmission shift lock control system is a safety device that prevents an inadvertent shift out of PARK when the engine is running. The driver must press the brake pedal before moving the shift lever out of the PARK position. The system consists of the following components:
• The automatic transmission shift lock solenoid (serviced as the automatic transmission shift lock actuator), as well as the body control module (BCM) and the engine control module (ECM). The shift lock solenoid is located within the floor shift control assembly with vehicles equipped with floor shift.
• The BCM controls the voltage to the shift lock control solenoid through the shift lock control solenoid controlled voltage circuit. The following conditions must be met before the BCM will remove voltage from the shift lock solenoid:
- The ignition is in the ON position.
- The engine control module (ECM) sends an input via GMLAN serial data to the BCM indicating the transmission is in the PARK position.
- The BCM determines the brake pedal is applied according the brake pedal position.
Since the shift lock control solenoid is permanently grounded, the BCM supplies voltage to the automatic transmission shift lock control solenoid, mechanically locking the shift lever in the PARK position as the solenoid energizes. When the brake pedal is applied, the BCM turns the control voltage output of the shift lock control solenoid OFF, de-energizing the shift lock control solenoid. The de-energized solenoid releases the mechanical lock allowing the driver to move the shift lever out of the PARK position. When the transmission is out of the PARK position, the shift lock control solenoid remains de-energized.
During remote start operation, the BCM will energize the shift lock control circuit, locking the shift lever in the PARK position.
Replaced shifter on a cobalt , broken plastic part inside , wouldn't press on micro switch to disengage ! Found replacement shifter at auto slavage yard .$20.00 US

Sep 03, 2016 | Holden Cars & Trucks

2 Answers

Why won't 98 Buick century shift into any gear?


is it a linkage issue? if the shift lever is working and you can feel the detents, check your fluid make sure it is full and clean, if not you could have internal issues with the trans

Oct 30, 2015 | Buick Cars & Trucks

1 Answer

Stuck in park will not shift


Automatic Transmission Shift Lock Control System
The automatic transmission shift lock control is a safety device that prevents an inadvertent shift out of PARK when the ignition is ON. The driver must press the brake pedal before moving the shift lever out of the PARK position. The system consists of the following components:
?€¢
The automatic transmission shift lock control solenoid.


?€¢
The automatic transmission shift lock control switch.


?€¢
The park/neutral position switch.

With the ignition in the ON position, battery positive voltage is supplied to the park/neutral position switch. When the transmission is in the PARK position the contacts in the park/neutral position switch are closed. This allows current to flow through the switch to the automatic transmission shift lock control switch. The circuit continues through the normally-closed switch to the automatic transmission shift lock control solenoid. The automatic transmission shift lock control solenoid is permanently grounded. This energizes the automatic transmission shift lock control solenoid, locking the shift linkage in the PARK position. When the driver presses the brake pedal the contacts in the automatic transmission shift lock control switch open, causing the automatic transmission shift lock control solenoid to release. This allows the shift lever to move from the PARK position.
Park Lock Solenoid
The park lock solenoid is a safety device that prevents an inadvertent shift out of PARK when the key is in the OFF position. The key must be in the RUN position to release the park lock solenoid. The system consists of the park lock solenoid. With the ignition in the ON position, voltage is supplied to the park lock solenoid. The park lock solenoid energizes through a permanent ground unlocking the shift lever. With the ignition in the OFF or ACCY position the park lock solenoid de-energizes and locks the shift lever in the park position.
Shift Lever Does Not Move with Brake Pedal Depressed
DEFINITION: Transmission shift lever will not move out of the PARK position with the ignition ON and the brake pedal pressed.

1

Did you perform the Symptoms - Automatic Transmission Shift Lock Control tests and all the necessary inspection?
Go to Step 2
Go to Symptoms - Automatic Transmission Shift Lock Control

2

  1. Turn ON the ignition, with the engine OFF.
  2. Press and hold the brake pedal.
  3. Attempt to move the shift lever out of the PARK position.
Does the shift lever move out of the PARK position?
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
NO Go to Step 3

3

  1. Turn OFF the ignition.
  2. Disconnect the automatic transmission shift lock control switch.
  3. Turn ON the ignition, with the engine OFF.
  4. Press and hold the brake pedal.
  5. Attempt to move the transmission shift lever out of the PARK position.
Does the transmission shift lever move out of the PARK position?
Go to Step 6
Go to Step 4

4

  1. Turn OFF the ignition.
  2. Disconnect the automatic transmission shift lock control solenoid.
  3. Turn ON the ignition, with the engine OFF
  4. Press and hold the brake pedal.
  5. Attempt to move the transmission shift lever out of the PARK position.
Does the transmission shift lever move out of the PARK position?
Go to Step 7
Go to Step 5
Inspect for poor connections at the harness connector of the automatic transmission shift lock control solenoid. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.
Did you find and correct the condition?
Go to Step 10
Go to Step 9

6

Inspect for poor connections at the harness connector of the automatic transmission shift lock control switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.
Did you find and correct the condition?
Go to Step 10
Go to Step 8

7

Repair the short to battery positive voltage in the A/T shift lock control solenoid supply voltage circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you complete the repair?
Go to Step 10
--

8

Replace the automatic transmission shift lock control switch. Refer to Stop Lamp Switch Replacement in Lighting Systems.
Did you complete the replacement?

Oct 13, 2015 | 2006 Hummer H2

1 Answer

Fuse for brake lights keeps blowing out, shifter won't go into gear


Your vehicle has a safety system that won't let you take it out of park unless you have the brake pedal pressed ! Your brake switch could be shorted inside causing fuse to blow !
Shift Interlock System A brake/shifter interlock mechanism prevents shifting the transmission out of the PARK position unless the brake pedal (2455) is applied. The system consists of the following components:
  • an actuator activated by the key interlock assembly and brake pedal pressed input.
  • necessary wiring.
The system operates as follows:
  • The actuator is energized when the ignition switch is turned to RUN, locking the transmission range selector lever in the PARK position. When the brake pedal is applied and the stoplight switch (13480) is activated, the shift lock actuator is deactivated.
  • The transmission range selector lever can be moved out of the PARK position.
The ignition/shifter interlock cable (3F719) locks the transmission range selector lever in the PARK position when the ignition switch is in the LOCK position. It also requires the selector lever to be in the PARK position to turn the ignition switch to the LOCK position.

Sep 02, 2015 | 1998 Lincoln Mark VIII

1 Answer

Ford f150 shifter


Some year models have a electric lock on the brake pedal lever under the dash. Usually you can check it by pressing the brake pedal and observing the brake lights. If you lose this signal, the shift lever will not move from Park.

There can also be a shift rod inside the steering column which is linked to the ignition key. The shift rod can also be affected by the brake pedal switch failing to release the selector from Park. All 3 parts, ignition shift rod, brake pedal switch, and transmission release are adjusted together. Meaning if 1 does not work, the other 2 can be affected.

Dec 02, 2013 | Cars & Trucks

1 Answer

Starter/steering column issues


There are 3 components which must align to make the starter work. Check your Brake lights and see if they work, because the brake pedal must be pressed to send a signal to the starter solenoid. At the top of the brake pedal lever, this switch is often bumped by Drivers' feet. The other 2 alignments are the gearshift and the Ignition keyswitch.
Some of the Ignition keyswitches are made with a slotted mount and you adjust the rod length by sliding the mount to where it works and tightening it down.
The transmission cable/rod must position the assembly in Park.
The idea overall is that they want to stop runaways. The system verifies the Brake pedal is pressed, the vehicle is in Park, before allowing the Ignition key to turn or send a start signal.

Jun 28, 2013 | 1999 Ford Expedition

2 Answers

My Dodge Intrepid will not shift out of park. Does it have a safety switch on the brake pedal ?


Yeah, all cars with automatic transmissions do. Press the brake while shifting from park.

Jun 23, 2011 | 1995 Dodge Intrepid

1 Answer

My shifter won't shift. It seems like it is locked. I press on the brake but the little knob on the shifter that you need to push in to engage the shifter won't budge.


I'm assuming you're talking about an automatic transmission. When you press on the brake pedal, you engage a switch under the pedal which turns your brake lights on, and also engages a solenoid in the shifter which allows you to shift the car out of Park.

That said, are your brake lights working? If your brake lights come on when you press the brake pedal, chances are the shifter solenoid/actuator is broken. If your brake lights DO NOT come on when you press the brake pedal, chances are you have a faulty brake light switch.

Regardless which part is to blame, these are pretty simple and inexpensive repairs.

Good luck, and if this helped, please rate my answer!

Feb 03, 2011 | 2003 Ford Focus

1 Answer

Jeep stuck in park!


Unsrew the top of the shifter and reattach the rod for the button

Jul 29, 2009 | 2003 Jeep Wrangler

2 Answers

Transmission problem with 2001 Ford Escort


Sounds like a problem with the shift interlock.Here's how it works:You put your foot on the brake pedal,the brake pedal switch sends voltage to a solenoid mounted on your shifter.The solenoid unlocks the shifter,and you remove it from Park.When the interlock doesnt work,it's usually the interlock solenoid mounted on the shifter malfunctioning,however the brake pedal switch,or wires to and from can also be at fault.

Jul 11, 2008 | 2001 Ford Escort ZX2

Not finding what you are looking for?
2005 Ford Mustang Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...