Question about Jeep Cherokee

1 Answer

1990 Jeep Cherokee stalls when i slow down to stop or turn.I notice the RPMs drop and it cuts off. it also stalls when i put it in reverese.It will crank back up after it stalls. Jeep runs good once it gets going.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 3,640 Answers

Check fuel filter it may be clogging up. also make sure the fuel pressure is ok.

Posted on May 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my 2003 jeep grand Cherokee cuts off when I put it in reverse


engine stalls.?
what cuts off, the radio:?

transmission slips (cuts has no real meanings, to vague)
stalls
misfires
bogs
slips
flares
shakes.
makes odd noise.
does car drive perfect in DRIVE (other shoe drops)

Mar 06, 2015 | Jeep Cars & Trucks

1 Answer

Car stalls when stopping / idle


tune up w/ fuel system cleaner/ flush all your fluids/check trans fliud level if smells burnt change it an filter also

Aug 09, 2013 | Jeep Cherokee Cars & Trucks

1 Answer

2000 Jeep Grand Cherokee transmission no forward or reverse gears will engage when shifter is moved


he moved a shift sensor and they are very touchy . I am sending a picture ask him if can tell me what he touched please thank you. I am a self employed mechanic and will send you the link to my pagehttps://www.facebook.com/TedsRepairs 11_5_2012_11_15_40_pm.png

Nov 05, 2012 | Cars & Trucks

1 Answer

RPMS drop wants to stall somtimes and hesatates in


I'd be curious to the miles on the engine, possible worn rings, poor compression. Start with basics first, be certain there are no vacuum leaks, next look to your fuel system; possible failing fuel pump (low fuel pressure) dirty fuel filter? (I'd start with the filter first, cheapest fix if it is the issue) other concerns could be injectors, plugged or failing (poor fuel spray) run a fuel systems cleaner for several tanks see if it will improve; but change that fuel filter first. Also the volts dropping off would make sence if the engine RPMs drop way off, too slow of a speed the alternator will make little if anything.
I hope this may have helped,
Tom

Oct 02, 2009 | 1994 Jeep Grand Cherokee

1 Answer

Its stalls and hard to start


The next time you have the starting problem, try putting the shifter in the neutral position and try starting. If it starts right up, you have a park/neutral safety switch problem.
As far as the stalling, I would suggest a complete throttle body cleaning as well as a injector cleaning. You can purchase a couple of bottles of Chevron fuel system conditioner. Poor a bottle in the tank and fill with fuel. Run a couple of tanks through and you should notice an improvement.
You might want to stop by your local Auto Zone and ask them to scan your vehicle for trouble codes, it might give you additional clues.
Good luck,
Regards,

Aug 15, 2009 | 1990 Jeep Cherokee Limited

1 Answer

97 Jeep grand cherokee 6 cyl. idles down to 0 and dies.


any leaks in intake or exhaust upstream of the sensors, sparkplug condition and engine controls/sensors for out of range operation (including fuel pressure and condition of regulator)
IAC should be cleaned and checked as this can cause poor idle and shut down. I'm not saying not to change O2 sensors, but unless everything else if OK, it probably won't help.

May 29, 2009 | 1997 Jeep Grand Cherokee

2 Answers

1996 Jeep GC stalling with no warning when driving


my 96 grand cherokee had the same problem with stalling minus the clock reseting part. what fixed mine was an idle air control motor it sits at the back of the throttle body on top of the motor. the part cost about 60 bucks and it hasn't stalled out on me since. i hope this helps you out.

May 18, 2009 | 1996 Jeep Grand Cherokee

2 Answers

1990 jeep cherokee turns off


check your fuel pump relay switch. under hood

Sep 09, 2008 | 1990 Jeep Cherokee Limited

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

225 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...