Question about 2004 Chevrolet Tahoe

1 Answer

Theres a crazy looking bolt holding my front seats in place, how can i get the bit to remove them

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 12,104 Answers

Its a-- torx head bolt--looks like a weird star shape basically any place that sells tools carry s them also a few auto stores carry them

Posted on May 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the original seat covers from a PT Cruiser driver seat


get under the front seats there are 4 bolts holding the seats in the floor plus a torx bolt for the lap belt, take seats out the back seat has 2 torx bolts at the front bottom of the lower cushion remove them and pull the bottom forward the back has 2 bolts holding it remove them and lift the unit straight up, be carefull there is wires under the front seat for the seat belt warning light carefully unhook them 1 for each seat now you need hog ring plairs and a bunch of new hog rings to secure the new fabric, use side cutter plairs to remove old hog rings carefully remove the seat covers, hog rings can be got at car glass shops the pliars can be got from summit racing or a place that sells car uppolstrytake your time and you can do it!!

Oct 29, 2014 | Chrysler PT Cruiser Cars & Trucks

1 Answer

How to remove rear seat of 1997 Mercury Sable


Most rear seats are held in with clams and screws . Look under the swab (bit you sit on) for screws or bolts holding the front of that part down. remove and lift out. Then you should see two more at the bottom of the seat back holding it in . Remove these and lift the back bit straight up off the retaining clips.. take a trip to the wreckers if you are in doubt.

Mar 28, 2013 | Mercury Sable Cars & Trucks

1 Answer

How do i get the front seat out of my 93 cadillac deville


there are 4 bolts that hold the seat to the floor.remove the bolts first as you will have to move the power seat to get to some of the bolts.then look for and disconnect all the electrical connectors that go from the floor to the seat.then remove the seat from the car.you may have to turn the seat or get it into a position to remove it from the car for clearance.

Feb 09, 2012 | 1993 Cadillac DeVille

1 Answer

How to remove the rear seat


Rear seats are fastened in many different ways. On most cars, the base part of the seat is held in place by a metal snap going into a hole. To remove, pull on the front of the seat. Some cars have a metal or plastic tab that has to be pulled, pushed, or moved to the side, while pulling on the front of the seat. Other cars, mainly German, use bolts or screws in the front to hold the base of the seat. Many American car seats (GM) have a hook that fits into a metal brace. To remove the bottom part of the seat push hard towards the back and then up. Most Hondas use a bolt (10MM) on the back part of the seat between the bottom part of the seat and the back support (towards the middle) that has to be removed. Then the seat can be pulled up from the back. Before you pull on a seat, try to analyze what is holding it. Most seats do not need a lot of force to be removed, they all have a trick.
The back support on the rear seat is a bit more standard in the way it is fastened. At the top, there are 2, 3 or 4 pieces of metal that go into a hole. There are 2 or more bolts that hold the backrest at the bottom. Once you have removed the bottom part of the seat, take the screws or bolts out, and slide the back rest up and out. On a few cars you have to remove the rear deck and other side panels out first. If you can't figure it out, remove the panels in the other side of the backrest (trunk) and examine carefully how the seat is fastened.

Hope this helps, good luck!

Jul 27, 2010 | 2001 Kia Sephia

1 Answer

Trunk won't open.


on the front of the seats the bottom part you sit on check for two bolts if it has two remove them if not its easier, either way if there is nothing securing the front down, reach in under the seat between the top and bottom bit where the seat belts stick out of, feel around the middle section and there may be a looped rope material pull it and the bottom seat should just pop straight out, there will be two bolts holding the top part of the seat in, removethese and lift up and farward, the seats till be out,

Jun 22, 2010 | 2000 Mercury Cougar

2 Answers

How do i take out a 2002 impala front seat in order to replace the power seat motor?


the front seat in the impala does not have front bolts...there are 2 bolts in the back..remove then pull back on the seat and lift out !

Jun 04, 2010 | 2002 Chevrolet Impala

1 Answer

Need to remove 2004 Yukon drivers seat. how do


there are plastic covers over the front bolts that hold the seat to the floor remove the screws the hold these covers on then remove the two front bolts under these covers then move the seat all the way forward and you should be able to see the two bolts that hold the rear of the seat to the floor pan there could be covers on these to remove the bolts and then tip the seat forward and unplug the wire connector for the power seat(if it has this option).hope this helped

Jan 01, 2010 | 2004 GMC Yukon

2 Answers

Remove rear seat impala2007


To remove the rear seat, pull up on the front of the seat bottom, it should be hooked in place by spring type clips. After you get the front edge up, pull out the seat. This should expose the bolts/screws that hold the seat back in. Look below and there should be a couple of screws holding the seatback to the car body. Remove these and then you can pull the seat back out of the car.
K

Aug 29, 2009 | 2007 Chevrolet Impala LS Sedan New Cars

2 Answers

Removing front and back speakers in 1991 Grand Am....


There is a lot involved in replacing these speakers. You should also know that the original factory speakers are 10 ohm speakers. This means that if you replace them with new speakers (most of which are 4 ohm) you run the risk of damaging the stereo, the speakers, or both. This can also cause a potential fire hazard in your car. If you want new speakers, you really should look at installing a new stereo as well.

To get to the back speakers, you will need to remove 2 bolts located under the front edge of the rear seat (bottom). After you remove the bottom, you will need to remove the rear seat (back). This involves removing the bolts that hold down the rear seat belts, which is a large sized torx bit (T-45, T-47, or T-50... Don't remember which). After removing these, lift straight up on the seat back to remove. Now remove the deck brake light housing, and the bracket that holds it. Now the deck cover can be removed. Be careful not to bend it too much getting it out from under the side trim on both sides.

For the front speakers, you must disassemble a good portion of the dash. Remove the screw holding the light switch and the wiper switch housings. This screw is underneath each housing. Once removed, there are dash mounting screws behind them. These screws (and many of the other dash screws) are a smaller torx-bit (T-10 or T-15, don't remember which). Sometimes they use a 7mm bolt. There is a cover panel just above the glove box. This panel is held on with 2 screws located in the glove box. After removing this panel, you will find 2 or 3 bolts holding on the dash. Last but not least, you will find 2 bolts inside each of the defroster vent grilles. These grilles just snap out for easier access to the bolts.

1991 Pontiac Grand Am Car Radio Stereo Audio Wiring Diagram
Car Radio Battery Constant 12v+ Wire: Orange
Car Radio Accessory Switched 12v+ Wire: Yellow
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Gray
Car Stereo Dimmer Wire: Brown
Car Stereo Antenna Trigger: Pink
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: 4" Round
Car Audio Front Speakers Location: In Dash
Left Front Speaker Positive Wire (+): Tan
Left Front Speaker Negative Wire (-): Gray
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Dark Green
Car Audio Rear Speakers Size: 6" x 9" Oval
Car Audio Rear Speakers Location: Rear Deck
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Dark Blue
Right Rear Speaker Negative Wire (-): Light Blue

Nov 30, 2008 | 1991 Pontiac Grand Am

Not finding what you are looking for?
2004 Chevrolet Tahoe Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...