Question about 2006 Ford Fusion

1 Answer

Hearing a steady ping coming from engine and check engine light is on for 2007 Ford Fusion. Doesn't seem to be any performance problems.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 17,970 Answers

You can buy your own diagnostic code scanner. Amazon has some cheap ones for around $40. You can pull the code yourself, and erase the code and turn the light off. If you have any autozone early, they can read it for free.

With this "number code" you can look up to find out what is the problem is. Then you can go to the mechanic with the printout and say, here's the code and the problem, then...

Several components there, your problems may be caused by incorrect valve timing or ignition timing, or your knock sensor might be operating out of range. Try replacing it to re-check problem. Also check for proper EGR valve operation.

Start with one scan fault codes and tell us news.

Posted on May 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2014 ford fusion engine wont crank after wreck


Ford fusion won't start - YouTube

? 2:01
www.youtube.com/watch?v=H0BhHWT2cyY
Sep 16, 2014 - Uploaded by mlmunoz21
Ford fusion won't start ... Published on Sep 16, 2014 .... 2004-2008 F150 Died Out No Crank Theft Light ...

Ford Fusion won't start - YouTube

? 0:32
www.youtube.com/watch?v=lmH7R6Ebmyc
Jan 9, 2015 - Uploaded by Nicholas A.
Any ideas why it won't start? 2007 ford Fusion awd 6 cylinder. ... And P1260 2007 Ford Fusion - Theft ...

Nov 02, 2015 | 2014 Ford Fusion

1 Answer

Where is the TCM located on a 2007 ford fusion 2.3


ford fusion V6 ,our fusion is only a little car with mainly a diesel engine here although some are petrol with a 1.4 citreon/peugeot engine

Nov 21, 2014 | 2007 Ford Fusion V6

1 Answer

The wrench comes on when 20-07 fusion downshifts


You have no OBD 2 Codes shown here,
we have nothing to work with

Aug 18, 2014 | 2007 Ford Fusion 1.4

1 Answer

Ford fusion gas cap light keeps coming on


Any number of EVAP System issues

What was the code?

A small leak doesn't just have to be a gas cap

Have the system smoke tested

Jun 10, 2012 | 2007 Ford Fusion I4 SEL Sedan

1 Answer

Reset check engine light ford fusion 2007


First fix the problem that made the check engine light come on. Then unhook your negative battery cable for 10 minutes to reset code in the computer. Mike

Jun 19, 2011 | 2007 Ford Fusion I4 SEL Sedan

1 Answer

HOW BAD DID I HURT THE ENGINE ON MY FORD FUSION 2.3L IF IT WAS BLOWING OIL OUT OF AN IMPROPERLY INSTALLED OIL FILTEROIL LIGHT CAME ON ADDED OIL NO KNOCKING AT TIME OF GETTING IT FIXED


As long as you fixed the filter and it is refilled now and you aren't hearing any noise it is likely ok. But you will just have to drive it for a while and see

Apr 12, 2010 | 2007 Ford Fusion I4 SEL Sedan

1 Answer

I have a 2007 ford ranger, 6 cylinder. I drove


The oil pump may have gone bad. Involves dropping the oil pan and replacing the oil pump, check the pan for any metal peices.

Mar 06, 2010 | 2007 Ford Ranger FX4 Off-Road

1 Answer

2009 ford fusion engine light stays on steady


You just have to disconnect the battery for 1/2 hour. then reconnect and drive for 10 miles so computer can relearn your engine again. It may run rough. You should have the key off when refueling because computer sensed a fuel vapor leak during fueling and turned the light on.

Also, you can always drive with a check engine light on. It just means you are not meeting emissions. Do not drive if it's flashing on and off.

May 23, 2009 | 2006 Ford Fusion

1 Answer

Ford Fusion 04 Engine Management Light


I had a 2002 model 1.4 Fiesta, same problem Engine management light or ECA, electronic accelaration Control (EAC), it needs a ford dealer to do a computer diagnostic, most likely that it will need replaced.

Mt friend who is a mechanic for ford said that it was a common factory fault and is very common in 1.4 zetec /duratec petrol models.

I now have a 2007 Fusion and was quick to see if this problem had been sorted on this model, and it has!!

Hope this helps!!

Nov 19, 2008 | 2004 Ford Fusion

Not finding what you are looking for?

Open Questions:

See all 2006 Ford Fusion Questions

2006 Ford Fusion Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...