Question about 2005 Peugeot 405

2 Answers

At what millage does the cambelt require changing on a peugeot 407 2.0 turbo diesel please

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Around 144k or every 10 years which ever comes first..;)

Posted on May 19, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Peugeot Master
  • 2,019 Answers

Just a guess, but most cam belts seem to have a recommendation of every 60k miles, or about every 5 years even if not driven.

Posted on May 06, 2010

  • Kirk Augustin
    Kirk Augustin May 19, 2010

    I see the manual recommends:



    Every 96,000 miles on the HDIs or 10 years.



    And they also recommend changing the water pump at the same time, since it is about the same opeation and location.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turbo not working on peogeot 407 2l diesel hdi 16v 2007 sport car


Check egr valve system, check turbo boost solenoid, is it hot ? It should be war but not hot. Check turbo waste gate. Remove the black assy that hold the butterfly valves inside that the turbo air hoses connect onto to and make sure they work by sucking on the tubes to activate them, they are sring opened or closed and the engine vacuum system opens or closes them.

Dec 15, 2013 | 2007 Peugeot 407 2.0

1 Answer

I have a Citroen Diesel ZX19 Turbo. It is Very hard to start when cold and takes a two or three goes to start when hot.I have replaced Glow plugs with Bosch ones from a Citroen dealer only a month ago plus...


Did the poor starting coincide with the cambelt change ,as it sounds like you may have a camshaft/fuel pump timing issue.If the pump/camshaft/crankshaft are not locked in place when you change the belt they can easily move a tooth or two.If the problem didnt coincide with the belt change then it might be a fuel problem.

Jun 02, 2011 | Peugeot 405 Cars & Trucks

1 Answer

What could cause the diesel from not reaching the engime of Peugeot 407 HDi diesel engine


Hi,
Do mean the diesel fuel? Please check the fuel pump for malfunction. You may need to check also the pump relay and power cables. Regards

Mar 08, 2011 | Peugeot 405 Cars & Trucks

1 Answer

Peugeot 407, 2.0 litre diesel, 05,loss of power/air surge heard


I am not familiar with the 407 but I would think it is a HDi, if so what you describe is an air leak from a pipe from the pressure side of the turbo, I have had this on a Saab, in that case there was an over pressure switch under the dash and the pipe fell off. Look at the top of the engine, on the inlet side there will be a pipe from the inlet trunking or manifold, it should (maybe with a tee piece in there) go through the bulkhead

May 18, 2010 | 2005 Peugeot 405

2 Answers

Peugeot 407 2.0 hdi lots of black smoke when you put your foot down past 2000 rpm


The reason for the black smoke is that it is not getting enough air to burn the fuel completely.It could be a blocked air filter,obstruction in the air intake system,blown turbo,hole in tube between intake manifold and turbo,or a fault with the fuel system and injectors.

Nov 06, 2009 | 2006 Peugeot 604

2 Answers

"when do i change the cam belt on a peugeot 307 sw diesel"


usually you should do it for peugeot diesel at 122000 miles along with water pump and the tensioner roller that runs under the cambelt too. But to be on the safe side do it at 100000 and save the fortune.
It took me (DIY job) about 6-8 hours as i wanted to save 450 pounds.

Apr 15, 2009 | 2005 Peugeot 405

2 Answers

Cambelt change peugeot 406 2.1 turbo diesel


have you changed a peugeot or citreon 1.9 or1.9 td, if so its the same.

Mar 07, 2009 | 1991 Peugeot 405

1 Answer

I changed the cambelt on a 406 1.9 turbo diesel it fires but the engine will not run (r reg)


You've probably allowed the crankshaft to move while you had the belt off, putting the timing out by a small amount.There will be some kind of marks top and bottom somewhere to align before you put the belt backon. I need to do this preventative maintenance on my 406 2litre diesel - I'm trying to work out how difficult it is!

Mar 02, 2009 | 2006 Peugeot 604

1 Answer

Cambelt change


i believe it to be 50,000 miles or five years....if your not sure change it its cheaper than an engine repair!!

Oct 27, 2008 | 1991 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

382 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

mike hayward

Level 2 Expert

279 Answers

Wahs Team

Level 2 Expert

215 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...